CALL US: 310-526-8635
MTX :: SledgeHammer SLH-T4510X3-A :: $269.00

MTX SledgeHammer SLH-T4510X3-A

Item# 19629

SledgeHammer Three 10" Thunder4500 Vented Subwoofers Enclosure

Sorry, this product is no longer available.

Highly Recommended Alternatives

  • Vented enclosure with three 10" subwoofers
  • 3/4" MDF construction with carpet covering
  • Three 10" carbon-filled polypropylene woofers with polyether foam surrounds
  • 35-1/4"W x 15-1/4"H x 17-1/8"D1 x 14-1/2"D2
  • Subwoofers are usually sold as a single unit unless otherwise noted.
  • Authorized Internet Dealer
*Warranty: 1 Year Manufacturer warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to for replacement within 30 days from the original date of purchase with proper return authorization. After the 30 day time period, products must be returned to their original manufacturer for the remainder of the manufacturer's warranty period.

Do you own this product?  Write a review

   Dan From Florida
I have the same box and their each 12 ohms wired down to 4 ohms. I'm powering them with the mtx ta8502 bridged 500 wrms at 4 ohms, they pund!!! selling for 3 jl w3's in a sealed box and jl 1000/1, sound way better.

   New Vega From New York
First off, Jason From Glendale dont know crap. their each 4 ohms, bringing them down to around 1.6 ohms. as for a dual channel amp to power em, no. use a mono amp for full power, and make sure it one ohm stable. dont overpower em like that guy or you'll blow em. 2 channel amps are for midrange and treble. as far as this box. its a good buy for the price. 3 12's lots of knock, decent box. value buy.

   Jason From Glendale Arizona
this things pound for 3 low end subs. i used to have this set up til i needed money and sold them. i had half of the power recomended for this and they still beat pretty hard. they are 3 12 ohm woofers bringing them down to a 4 ohm laod. i would recomend geting a 2 channal amp and bridging it so they get full power at 4 ohm. most 2 channal amps run 4 ohm bridged. remember, get a amp that pushes 700w rms @ 4 ohm. they need 675. you can get away with geting a 600w rms @ 4 ohm. but if your like me, id rather over power something, than to under power.