Dual DCPA701
Connected Car
With support for both Apple CarPlay™ and Android Auto™ you can control key phone features directly from the receiver’s touchscreen or via voice-control — significantly reducing driver distraction. Both Apple CarPlay and Android Auto launch upon connecting a compatible phone to the receiver via USB.
60 Watts of peak power built-in for each of your 4 speakers. Tailor your EQ curve to match your listening preferences. Choose from Pop, Rock, Jazz, Electric, Classic, Beat and Flat, or dial in and save your own custom setting. Use the 3 pair of preamp outputs to add amplifiers for more volume in your system.
Kicker 44TCWC104
CompC Series 10" 600 Watts Max Power 4-Ohm Car Subwoofer in Thin Profile Enclosure
Whether it’s a thin-mount, single or dual-subwoofer design, CompC™ Loaded Enclosures are factory-tuned with a front-facing port to bring you loud, great-sounding bass.
CompC subwoofers are the beating heart of every enclosure. You get a lightweight, injection-molded polypropylene cone and tough, ribbed polyurethane surround built to eliminate flex and distortion.
The right port makes all the difference. Designed to optimize the CompC subwoofer box performance precisely, these enclosure give you the "kick" you've been looking for!
JL Audio C1-650x
6-1/2", 225 Watts Peak Power, Coaxial Car Speaker System
C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-650x is a proprietary, stamped, steel 6.50-inch (165 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil's motion. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
JL Audio C1-650
6-1/2", 225 Watts Peak Power, 2-Way Car Component Speaker System
To facilitate fit, multi-application adaptor rings are included for the C1-650 woofers, allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the woofers will also fit into many "6-inch" speaker locations as well. Surface and flush mounts are included with C1 tweeters for maximum installation versatility.
Metra 40-CR10
Factory Antenna to Aftermarket Radio Adapter for Chrysler/Dodge/Ford/GM 2006/Jeep 2002-Up
Adapts aftermarket radio to factory antenna connection
Axxess XSVI-2105-NAV
Non - amplified, non - onstar interface harness that retains accessory power and provides navigation output wires.
The XSVI series interface is an inexpensive solution that provides +12-volt accessory power output for select vehicles that data control signals instead of conventional power signals. If the vehicle is equipped with retained accessory power features, the XSVI will keep those features.
Axxess AXSWC
Universal Steering Wheel Control Interface, Works with Many Popular Aftermarket Receivers - NEW MODEL that replaced the ASWC-1
Features:
- One Interface does it all – No additional interfaces needed
- Designed to be compatible with all major radio brands
- Auto detects (1) vehicle type, radio connection, and presets controls
- Ability to dual assign steering wheel control buttons
- Can be manually programmed for most vehicles
- Retains settings even after battery disconnection or interface removal
- All connections done at the radio location
- Micro “B” USB updatable
Metra 95-3305
GM Multi-Kit 2006-Up
Metras Install kits are manufactured from OEM quality ABS plastic designed to leave no gaps between the dash and the kit.
Features:
Features:
Wiring and Antenna Connections (sold separately)
- Harness
- see Vehicle Application Guide
- Antenna Adapter
- Vehicle Application Guide
XS Power AKXP4-1
Amp Kit, XP Flex 4 AWG, Power Cable, Speaker Cable, Signal and Remote
This kit is designed to help you correctly and safely install your new XS Power or other aftermarket Powercell. The kit was designed with the installer in mind, and can be completed with very few tools and requires no wire crimping if the directions are followed correctly. Please see the steps below that will help to facilitate a fast, safe and easy installation of your new battery and cables.
BP600.1
600 Watts Max Power Full Range Mono Car Amplifier with built-in Auto Sensing Turn-on Function
The BLADE BP Series Amplifiers are designed with our “Live, Loud and Play Hard” motto. All amplifiers have built-in OEM line converters with RCA inputs that can take a high level speaker signal at up to 9 Volts directly in. By sensing the DC off set of a factory radio it can activate the ATO (Auto Turn On) feature and convert the 12V turn on into a 12V switched out. Blade “BP” are Class AB designed with a minimum per channel impedance operation of 2 Ohm with the exception of the BP2000.1, BP1200.1 which are Class “D” and can play down to 1 Ohm minimum. The monster BP4000 & BP6000 are full range Digital and 2 OHM stable. All Blade “BP” amps use Mil Spec PCBs, SMD parts, 5 way protection, full MOSFET high grade switching devices and all comply with the “World Wide Standards”, “ROHS”, “E-Mark” and are CTA2006 Compliant. This ensures that no competition can stand up to the BLADE BP when it comes to features, performance and value.
