Related Video:
What's Included:
- Class D Mono Block Amplifier
- Owner's Manual
Product Highlights:
- Copper Rail PCB Architecture
- Smart Turn On: Music Sense / DC Sense (High Level Inputs)
- Bass EQ: 0dB - +12dB
- BiPolar Professional Audio Grade Output Transistors
- Phase: 0º / 180º
- Remote Bass Control via RJ45 Jack
- High Speed MosFET Power Supply
- 12dB Crossover Circuitry
- Adjustable Subsonic Filter
- Low Pass Frequency: 50Hz - 250Hz
- Subsonic Filter: 15Hz - 55Hz
- High Level Inputs
- Line In / Line Out
- Power & Diagnostics LED Indicators
- Accepts 4 Gauge Power & Ground Wire // 14 Gauge Speaker Wire
- Maximum Power : 2400 Watts
- Low Frequency Response : 20 Hz
- High Frequency Response : 200 Hz
- Number of Channels : 1
- Frequency Response : 20-200 Hz
- Built In Crossovers : Yes
- Channel Separation : No
- Amplifier Class : D
- Fuse Rating : 40 A
The FXA25001D is a Class D Mono Block Amplifier. This product is part of the Mobile Audio category. It falls within the Flash series. The Class D Mono Block Amplifier features a High Speed MosFET Power Supply. Also included are BiPolar Professional Audio Grade Output Transistors. Copper Rail PCB make up the architecture of the amplifier. An Adjustable Subsonic Filter is built into the unit. The Smart Turn On feature that comes standard takes the Music Sense / DC Sense (High Level Inputs) into account. High Level Inputs are also available. The amplifier has inputs for Line In / Line Out. It also has a 12dB Crossover Circuitry. The Low Pass Frequency registers between 50Hz - 250Hz. In addition, the Bass EQ pushes 0dB - +12dB. Remote Bass Control can be accessed via the RJ45 Jack. Power & Diagnostics LED Indicators assure that everything is functioning properly. The amplifier accepts 4 Gauge Power & Ground Wire/14 Gauge Speaker Wire. The 4 Ohm RMS Power registers 300 Watts x 1, 2 Ohm RMS Power registers 600 Watts x 4 and 4 Ohm Bridge Power registers 900 Watts X 1. It has a Peak Power of 1200 Watts. The Minimum THD is <0.1%. Frequency Response pushes 20Hz - 20KHz and has a Sensitivity of > 96dB. Also included is a Damping Factor of > 100 @ 100Hz. The amplifier has a Mono Channel Separation. The Preamp Input Voltage is 200mV - 6V while the Fuse Rating is 40 amps x 2. Dimensions (L x W x H) are as follows: 11.7" x 9.1" x 2.1"
Specifications |
2 Ohm RMS Power |
600 Watts x 1 |
Preamp Input Voltage |
200mV - 6V |
Damping Factor |
> 100 @ 100Hz |
4 Ohm RMS Power |
300 Watts x 1 |
PEAK Power |
1200 Watts |
Channel Separation |
mono |
S/N Ratio |
> 96dB |
Fuse Rating |
40 amps x 2 |
Frequency Response |
20Hz - 200Hz |
1 Ohm RMS Power |
900 Watts x 1 |
Minimum THD |
< 0.1% |
Dimensions (L x W x H) |
11.7" x 9.1" x 2.1" |
- UPC: 760488895870
- Weight: 7.4
- Authorized Internet Dealer
Warranty: 1 Year Manufacturer warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 year from the original date of purchase with proper return authorization.