A high-end sound, marine certified premium 6.5" coaxial tower enclosure and speaker for boats, off-road vehicles or project vehicles audio installation needs. The enclosure is sealed against the elements and features internal steel reinforcement for strength. The speaker features water resistant components to the IPX67 standard, including midrange cones, titanium tweeters and rust resistant internal connectors. "L" indicates Illumination and can be controlled by the optional N1-RC Wireless RF LED light remote control. One remote will control all "L" speakers. (sold as individual units)
General Features:
- Marine Certified
Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand
- IPX67
Tested to the highest Marine and Motorsports standards for resisting the elements
- 1" Pure Titanium Dome Tweeter
Very smooth musical response, high output with minimal required amplifier power
- Water resistant spider
Woven red aramid fiber composite spider to stabilize the cone and voice coil in all musical situations. Armid fibers do not degrade over time and are not susceptible to temperature swings
- 6.5" Composite Poly Midrange
UVA Protected, water resistant composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame
- High Temperature Voice Coil and Former
Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight
- High Energy Y30 Motor assembly
High energy strontium ferrite magnet for higher output with minimal amplifier power
- Marine Certified Crossover
Conformal Coated, Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection
- Injection Molded Enclosure
Heavy duty ABS cast enclosure provides strength and improved bass response with increased volume while remaining very light weights
- Steel Reinforced
The mounting system between the pipe mount and the tower enclosure has an internal steel mounting plate for additional strength
- Centering Ring
Centering ring allows the speakers to tip left/right when mounted to an arced mount
- Powder coated Die Cast Mounts
Mounting hardware are Die Cast for strength and powder coated to resisted outdoor elements of sun, spray and dust
- Flexible Mounting
Eleven mounting hardware options from 1.5" to 2.75" included
- Illumination
Limitless color choices with color on, off, strobe and programmed “light shows” possible. Optional N1-RC required for control of lighting systems and to sync multiple illuminated speakers. Pre-programmed demo mode included on all lighted systems
- Tower Length
10.6" (270mm)
- Hang Height
9.035" (229.5mm)
- Height
8.4" (215mm)
- Width
8.4" (215mm)
- Weight
3.85lbs (1.74kg)
- Diameter : 6.5 Inch
- Sensitivity : 91 dB
- Frequency Response : 70-20k Hz
- RMS Power Range : 60 Watts
- Peak Power Handling : 120 Watts
- Color : Black
- Product Highlights:
- CERTIFICATIONS IPX67, Conformal Coated, UVA Certified, CEA426B
- RMS POWER HANDLING (CEA426B) 60 watts
- PEAK POWER HANDLING (CEA426B) 120 watts
- IMPEDANCE 4 ohm
- FREQUENCY RESPONSE +/- 10DB 30-22kHz
- FREQUENCY RESPONSE +/- 3DB 70-20kHz
- SENSITIVITY (1 WATT/1 METER) 91dB
- TOWER LENGTH 10.6" (270mm)
- HANG HEIGHT 9.035" (229.5mm)
- HEIGHT 8.4" (215mm)
- WIDTH 8.4" (215mm)
- WEIGHT 3.85lbs (1.74kg)
- COLOR Black
- UPC: 806576224853
- Weight: 8
- Authorized Internet Dealer
Warranty: 1 Year Manufacturer warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 year from the original date of purchase with proper return authorization.
