facebook no script image

Rockford Fosgate  P16-S On Sale

Punch Series 6" 120 W Peak Power Handling at 4 Ohms, 2-Way Components Speaker System

Item #35166

Condition:   Brand New

Product Highlights

  • Punch Series
  • 6" Speaker System
  • 120 W Peak Power
  • 4 Ohms Impedance
  • 2-Way Components

  Free 2-Years Warranty Included!
60 DAYS Returns Accepted.
FREE Lifetime Tech Support.
FREE Shipping.
60 DAYS Price change protection.

$151.99

Discount Already Applied!
Reg. Price $212.50  Save $60.51
Add Extended Warranty
  Free 2-Years Warranty Included!
60 DAYS Returns Accepted.
FREE Lifetime Tech Support.
FREE Shipping.
60 DAYS Price change protection.

No Credit needed for acima logo. Learn More

Rockford Fosgate Authorized Dealer

Huge Saving on Other items:


Huge Saving on Other items:


Rockford Fosgate Banner

Rockford Fosgate P16-S Punch Series 6" 120 W Peak Power Handling at 4 Ohms, 2-Way Components Speaker System


We are a Rockford Fosgate authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!

What's Inside?
  • • (2) Woofers
  • • (2) Woofer grilles
  • • (2) Tweeters (6" speaker wire attached terminated with female quick-slide connectors)
  • • (2) Front flush mount brackets
  • • (2) Rear flush mount brackets
  • • (2) Angled surface mounting housings
  • • (2) Tweeter trim rings
  • • (2) M4x25mm Machine screws
  • • (2) M4x10mm Machine screws
  • • (2) M4x15mm Stud bolts
  • • (8) 1-1/4" Allen head screws
  • • (1) 3mm Allen head bit
  • • (8) Speed clips
  • • (2) 39" Lengths of tweeter speaker wire (each with male quick slides on one end and female quick slides on the other)
  • • (1) Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian)
  • • Owner's Manual

 


Why Choose Rockford Fosgate P16-S Component Car Subwoofer?


Rockford Fosgate P16-S Component Car Subwoofer Front View
Crisp Highs and Rich Midrange Detail

Delivering 60 Watts RMS (120W Max) across a smooth 60 Hz to 22 kHz frequency response, this 6-inch 2-way component setup brings crisp, detailed audio straight to your vehicle. Featuring a mineral-filled polypropylene cone supported by a durable butyl rubber surround and paired with a separate 1-inch PEI dome tweeter, it projects bright highs and rich midrange without distortion even when you turn the volume up.

Concealed Crossovers, Zero Cable Clutter

The P16-S features Rockford Fosgate’s innovative Integrated Concealed Crossover (ICC) built right into the midrange basket. This 12dB/octave crossover automatically routes the proper high-pass frequencies straight to your tweeter, keeping your installation super clean, fast, and completely hassle-free.

Rockford Fosgate P16-S Component Car Subwoofer Bottom View
Effortless OEM-Fit Installation

Thanks to the innovative FlexFit basket design, the slotted frame allows for subtle mounting adjustments to line up easily with factory bolt holes. Plus, with flush-mount tweeter housings sized for a standard 1-3/4" hole saw, included grilles, and mounting hardware, achieving a pro-grade finish in almost any vehicle is quick and painless.

 


Frequently Asked Questions (FAQ)


  • • Why isn't the system producing enough midbass?
    Check speaker polarity, mounting, door sealing, and wiring connections. Incorrect polarity or air leaks around the speaker can cause weak midbass and make the system sound thinner than expected.
  • • Why do the tweeters sound too bright or harsh?
    Excessive treble may result from equalizer settings, tweeter placement, or crossover configuration. Adjust the treble gradually and verify both tweeters are correctly wired and positioned.
  • • Why is one side louder than the other?
    Check the balance and fade controls first, then inspect speaker wiring and crossover connections. Loose connections or reversed polarity can create noticeable differences between the left and right channels.
  • • Can I run these speakers from a factory radio?
    Yes, they can work with many factory head units. However, an aftermarket amplifier can provide cleaner power, improve dynamics, and allow the speakers to reach higher volume levels.
  • • Why does the sound distort when I increase the volume?
    Distortion can occur when the factory radio or amplifier clips. Lower the volume slightly, check gain settings, and make sure the speakers receive clean power within their recommended operating range.
  • • Why isn't one of the tweeters producing sound?
    Inspect the tweeter wiring and crossover connections for loose or damaged wires. Incorrect connections or a faulty crossover can prevent the tweeter from receiving the appropriate high-frequency signal.
  • • Why do I hear rattling from the door after installation?
    Check the speaker mounting hardware, door panel, and surrounding trim. Loose components or insufficient mounting can vibrate with the speaker and create rattling during louder music.
  • • Do I need an amplifier to get good performance?
    An amplifier is not always necessary, but clean additional power can improve volume and dynamics. Match the amplifier appropriately and set the gain correctly to avoid clipping or damage.
  • • Why does the upgrade sound weaker than the factory speakers?
    Verify speaker polarity, crossover wiring, mounting depth, and door sealing. Incorrect phase or poor mounting can reduce midbass and make an aftermarket installation sound unexpectedly weak.
  • • Where should the tweeters be mounted?
    Factory locations, A-pillars, or upper door positions can work well. Aim both tweeters toward the listening area and keep their placement reasonably symmetrical for better imaging.

SPECIFICATIONS


  • Diameter : 6 Inch
  • Sensitivity : 87.2 dB
  • Frequency Response : 60-22000 Hz
  • Peak Power Handling : 120 Watts
  • Design : 2 Way
  • Woofer Composition : Injection Molded Polypropylene
  • RMS Power Handling : 60 Watts

FEATURES


Features:

  • FlexFit basket design
  • ICC (Integrated Concealed Crossover)
  • PEI dome tweeter
  • Recessed tweeter mount uses standard 1-3/4" hole saw
  • Butyl rubber surround
  • Mineral-filled & polypropylene injection molded cone

 

Specifications:

  • Configuration: Component System
  • Midrange Diameter (in): 6"
  • Midrange Depth (in): 1.93" (49mm)
  • Tweeter Diameter (in): 1.0" (25.4mm)
  • Tweeter Depth (in): 0.50" (13mm)
  • Frequency Response: 60Hz - 22kHz
  • Nominal Impedance: 4-Ohm
  • Power Handling (RMS):  
    • 60 Watts RMS 
    • 120 Watts MAX
  • Crossover:  
    • Tweeter crossover built into midrange basket 
    • 12dB/octave
  • Sensitivity (dB @ 1 watt/1 meter): 87.2
  • Grilles Included: Yes
  • Mounting Hardware: Yes
  • UPC: 780687341084
  • Weight: 5.8
  • Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.

Do you own this product?

Write a review!
  • This component system has great value for what it offers. Exceptional sound quality, and got no fatigue with tweeters. Easy install too on my RAM

    Remy
    2/20/2024
free installation

Must haves for Rockford Fosgate P16-S:

Other items that might interest you: