JBL STADIUM 1000 AM Stadium Series 1000W x 1 RMS @2Ohms, 2600W Max Power Class D Mono High Performance Car Amplifier
We are a JBL authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • Mono amplifier
- • (6) 35A ATO fuses (3 installed)
- • (2) Bare wire-to-RCA adapters
- • (3) Flat-head screws (Length 1/2")
- • (4) Mounting screws (Length 2-3/16")
- • 1/0-gauge power/ground wire adapter
- • 16.5' Remote cable (RJ25 plugs on both ends)
- • EARL ground terminal (for 1/0-gauge wire)
- • Heat shrink tube (Length 1-9/16")
- • Remote bass controller
- • Owner's Manual
Class D Design
Every Stadium amplifier, including the full-range models, features high-efficiency Class D topology. This technology allows JBL to engineer amplifiers that are more compact, generate less heat, and draw less current from the vehicle’s electrical system.
Low Distortion
JBL Stadium amplifiers have been engineered to deliver the lowest distortion possible, enhancing the audio experience regardless of output level.
Full On-Board Protection
JBL Stadium amplifiers have on-board circuitry to protect from shorts, temperature, overvoltage and undervoltage. An LED indicator is included on all five models to let the user know when one of these conditions exists.
Proprietary High-Conductivity Terminals
All JBL Stadium amplifiers come equipped with newly introduced E.A.R.L terminal for better grounding. Adapter connector is available in the box for easy installation.
Compact footprint
With it becoming more and more difficult to find spacious locations for amplifier mounting, JBL Stadium amplifiers have been developed in a small compact form factor to allow more location versatility.
Sleek design
Sometimes, an amp can be as stylish as it is powerful. JBL Stadium amplifiers have a clean, streamlined industrial design.
Full-Range Line Outputs
The mono amplifier comes with a remote bass control. This allows for increasing or decreasing bass independent of the head units tone controls. The benefit is total control over just the bass output. The tuning is right at the driver’s finger tips.
- Maximum Power : 2600 Watts
- Low Frequency Response : 32-320 Hz
- Number of Channels : 1
- Frequency Response : 10-320 Hz
- Built In Crossovers : Yes
- RMS Power Output : 1000x1 Watts
- Channel Separation : No
- Amplifier Class : D
- Fuse Rating : 105 A
Specifications:
- Operating voltage 9–16 volts
- RMS power @ 4 ohms 700W
- RMS power @ 2 ohms 1000W
- Total peak power 2600W
- Frequency response 10Hz – 320Hz @ -3dB
- Crossover filter LPF 32Hz – 320Hz
Variable 12dB/Oct
- Bass EQ 70Hz Fix 0-9dB
- THD + N at rated power ≤0.1%
- High input maximum signal level 20V
- High input maximum sensitivity 2V
- Line input maximum signal level 2V
- Line input maximum sensitivity 0.2V
- Line-in signal-to-noise ratio (reference to 1 watt) ≥80dB
- Quiescent current draw ≤2A Fuse size 3 x 35A
- Dimensions (H x W x D) 54.20 x 179.60 x 335.30mm
- UPC: 050036356138
- Weight: 10
- Authorized Internet Dealer
Warranty: 1 Year Onlinecarstereo.com warranty.
1 Year warranty from Onlinecarstereo.com implies that repairs must be returned to Onlinecarstereo.com, not the manufacturer. More information can be found in our help section under returns & warranties.
What's not covered : Misuse, abuse, defacement, physical damage of any kind, and improper installation / operation. Video and multimedia equipment with damaged or cracked screens.Subwoofers and speakers are not warrantied if the defect is due to physical damage.
