The Crunch POWER DRIVE 4-Channel Pro Power Class AB Bridgeable Amp (2,000 Watts max) is unlike any Crunch amplifier. The first thing you'll notice is the size. This amp is big. It's big on purpose because we incorporate QTD (Quick Thermal Dispersion) technology, which means the amp has more aluminum that the normal amplifier. This Pro Power model features built-in electronic crossovers and high-level inputs.
Crunch is considered a common name among car audio gearheads. Their products are manufactured to high end specifications to provide excellent sound experience. Onlinecarstereo has been a long time partner of Crunch so you can be sure you get authentic products with warranties stright from the warehouse.
- Maximum Power : 2000 Watts
- Number of Channels : 4
- Built In Crossovers : Yes
- Channel Separation : Yes
- RMS Power Range : 500 Watts
- Amplifier Class : A/B
Specifications
- CLASS
Class A/B
- VARIABLE VOLTAGE
.2 to 5V
- SIGNAL TO NOISE
N/A
- FREQUENCY RESPONSE
20Hz - 20KHz
- CROSSOVER TYPE
Variable Electronic 12dB Per Octave
- LOW PASS CROSSOVER:
12DB PER OCTAVE:
50Hz-250Hz
- CROSSOVER FREQUENCY RANGE
CH1 & CH2
60Hz-1200Hz
- CROSSOVER FREQUENCY RANGE
CH3 & CH4
30Hz-250Hz
- TONE CONTROL
Built-in bass control
- BASS BOOST
0 ~ 9dB
- SUBSONIC FILTER
N/A
- POWER OUTPUT @ 1 OHM:
N/A
- POWER OUTPUT @ 2 OHMS:
4 x 500W
- POWER OUTPUT @ 4 OHMS
4 x 250W
- MONO BRIDGED @ 4-OHMS
2 x 1000W
- TOTAL CHANNELS
4
- AUDIO INPUTS:
Unbalanced Inputs (RCA)
- AUDIO OUTPUTS:
Line Output (RCA)
- POWER TERMINAL:
12V/GND
8 ga
- SPEAKER TERMINAL WIRE GAUGE
12 ga
- FUSING
30A x 2
- DIMENSIONS
17.8 x 11.5 x 3.8 in
45.2 x 29.2 x 9.6 cm
- WEIGHT
8.15 lbs (3.6 kg)
Features & Benefits
- PRE-AMP CIRCUITRY Low Noise PreAmplifier
Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process
- INPUTS Low voltage RCA Inputs
Highest sound quality connection with quality RCA materials helps prevent interference and minimize distortion in the signal path
- HIGH LEVEL INPUTS Yes
Easily tie into OEM audio systems that do not offer RCA output to maximize after market amplifier power
- OPERATION MODE 4
Four Channel Stereo, Dual Stereo Bridged, Stereo + Bridged Mono, Dual Bridged Mono
- CROSSOVER / SIGNAL SHAPING Versa-Cross Electronic Crossover
Fully Adjustable 12dB Crossovers
- EQUALIZER Electronic
Fully Adjustable 12dB Crossovers
- CLASS / TOPOLOGY Class A/B
High sound quality circuit that allows POWER DRIVE to develop high levels of power with minimal distortion
- OUTPUT DEVICES TECHNOLOGY SPEED-FET
Exclusive Crunch SPEED-FET MOSFET components maximize power efficiency while improving sound quality and minimizing distortion
- HEAT SINK QTD Technology Aluminum
Quick Thermal Dispersion Technology assures additional mass in the aluminum heat sink keeps the amplifier running cool with nearly undetectable distortions during normal music listening.
- POWER SUPPLY PWM Power Supply
High energy Pulse Width Modulated Power Supply delivers power with minimal impact on the electrical system
- OUTPUT CONNECTIONS Nickel Plated
Nickel Plated Brass Connection with terminals allow for secure connection while resisting corrosion
- CONNECTIONS TYPE Screw Down Connectors
Easy access for hand tool allowing a quick and secure connection
- SIGNAL PASS THROUGH YES - Full Range
Allows additional amplifiers to be run from the "output" RCA connections which will minimize the need for additional cables running the length of the vehicle. This can dramatically minimize noise.
- DIAGNOSTICS LED System Protection Circuitry
Monitor overload and speaker short protection with lighted indicators on the amplifier end panel
- UPC: 806576225089
- Weight: 9
- Authorized Internet Dealer
Warranty: 1 Year Manufacturer warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 year from the original date of purchase with proper return authorization.