Engineered specifically for powersports applications, the HX300/1 monoblock amplifier employs our high-speed NexD™ switching design to pack a serious full-range punch, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX6 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles. With a robust 300W of clean power into a 2-ohm load (14.4V, 1% THD), use one to drive a subwoofer, or grab a pair to deliver stunning output to a subwoofer system or full-range satellites.
The HX300/1 also features an adjustable low-pass crossover, a bass boost EQ, variable infrasonic filter and output polarity switch. Its dual-range input section accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals. With the addition of an M-RBC-1 remote level control (sold separately), subwoofer output can be directly controlled from the driver’s seat.
This amplifier features a black powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.
General Features:
- Monoblock Class D Full Range Amplifier
- RMS Power Rating @ 14.4 V:
- 4 ohms: 160 watts x 1 chan.
- 3 ohms: 220 watts x 1 chan.
- 2 ohms: 300 watts x 1 chan.
- 1 ohms: N/A
- RMS Power Rating @ 12.5 V:
- 4 ohms: 160 watts x 1 chan.
- 3 ohms: 200 watts x 1 chan.
- 2 ohms: 250 watts x 1 chan.
- 1 ohms: N/A
- 4 ohms: 158 watts x 1 chan.
- 3 ohms: 271 watts x 1 chan.
- 2 ohms: 354 watts x 1 chan.
- Variable Bass Boost: 0 to +12 dB bass boost at 43Hz
- Variable low-pass filter: 40 - 400 Hz, 24 dB/octave
- Frequency Response: 20 - 12,000 Hz
- Total Harmonic Distortion (THD): <1.0%
- Signal to Noise Ration: 85 dB
- Subsonic filter: 20 - 40 Hz
- Selectable phase: 0 / 180°
- Fuse Rating: 30A x 1
- Dimensions: 8.66"W x 3.09"D x 1.77"H
- 8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
- NexD™ ultra-high-speed switching design
- Black powder-coated finish
- Gasketed cover for the controls
- Stainless steel hardware for durability
- IPX6 water-resistance rating
- M-RBC-1 remote level control (sold separately)
- Controls bass levels only
- LED power (green) and protect (red) indicators
- Accepts RCA (low-level) & Speaker-level (high-level) signal
- Switchable Input sensitivity: 250 mV-4 V (Low) to 750 mV-15 V (High)
- Maximum Power : 300 Watts
- Low Frequency Response : 20 Hz
- High Frequency Response : 12000 Hz
- Number of Channels : 1
- Frequency Response : 20-12000 Hz
- Built In Crossovers : Yes
- Channel Separation : No
- RMS Power Range : 160 Watts
- Amplifier Class : D
- Fuse Rating : 30 A
Product Highlights:
- full-range mono amplifier
- 160 watts RMS x 1 at 4 ohms (300 watts RMS x 1 at 2 ohms)
- variable low-pass filter (35-300 Hz, 12 dB/octave)
- variable subsonic filter (20-40 Hz)
- bass boost (0 to +12 db at 43 Hz)
- Class D amplifier design with NextD™ switching amp technology
- IPX6 water-resistance rating
- corrosion-resistant cast aluminum chassis
- Connection Features
- preamp and speaker-level inputs (speaker wire to RCA adapter required for speaker-level input)
- 8-gauge power and ground leads and a 30-amp fuse recommended — wiring and hardware not included with amplifier
- no onboard fuses — when installing multiple amps in a system, an additional 35-amp in-line fuse between the distribution block and the amplifier is recommended
- frequency response: 20-12,000 Hz
- 8-11/16"W x 1-13/16"H x 3-1/8"D
- UPC: 699440984003
- Weight: 5
- Authorized Internet Dealer
Warranty: 1 Year Manufacturer warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for repair within 1 year from the original date of purchase with proper return authorization.