What's Included?
- Dual DCPA701
- JL Audio C1-650
- JL Audio C1-650x
- Kicker 44TCWC104
- Massive Audio BP600.1
- XS Power AKXP4-1
- Metra 95-3305
- Metra 40-CR10
- Axxess AXRC-GMLN1
- Axxess AXSWC
DCPA701 7" LCD Digital Media Receiver with Bluetooth, Apple CarPlay, & Android Auto
Features:
- Digital Media Receiver with Apple CarPlay™ and Android Auto
- 7-inch Full-Color Capacitive Touchscreen
- Digital LED Backlit TFT Display
- Screen Resolution: 800 x 480
- Power Output:
- Peak: 60 watts x 4 channels
- Works with Apple CarPlay®
- Works with Android Auto™ and the Google Assistant
- AM/FM tuner with 18FM/12AM presets
- Authorized Internet Dealer
- Use with Apple CarPlay or Android Auto
Playback and Audio Features:
- Mechless Digital Media Receiver: No CD mechanism means you have less to carry. Stream your music digitally!
- FLAC/MP3/WMA/AAC/HE-AAC music playback via USB
- 10-band EQ
- 7 EQ Presets
- Rear USB Input
- CEA-2006 compliant amplifier
Bluetooth Features:
- Built-in Bluetooth technology for hands-free talking and audio streaming
- Bluetooth Profiles Supported:
- HFP: Hands Free Profile allows a hands-free car kit to connect to a compatible mobile phone
- PBAP: Phone Book Access Profile allows the car stereo to display the name of the incoming caller, as well as access the contact list of the mobile phone directly from the car stereo
- A2DP: Advanced Audio Distribution Profile allows high quality audio to be streamed from an audio device to the car stereo
- AVRCP: Audio/Video Remote Control Profile supports basic remote control functions (play, pause, etc) via Bluetooth
- Works with most Bluetooth enabled cell phones
Front - C1-650 6-1/2", 225 Watts Peak Power, 2-Way Car Component Speaker System
Specifications:
- Continuous Power Handling (RMS) 50 W
- Peak Music Power 225 W
- Recommended Amplifier Power (RMS) 10 - 75 W / Ch.
- System Efficiency 91.0 dB @ 1 W / 1 m
- System Nominal Impedance 4 Ω
- System Frequency Response 59 Hz - 22 KHz ± 3 dB
Rear - C1-650x 6-1/2", 225 Watts Peak Power, Coaxial Car Speaker System
Specifications:
- Continuous Power Handling (RMS) 50 W
- Peak Music Power 225 W
- Recommended Amplifier Power (RMS) 10 - 75 W / Ch.
- System Efficiency 90.5 dB @ 1 W / 1 m
- System Nominal Impedance 4 Ω
- System Frequency Response 48 Hz - 24 KHz ± 3 dB
44TCWC104 CompC Series 10" 600 Watts Max Power 4-Ohm Car Subwoofer in Thin Profile Enclosure
- Subwoofer (in, cm): 10, 25
- Impedance (Ohms): 4
- Power Watts (peak/RMS): 600/300
- Sensitivity (dB 1w/1m): 93.8
- BOX TOP DEPTH (in, cm): 4,10.2
- BOX BOTTOM DEPTH (in, cm): 7-5/8, 19.4
- BOX HEIGHT (in, cm): 15, 38.1
- BOX WIDTH (in, cm): 21-1/2, 54.6
BP600.1 600 Watts Max Power Full Range Mono Car Amplifier with built-in Auto Sensing Turn-on Function
Features:
- Built-In OEM Line Converter
- 2 Ohm Stable Design
- Class A/B
- Mil Spec PCB with SMD parts
- Built-in Noise Reduction Circuitry
- Full MOSFET with High Grade Switching Devices
- Built-In Auto Sensing Turn On Function (Hi-Inputs)
- 12V Remote Output for External Devices (Hi-Level Inputs)
- 0dB ~ 12dBBass Boost
- Next Generation Advanced 5 Way Protection Circuitry
