Hertz MLK 1650.3 Mille Series 6-1/2" 150W RMS (300W Peak Power Handling) 4-ohm Impedance 2-Way Component System
We are a Hertz authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- •Two ML 1650.3 Woofers
- •Two ML 280.3 Dome tweeters (with attached 10" length of speaker wire)
- •Two MLCX 2 TW.3 Crossover networks
- •2 Tweeter flush mount cups (installed)
- •2 Tweeter flush mount clamps
- •2 Tweeter grilles (installed)
- •2 Woofer grilles
- •Sixteen 1" Allen head screws (3mm)
- •16 Speed clips
- •Two M3 x 12mm Machine screws (2.5mm Allen head)
- •Two M3 x 8mm Machine screws (2.5mm Allen head/installed in tweeter housing)
- •3mm Allen head bit
- •2 Flat washers
- •Template on box
- •Owner's Manual
Two way kit dedicated to purists
The Hertz MLK 1650.3 Legend car audio speakers system is a two way kit dedicated to purists , aiming at achieving maximum timbre consistency combined with very high dynamics and extremely extended frequency response. Through a solidly built switch, the MLCX 2 TW.3 crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification.
Featuring a Two-position Selector
Besides, thanks to the Mid-Contour and Hi-Countor controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two “Countor” controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve thieir favourite sound.
- Diameter : 6.5 Inch
- Sensitivity : 92 dB
- Frequency Response : 40-25000 Hz
- Peak Power Handling : 300 Watts
- Woofer Composition : Pressed-pulp cone with cotton fibres
- Tweeter Composition : Tetolon
- RMS Power Handling : 150 Watts
Product Highlights:
ML 280.3 Legend
- Neodymium magnet optimized with FEA simulations of the magnetic flux for utmost control and fast response to the transients.
- Extremely pure copper short circuit ring, for excellent very high frequency extension.
- Die-cast aluminium face plate with profile optimized with FEA simulations to improve frequency response and dispersion.
- Tetolon Fiber dome optimized with FEA simulations for lower distortion and improved dispersion in high frequency range.
- Frame structure and rear load chamber both derived from a CNC machined solid aluminium block, to ensure mechanically inert response to resonances.
- Rear chamber sized for only 900 Hz Fs: low Fs ensures wide extension in low frequency range and low distortion also in the crossing section, allowing a decreased cut-off frequency.
- High-density damping material underneath the dome, low-density absorbing material in the rear chamber, providing fluid acoustic emission and high damping in the low frequency response.
ML 1650.3 Legend
- Neodymium magnet optimized with FEA simulations for real dynamics and utmost control.
- Very low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.
- Aluminium covered pole for a linear impedance modulation and low distortion.
- 36 mm CCAW double layer voice coil wound on a Polyamide former for exceptional power handling and compression-free re production even in the most demanding musical passages.
- Exponential V-cone® with optimized geometry for utmost linearity and dispersion at mid frequency range.
- “Boundary Free” IIR rubber surround, for better efficiency and wider mid-bass frequency.
- Pressed-pulp cone with cotton fibres, combining stiffness and lightweight, to achieve wide frequency response and limited break-ups at high frequency.
- Three-spoke, very acoustically transparent anti-resonant aluminium alloy basket featuring built-in venting holes.
- CNC machined elegant diamond-cut basket edge featuring the Hertz logo.
- Die-cast aluminium factory provided grille featuring diamond-cut aluminium Hertz logo.
MLCX 2 TW.3 Legend
- Bi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability.
- “Mid-Contour” two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listener’s favourite sound.
- “Hi-Contour” two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position/angle towards the listener.
- “Mid-Contour” in conjunction with “Hi-Contour” provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter.
- Three-position switch for tweeter level adjustments in 2 dB steps, to fine-tune the transducer’s emission.
- “Hi-Boost” control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener.
- Extremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies.
- Air wound inductors built on pure copper-wire with up to 1mm diameter, for high saturation threshold of the magnetic flux and low losses on the woofer section where high transient currents are demanded.
- High power rating Wirewound resistors, to ensure performance stability even at high operating temperature. The Wirewound build construction grants low parasitic series inductance thus reducing losses at high frequencies, especially for resistors in series to the tweeter
Specifications:
- Power Handling - Peak W: 300
- Power Handling - Continuous W: 150
- Impedance: 4 ohms
- Frequency response Hz: 40 ÷ 25k
- Sensitivity dB SPL: 92
- Voice coil Ø mm (in.): Woofer 36 (1.4) Tweeter 28 (1.1)
- Woofer size mm (in.): 165 (6.5)
- Tweeter size mm (in.): 28 (1)
- Woofer magnet: Neodymium
- Tweeter magnet: Neodymium
- Woofer cone: Pressed-pulp cone with cotton fibres
- Tweeter dome: Tetolon
- Crossover type: 2 Way Passive Crossover
- Crossover cut off: 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF)
Electro-acoustic Specifications:
- Diameter (D): 132 mm
- DC Resistance (Re): 3.3 Ohms
- Resonant Frequency (Fs): 65 Hz
- Voice Coil Inductance (Le): 0.24 mH
- Equivalent Volume of Compliance (Vas): 8.3 liters
- Moving Mass (Mms): 17.5 grams
- Mechanical Compliance of Suspension (Cms): 0.3 mm/N
- BL Product (BL): 7 T*m
- Total Q Factor (Qts): 0.47
- Electrical Q Factor (Qes): 0.52
- Mechanical Q Factor (Qms): 5.3
- Sound Pressure Level (SPL): 93 dB
- UPC: 8018823114004
- Weight: 10
- Authorized Internet Dealer
Warranty: 1 Year Manufacturer warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for repair within 1 year from the original date of purchase with proper return authorization.