Infinity Kappa 1000W Kappa Series 10” Single Voice Coil 2 Ohms or 4 Ohms Switch Selectable Subwoofer
We are an authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • One 10" Woofer
- • Screw cover ring (installed)
- • Self-adhesive foam gasket
- •Owner's manual
- •Installation instructions
SSI™ (Selectable Smart Impedance)
The Infinity Kappa 1000W is a 10-inch subwoofer designed to deliver high-quality, deep bass for car audio systems. It is part of the Kappa series, which is known for its advanced features and exceptional sound quality. The Kappa 1000W features a rigid and lightweight woofer cone made from a material called Plus One+, which allows for maximum cone area and accurate bass reproduction. It also has a dual voice coil that allows for flexibility in wiring options and power handling up to 1,800 Watts of peak power.
Aero-cooled voice coil
The subwoofer's motor structure is designed with Infinity's patented Selectable Smart Impedance technology, which allows users to adjust the sub's impedance depending on their amplifier's capabilities. This technology makes the subwoofer more efficient, reducing distortion and increasing power handling.
Acoustically damped glass-fiber cone
In terms of sound quality, the Kappa 1000W delivers powerful and deep bass that is well-suited for all types of music genres. It has a frequency response range of 25 Hz to 400 Hz, ensuring that all low frequencies are accurately covered. The subwoofer's sensitivity rating of 90 dB means that it can produce a significant amount of bass even with lower power input.
Premium screw-down terminals
The Kappa 1000W has a sleek and modern design that can complement any car audio system. It is built with high-quality materials that are designed to be durable and long-lasting. The subwoofer's installation is easy with its dual voice coil and flexible wiring options, making it suitable for novice and experienced car audio enthusiasts. Overall, the Infinity Kappa 1000W is an excellent choice for anyone upgrading their car audio system with a powerful, high-quality subwoofer. Its advanced features, exceptional sound quality, and sleek design make it popular among music enthusiasts and audiophiles.
- Diameter : 10 Inch
- Sensitivity : 90 dB
- Impedance : 2/4 Ohm
- Frequency Response : 30-175 Hz
- Peak Power Handling : 1800 Watts
- Top Mount Depth : 6-1/4 Inches
- Shallow Mount : No
- Number of Voice Coils : Single
- Suggested Sealed Box Volume : 0.6 Cubic ft.
- Suggested Ported Box Volume : 1.5 Cubic ft.
- RMS Power Handling : 450 Watts
Features:
- Selectable Smart Impedance (SSI): A switch on the input terminal allows you to easily change the woofer's impedance between 2Ω and 4Ω settings. (The connected amplifier should be off when changing the impedance.) The power handling is the same for either setting; 450 watts RMS/1800 watts peak.
- Woven Glass-Fiber Cone: The cone material is extremely stiff, minimizing cone flex; this results in very low distortion and improved clarity.
- Vented Polepiece: Venting the polepiece reduces air compression under the dustcap which minimizes mechanical noise and provides more constant mechanical Q for reduced distortion.
- Terminal: The spring terminals will accept bare wire up to 8 gauge.
- Sealed Box: Infinity recommends a sealed enclosure with an internal volume of 0.6 ft³.
- Ported Box: Infinity recommends a ported enclosure with an internal volume of 1.5 ft³ with one 3" diameter x 10" long port, resulting in a tuning frequency of 32 Hz. They also recommend using a sub-sonic filter.
- Free-air Mounting: In addition to being compatible with sealed and ported enclosures, the woofer can be used in free-air applications. A free-air subwoofer is designed to be mounted on a baffle board, which separates the front of the speaker from the back. For instance, you could mount this woofer to a board attached to the rear deck or placed in the trunk against the rear seat. The trunk acts as the enclosure housing the subwoofer. Because there is no specific volume of air to stiffen the suspension, the free-air power handling is approximately half that of the woofer in a box, in this case 225 watts RMS.
Specifications
- 10" Selectable Smart Impedance (SSI™) Kappa Series Subwoofer - Choose between 2 or 4 ohm impedance at the flip of a switch
- Peak: 1800 watts
- RMS: 450 watts
- Recommended power range: 200 - 450W RMS
- Proprietary aero-cooling design keeps the voice coil cool
- Acoustically damped glass-fiber cone
- Premium screw down terminals - Accommodates up to 8 gauge wire
- Aero-cooled voice coil - Two-sided, ducted airflow design / Increases power handling and improves reliability
- Voice Coil Diameter: 2"
- Top-mount depth: 6-3/16"
- Cutout diameter: 9-1/16"
- Frequency Response: 30 - 175 Hz
- Sensitivity: 90 dB
- UPC: 050667371326
- Weight: 16.01
- Authorized Internet Dealer
Warranty: 1 Year Onlinecarstereo.com warranty.
1 Year warranty from Onlinecarstereo.com implies that repairs must be returned to Onlinecarstereo.com, not the manufacturer. More information can be found in our help section under returns & warranties.
What's not covered : Misuse, abuse, defacement, physical damage of any kind, and improper installation / operation. Video and multimedia equipment with damaged or cracked screens.Subwoofers and speakers are not warrantied if the defect is due to physical damage.
Do you own this product?
Write a review!
-
This sub is well-built and kicks out fantastic lows for a 10-inch. Paired it with a 500-watt mono amp, and it's packing serious power.
