JX500/1D Mono Subwoofer Car Amplifier 500 watts RMS x 1 at 2 ohms
This rugged and reliable Class D monoblock uses a robust MOSFET power supply design that delivers rock-solid bass performance at a very affordable price. Targeted specifically for subwoofer applications, the JX500/1D includes a low-pass filter with continuously variable cutoff frequency selection from 50-200 Hz. It also features a variable bass boost at 45 Hz. with up to 12 dB of boost and an optional remote boost control. Dedicated hi-level inputs are included, in addition to conventional low-level RCA inputs, making it easy to integrate with a variety of OEM and aftermarket head units.
GENERAL FEATURES:
- JX Series Monoblock Class D Subwoofer Amplifier
- RMS Power Rating (14.4V):
- 4 ohms: 300 watts x 1 chan.
- 3 ohms: 400 watts x 1 chan.
- 2 ohms: 500 watts x 1 chan.
- RMS Power Rating (12.5V):
- 4 ohms: 235 watts x 1 chan.
- 3 ohms: 300 watts x 1 chan.
- 2 ohms: 410 watts x 1 chan.
- Low level input: 200mV - 4V
- High level input: 2.0mV - 10.0V
- Variable Bass Boost: 0 to +12 dB bass boost centered at 45 Hz
- Variable low-pass filter: 50 - 200 Hz, 12 dB/octave
- Frequency Response: 10 - 150 Hz ± 1 dB
- Total Harmonic Distortion (THD): 1%
- Signal to Noise Ratio: >62 dB
- Damping Factor @ 4 ohms: >1000 @ 4 ohms
- Fuse Rating: 50A x 1 inline (not supplied)
- 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
- Unregulated PWM switching type power supply
- LED power (green) and protect (red) indicators
- Soft start turn-on prevent clicking and popping when system turns on
- Speaker-level (high-level) inputs with included harness
- Preamp RCA outputs to daisy chain multiple amps
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Heavy duty aluminum alloy heatsink for effective heat dissipation
- Nickel-plated RCA level inputs
- Nickel-plated screw terminals
- Dual speaker terminals simplify the hookup of multiple speakers
- Remote bass level input (JL Audio RBC-1 sold separately)
- Input sensitivity:
- Low level input: 200mV - 4V
- High level input: 2.0mV - 10.0V
- Variable Bass Boost: 0 to +12 dB bass boost centered at 45 Hz
- Variable low-pass filter: 50 - 200 Hz, 12 dB/octave
- Frequency Response: 10 - 150 Hz ± 1 dB
- Total Harmonic Distortion (THD): 1%
- Signal to Noise Ratio: >62 dB
- Damping Factor @ 4 ohms: >1000 @ 4 ohms
- Fuse Rating: 50A x 1 inline (not supplied)
- 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
CP210-W0V3 Slot-Ported Enclosure with two 10" W0v3 Subwoofers
This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 150 - 600W
General Features:
- 0" Single 4 Ohm W0v3 Series Subwoofer
- Power Handling:
- Peak: 600 watts
- RMS: 300 watts
- 2" High temperature voice coil
- Sensitivity: 84.07 dB
- Xmax: 11.4 mm
- 5-1/16" Magnet diameter
- Mounting Depth: 4-15/16"
- Cutout Diameter: 9-1/16"
- Impedance: 4 Ohm
- Mineral-filled, polypropylene cone woofer for excellent durability
- Large roll surround for generous amounts of excursion
- Elevated frame cooling brings air directly to the voice coil
- Designed for compact sealed enclosures or medium-sized ported enclosures
- Large excursion for louder bass and less distortion
- DMA Optimized motor system reduces distortion and tight, clean bass
- Lead wire woven into spider for added strength
- Metallic silver frame finish
- Number of Channels : 1
- Frequency Response : 10-150 Hz
- Built In Crossovers : Yes
- Channel Separation : No
- Speaker Size : 10 Inches
- Amplifier Class : D
JX500/1D Mono Subwoofer Car Amplifier 500 watts RMS x 1 at 2 ohms
- Product Highlights:
- mono subwoofer amplifier
- 300 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms)
- Class D amplifier design
- MOSFET switching power supply
- frequency response: 10 Hz - 150 Hz
- variable low-pass filter (50-200 Hz, 12 dB/octave)
- variable bass boost (0-12 dB at 45 Hz)
- optional wired remote level control
- preamp inputs and outputs
- speaker-level inputs
- 4-gauge power and ground leads and a 50-amp fuse recommended — wiring and hardware not included with amplifier
- no onboard fuses — when installing multiple amps in a system, an additional 50-amp in-line fuse between the distribution block and the amplifier is recommended
- 7-7/8"W x 2-1/8"H x 7-11/16"D
CP210-W0V3 Slot-Ported Enclosure with two 10" W0v3 Subwoofers
- Product Highlights:
- slot-ported enclosure with two 10" W0v3 subwoofers
- 5/8" medium density fiberboard construction covered with dark gray carpet
- 2-ohm impedance
- power handling: 150-600 watts RMS (1200 watts peak power)
- frequency response: 25-250 Hz
- sensitivity: 84 dB
- 29-5/8"W x 13-7/8"H x 17-1/2"D1 x 14"D2
- UPC: 699440994002
- Weight: 61
- Authorized Internet Dealer
Warranty: 1 Year Manufacturer warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for repair within 1 year from the original date of purchase with proper return authorization.