Hifonics 35th Anniversary SUPER AMPLIFIER. 4x150 Super A/B Class™ four channel car audio amplifier. Features on board ParaQ bass equalization and bass remote with diagnostic control.
CONSUMER TECHNOLOGY ASSOCIATION
CTA stands for Consumer Technology Association and Hifonics has been a member for decades. In 2016 the program previously known as CEA Certification changed to CTA-2006B to reflect the changes to the organization and their initiatives.
Specifically for the Hifonics Super Amps, the Primary Output Power should, according to CTA2006, be measured with 14.4V DC supply, a 4-ohm load and with 1% or less total harmonic distortion in the output. For more information go to the Consumer Electronics Association website
- Maximum Power : 2400 Watts
- Low Frequency Response : 20 Hz
- High Frequency Response : 20000 Hz
- Number of Channels : 4
- Frequency Response : 20-20000 Hz
- Built In Crossovers : Yes
- Channel Separation : Yes
- RMS Power Range : 600 Watts
- Amplifier Class : A/B
- PRE-AMP CIRCUITRY: Low Noise PreAmplifier
Low voltage signal from the source unit comes into the amplifier pre-amplifier circuit with minimal distortion
- INPUTS: Tiffany Style RCA Connectors
Audiophile signal quality and maximum signal throughput with minimum distortion and maximum external noise rejection
- HI LEVEL INPUTS:
N/A
- OPERATION MODE: Four Channel, Full Range, Bridgeable
Flexible installation allows this amplifier to run in four channel or bridged mono mode
- CROSSOVER / SIGNAL SHAPING: Accu-Cross & XCurve (X1/X10)
Accu-Cross crossovers allow for complete control of the signal directing to all speakers. XCurve allows for chosen frequencies to be as stated (X1) or multiplied by 10.
- EQUALIZER: ParaQ
Parametric Bass EQ with adjustments:
Boost (0-10dB)
Width (Narrow-Wide (On Center)
Center Frequency (30Hz - 100Hz)
- CLASS / TOPOLOGY: Super A/B Class™
Developed over three decades of engineering to deliver the highest level of sound quality and power efficiency. At very high listening levels. Hifonics Super A/B Class results in lower distortion, higher current efficiencies and less heat than conventional amplifier designs.
- OUTPUT DEVICES TECHNOLOGY: Ultra-Fi™ MOSFET
The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion
- HEAT SINK: Aluminum
Heavy duty aluminum alloy heat-sink efficiently moves heat from the MOSFET where it can be cooled without the need for fans
- POWER SUPPLY: Twin turbo
The Twin Turbo Coil PS is a Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
- STRAPPING:
N/A
- BASS REMOTE: Diagnostic Bass Remote Included
The Hifonics SUPER AMPS include a specialized Bass Remote that allows remote adjustment of the gain for the ParaQ bass equalization feature. Also critical is the Diagnostic ability of viewing the amplifier status on the L.E.D's of the remote
- REMOTE STATUS: Visualize Amplifier Signal
The remote also includes a clip indicator on the remote that mirrors what is visible on the amplifier end panel. This allows the user to see the output status of the amplifiers signal. There is one multi-color L.E.D that will show Green, Amber or Red. Green = Amplifier outputting clean signal. Amber = Amplifier outputting a "soft" clip signal which is a non-audible distortion only measurable on an oscilloscope. Red = Amplifier is putting out a "hard" clip signal. This is audible distortion and can damage speakers.
- OUTPUT CONNECTIONS: Nickel-Plated
High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
- CONNECTIONS TYPE: Molded & Angled
Hardened composite mounting with secure connection for all Power, Ground and Speaker connections. Angled for ease of access during installation.
- SIGNAL PASS THROUGH: Yes
One pair of Tiffany style connectors for a full range, L & R output allow distortion free signal to be passed through this amplifier to feed that signal to other components without the need for noise generating Y cables
- DIAGNOSTICS: Three-stage protection circuits
Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
- MARINIZED / WATERPROOF:
N/A
- ILLUMINATION: Yes
Hifonics logo and both the input and output side of the amplifiers connections
- UPC: 806576225157
- Weight: 17
- Authorized Internet Dealer
Warranty: 1 Year Manufacturer warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 year from the original date of purchase with proper return authorization.