Kicker 43C104 Comp Series 10" 150W RMS (300W Peak Power Handling) 4 Ohm, Single Voice Coil Component Car Subwoofer
We are a Kicker authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 10" Comp Series Single Voice Coil Component Car Subwoofer
- • Rubber magnet boot (installed)
- • (2) Kicker decals
- • Template on box lid
- • Owner's Manual
Why Choose Kicker 43C104 Component Car Subwoofer?
Double-stitched Together
The woofer cone and surround are double-stitched together, ensuring they won't fall apart, while the Kicker 43C104 delivers a massive bass output. It has a steel basket frame with large vents, allowing the subwoofer to stay cool after extended usage.
Polypropylene Cone and a Ribbed Foam Surround
The Kicker 43C104 comes with a polypropylene cone and a ribbed foam surround, allowing it to give you a deep and accurate low-frequency performance with minimal distortion at high volume levels. It also gives added durability, ensuring that it can withstand the wear and tear that comes from constant use.
Extensive Low-frequency Performance
The Kicker 43C104 can handle a continuous power output of 150 Watts and a peak power output of 300 Watts at 4 ohms. This Kicker Comp subwoofer has a frequency response of 30 to 500 Hz and a sensitivity rate of 86.2 dB, which means that it can bring an extensive low-frequency performance and it can go loud with less noise.
Frequently Asked Questions (FAQ)
- • What amplifier is recommended for this subwoofer?
Choose an amplifier with an RMS power rating close to the subwoofer's continuous power handling. Proper gain adjustment helps deliver clean bass and protects the speaker.
- • Can I install it in either a sealed or ported enclosure?
Yes, it works well in both enclosure types when built to the recommended specifications. Your enclosure choice will determine whether the bass is tighter or louder.
- • Why does my bass sound weak after installation?
Incorrect enclosure size, amplifier tuning, or speaker polarity are common causes. Checking the wiring and crossover settings usually improves bass performance.
- • Can I connect two subwoofers to one amplifier?
Yes, provided the final impedance matches what the amplifier is designed to handle. Always calculate the wiring configuration before installation.
- • Why does it distort when I increase the volume?
Distortion is usually caused by amplifier clipping or gain settings that are too high. Proper amplifier tuning helps produce louder and cleaner bass.
- • Does it needs a break-in period?
Many users recommend several hours of moderate listening after installation. This allows the suspension to loosen naturally and improves overall performance.
- • Why do I hear a popping or rattling sound?
This can happen when the amplifier clips, the enclosure is loose, or the cone exceeds its limits. Inspect the installation and lower the gain if necessary.
- • Is this suitable for a small car?
Yes, its compact size makes it a popular choice for vehicles with limited cargo space. A properly sized enclosure helps maximize its bass performance.
- • Why does the voice coil smell warm after playing music?
A slight warm smell can occur during extended high-power listening sessions. If the odor becomes strong, reduce the volume and verify the amplifier settings.
- • Can this subwoofer play both punchy and deep bass?
Yes, it delivers balanced low-frequency performance when installed in the recommended enclosure. Proper amplifier tuning helps bring out both tight kick drums and deep bass notes.
- Diameter : 10 Inch
- Sensitivity : 86.2 dB
- Impedance : 4 Ohm
- Frequency Response : 30-500 Hz
- Peak Power Handling : 300 Watts
- Number of Voice Coils : Single
- Suggested Sealed Box Volume : 1.0 Cubic ft.
- Suggested Ported Box Volume : 1.25 Cubic ft.
- Mounting Depth : 5-1/16 Inches
- RMS Power Handling : 150 Watts
Features:
- Powerful Bass Performance: Delivers deep, hard-hitting lows to enhance your car audio experience without breaking the bank.
- Versatile Enclosure Compatibility: Works well in both sealed and ported boxes for flexible system tuning.
- Durable Polypropylene Cone: Flex-resistant cone with 360° back bracing ensures accurate low-frequency response with minimal distortion.
- Ribbed Foam Surround: Promotes long cone excursion while keeping the subwoofer on target.
- Double-Stitched Construction: Reinforces the cone and surround bond for long-lasting durability.
- Steel Basket: Provides a strong and stable foundation for heavy bass handling.
- Vented Design: Extensive venting improves heat dissipation and reliability during high-power use.
Specifications:
- Size: 10-inch
- Impedance: 4 Ohm
- Cone Material: Injection-molded Polypropylene
- Surround Material: Ribbed Foam
- Basket Material: Steel
- Grille: None included
- Dual Voice Coil: No
- Sensitivity: 86.2 dB @ 1W/1m
- Frequency Response: 30 – 500 Hz
- Max RMS Power Handling: 150 watts
- Peak Power Handling: 300 watts
- Top Mount Depth: 5" (12.8 cm)
- Bottom Mount Depth: N/A
- Cutout Diameter: 9-1/8" (23.1 cm)
- Outer Frame Dimension: 10-11/16" (27 cm)
- Frame Width & Length: 10.645"
- Vas: 46.94 L (1.65 cu. ft.)
- Fs: 33 Hz
- Qts: 0.585
- Xmax: 10.3 mm
- Recommended Amplifier Power (RMS): 150 watts
- UPC: 713034078630
- Weight: 9.25
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
Do you own this product?
Write a review!
-
Superb quality and its a good looking bass. Lows sound good as you can feel the punch in your chest. Good power output and great value for the price.