- World Wide Standards Compliant (RoHS, E-Mark, CTA-2006, CE)
- Peak Output Power @ 14.4V 600W x 1
- 1 Ohm RMS n/a
- 2 Ohm RMS 300W x 1
- 4 Ohm RMS 150W x 1
- 4 Ohm Bridged N/A
- Input Level 0.2~9.0v
- Freq. Response 15Hz~30KHz
- THD at 4 Ohm Load 30% Rated Power <0.1%
- S/N Ratio >90dB
- BassBoost 0~6dB/12dB (45Hz)
- Minimum Load 2 Ohm Mono
- Gain Remote UR1 (Optional)
- Dimension 2"H x 7.1"W x 11"L
95-3305 GM Multi-Kit 2006-Up
Features:
Wiring and Antenna Connections (sold separately)
- Harness
- see Vehicle Application Guide
- Antenna Adapter
- Vehicle Application Guide
Vehicle Applications:
- Chevrolet
- Avalanche 2007-2013
- Equinox 2007-09
- Express Van 2008-Up
- Impala 2006-2013
- Impala Limited (Fleet) 2014
- Monte Carlo 2006-07
- Tahoe 2007-2014
- Silverado 2007-2013(Excluding Classic Models)
- Silverado 2500/3500 2014
- Suburban 2007-2014
- Tahoe 2007-2014
- Traverse 2009-2012
- Captiva Sport 2012-Up
- Buick
- Enclave 2008-2012
- Lucerne 2006-2011
- GMC
- Acadia 2007-2012
- Savanna 2008-Up
- Sierra 2007-2013 (Excluding Classic Models)
- Sierra 2500/3500 2014
- Yukon 2007-2014
- Saturn
- Outlook 2007-2010
- Vue 2008-2010
- Suzuki
- Hummer
- Pontiac
AKXP4-1 Amp Kit, XP Flex 4 AWG, Power Cable, Speaker Cable, Signal and Remote
Specifications:
- Weight Lbs. – 3.25
- Weight Kgs. – 1.47
- Length – 9.75 in
- Height – 11 in
- Width – 2.5 in
Kit Contents:
- 1qty - 17ft 4AWG XPFLEX BL Cable
- 1qty - 3ft 4AWG XPFLEX BK Ground Cable
- 1qty - 17ft 18G BL Remote Cable
- 1qty - 17ft 16G Clear Speaker Wire
- 1qty - 17ft High Grade Twisted Pair RCA Cables
- 1qty - Mini ANL Fuse Holder
- 1qty - 60A ANL Fuse
- 2qty - Plaite Braid Tube in BK
- 2qty - 4AWG Ring Terminal/Seamless/BL
- 2qty - 4AWG Spade Terminal/BK
- 2qty - 16G Spade Terminals/BK
- 3qty - 16G Spade Terminals/BL
- 1qty - 1/2" Firewall Grommet
- 10qty - 6" Zip Ties
XSVI-2105-NAV GM 2006-UP LAN 29 Accessory and NAV Output Interface
-
- Provides accessory (12 volt 10 amp).
- Retains R.A.P. (retained accessory power) if equipped.
- Provides navigation outputs (reverse/parking brake/vehicle speed sense).
- Used in non amplified systems or when removing amplified system.
- USB Updatable and in new case.
40-CR10 Factory Antenna to Aftermarket Radio Adapter for Chrysler/Dodge/Ford/GM 2006/Jeep 2002-Up
- Chrysler factory antenna adapter
- Snap-lock to aftermarket radio
AXSWC Universal Steering Wheel Control Interface, Works with Many Popular Aftermarket Receivers - NEW MODEL that replaced the ASWC-1
Features:
- One Interface does it all – No additional interfaces needed
- Designed to be compatible with all major radio brands
- Auto detects (1) vehicle type, radio connection, and presets controls
- Ability to dual assign steering wheel control buttons
- Can be manually programmed for most vehicles
- Retains settings even after battery disconnection or interface removal
- All connections done at the radio location
- Micro “B” USB updatable
- UPC: 798418841918
- Weight: 50
- Authorized Internet Dealer
Warranty: 1 Year Manufacturer warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 year from the original date of purchase with proper return authorization.
