CALL US: 1-310-526-8635
Hifonics :: BE35-4000.1D :: $629.99

Hifonics BE35-4000.1D

Item# 48786

35th Anniversary 4000 Watt Brutus Elite Mono Subwoofer Car Amplifier

Sorry, this product is no longer available.

  • CLASS
    Super D-Class™
  • VARIABLE VOLTAGE
    0.2V - 9V
  • SIGNAL TO NOISE
    >95dB
  • FREQUENCY RESPONSE
    10Hz-50KHz
  • CROSSOVER TYPE
    Variable Electronic
  • HIGH PASS CROSSOVER: 12DB PER OCTAVE
    N/A
  • LOW PASS CROSSOVER: 12DB PER OCTAVE
    30Hz-250Hz
  • CROSSOVER FREQUENCY RANGE: CH1 & CH2
    N/A
  • CROSSOVER FREQUENCY RANGE: CH3 & CH4
    N/A
  • CROSSOVER FREQUENCY RANGE: CH 5
    N/A
  • TONE CONTROL
    ParaQ Bass EQ
  • BASS BOOST
    0~10dB: Variable Center Frequency and Width with ParaQ
  • SUBSONIC FILTER
    15Hz-35Hz
  • PHASE SHIFT
    0-180 Degrees
  • POWER @ 1-OHM
    1 x 4000
  • POWER @ 2-OHMS
    1 x 2000
  • POWER @ 4-OHMS
    1 x 1000
  • MONO BRIDGED @ 2-OHMS
    N/A
  • MONO BRIDGED @ 4-OHMS
    N/A
  • TOTAL CHANNELS
    1
  • AUDIO INPUTS
    Yes
  • AUDIO OUTPUTS
    Yes
  • POWER TERMINAL: 12V/GND
    Oga
  • SPEAKER TERMINAL: WIRE GAUGE
    12g
  • FUSING
    External
  • CERTIFICATIONS
    N/A
  • WEIGHT
    17lbs (7.7kg)
  • DIMENSIONS ((L X W X H))
    22.8 x 8.75 x 2.5" (57.9 x 22.2 x 6.3cm)

Features & Benefits

 

  • PRE-AMP CIRCUITRY: Low Noise PreAmplifier
    Low voltage signal from the source unit comes into the amplifier pre-amplifier circuit with minimal distortion
  • INPUTS 1: Tiffany Style RCA Connectors
    Audiophile signal quality and maximum signal throughput with minimum distortion and maximum external noise rejection
  • INPUTS 2: Balanced Input
    Unused on this amplifier
  • OPERATION MODE: One Channel (Mono)
    Purpose built 1 channel amplifier for driving subwoofers and subwoofer systems
  • CROSSOVER / SIGNAL SHAPING: Accu-Cross
    Accu-Cross crossovers allow for complete control of the signal directing to all speakers. See specifications section for specific frequencies
  • EQUALIZER: ParaQ Bass Contouring
    Parametric Bass EQ with adjustments:
    Boost (0-10dB)
    Width (Narrow-Wide (On Center)
    Center Frequency (30Hz - 100Hz)
  • CLASS / TOPOLOGY: Super D-Class™
    Super D-Class™ designs which employ high-speed microprocessors with proprietary D/A conversion algorithms to efficiently control the current consumption. At very high listening levels, Hifonics amplifiers with Super D-Class circuitry result in lower distortion, higher current efficiencies and less heat than conventional D-Class amplifier designs.
  • OUTPUT DEVICES TECHNOLOGY: Ultra-Fi™ MOSFET
    The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion
  • HEAT SINK: Aluminum
    Heavy duty aluminum alloy heat-sink efficiently moves heat from the MOSFET where it can be cooled
  • POWER SUPPLY: T3 Power Supply
    Hifonics T3 (Twin Turbo Toroids) power supply keeps voltage constant through the Ultra-Fi output devices
  • STRAPPING: Yes
    Power Strapping allows the installer to Sync the input signal and output power to double rated output of a mono amplifier to drive a single or group of subwoofers.
    Driving subwoofers with this method doubles the available power to the overall bass system, while insuring each subwoofer receives the exact same power level.
    CONSULT PROFESSIONAL INSTALLER.
  • BASS REMOTE: Diagnostic, Illuminated Bass Remote Included
    Wired Bass Remote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle.
    Three-stage protection circuits:
    Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
    Smooth potentiometer and ringed illumination in a satin black mount create a custom look
  • SPEAKER OUTPUT CONNECTIONS: Nickel-Plated Brass
    High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
  • CONNECTIONS TYPE: Illuminated, Molded and Angled
    Secure connection for all Power, Ground and Speaker connections. Illuminated and angled for ease of access during installation.
  • SIGNAL PASS THROUGH: Yes
    One pair of Tiffany style connectors for a full range, L & R output allow distortion free signal to be passed through this amplifier to feed that signal to other components without the need for noise generating Y cables
  • DIAGNOSTICS: 4-Way System Protection Circuitry
    Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
  • ILLUMINATION: Illuminated Logo
    The Hifonics logo illuminates when the amplifier is powered, making a #PowerFromTheGods statement in the dark
  • UPC: 806576227113
  • Weight: 17
  • Authorized Internet Dealer
*Warranty: 1 Year Manufacturer warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 30 days from the original date of purchase with proper return authorization. After the 30 day time period, products must be returned to their original manufacturer for the remainder of the manufacturer's warranty period.