Wet Sounds REVO 6 XS-S V3 Revo Series 6.5" 100W RMS (200W Peak Power Handling) 4 Ohms, 2-Way Coaxial Marine Speakers with RGB LED backlighting Silver XS Open Grille (Pair)
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) 6.5" Revo Series 2-Way Coaxial Marine Speakers
- • (2) 2-way marine speakers with attached grilles
- • (2) Rubber mounting gaskets
- • (2) 8" Waterproof 2-pin female SuperSeal speaker harnesses
- • (2) 8" Waterproof 4-pin female SuperSeal LED (RGB) harnesses
- • (8) 1-1/4" Stainless steel Phillips head screws
- • (2) Templates
- • Owner's Manual
Why Choose Wet Sounds REVO 6 XS-S V3 Marine Speakers?
Marine-Grade Sound, Sealed for Durability
The REVO 6 V3 is built for marine and powersports environments, delivering clear, high-output audio on boats, ATVs, and off-road vehicles. Its 2-way coaxial design pairs a 6.5" injection-molded composite woofer with a Santoprene™ rubber surround and a 1" titanium dome tweeter, while the grille-mounted tweeter keeps the mid-woofer sealed, preventing water intrusion for long-lasting performance.
Durable Construction with Customizable Style
The REVO 6 V3 features a rugged Nylas™ nylon/fiberglass composite basket and durable rubber spider, providing enhanced stability, marine-grade durability, and long-lasting performance. Its variable-color RGB LED lighting illuminates the woofer cone with red, green, and blue LEDs, which can be combined or individually controlled using the Wet Sounds RGB Music Controller (sold separately) for a fully customizable look.
Secure, Protected, and Easy to Install
The REVO 6 V3 features waterproof male 2-pin SuperSeal terminals that connect to included female harnesses for secure, water-resistant wiring. Fixed, non-removable grilles provide added protection and marine safety, while the standard 6.5" cutout with a 5" cutout diameter allows for quick and hassle-free installation.
Frequently Asked Questions (FAQ)
- • Why is there no sound after installation?
Check speaker wiring, amplifier output, source settings, and connections. Confirm positive and negative terminals are connected correctly, and the amplifier receives adequate power.
- • Why do the speakers sound distorted at higher volume?
Check amplifier gain, source volume, and equalizer settings. Excessive gain can cause clipping. Lower the gain and gradually increase volume for cleaner playback.
- • Why is the bass weaker than expected?
Check speaker polarity, amplifier settings, and crossover configuration. Reversed polarity can cause phase cancellation and reduce bass response.
- • Why does one speaker sound quieter than the other?
Check amplifier channels, speaker wiring, balance settings, and connections. A loose terminal or damaged wire can reduce output from one speaker.
- • Why does the speaker rattle during bass-heavy music?
Check mounting hardware, grille, and mounting surface for looseness. Tighten hardware securely and ensure the speaker is mounted firmly.
- • Why isn't the RGB lighting working?
Check RGB wiring, power connection, and controller. Make sure the lighting harness is connected correctly and the controller receives power.
- • What amplifier should I use with these speakers?
Use an amplifier matching the speakers' impedance and recommended RMS power. Avoid exceeding their continuous rating and verify amplifier output before installation.
- • Why does the sound become harsh at high volume?
Harsh audio can result from excessive gain, clipping, or equalizer settings. Reduce amplifier gain and treble levels, then gradually increase volume.
- • Why does the sound change when I move the speakers?
Speaker positioning affects sound dispersion and bass response. Mount speakers securely and adjust their orientation toward the listening area for consistent coverage.
- • Can these speakers handle wet and marine conditions?
Yes. They are designed for marine environments, but proper installation and maintenance remain important. Keep connections secure and rinse saltwater residue after use.
- Diameter : 6.5 Inch
- Sensitivity : 90 dB
- Impedance : 4 Ohm
- Frequency Response : 40-22000 Hz
- RMS Power Range : 100 Watts
- Peak Power Handling : 200 Watts
- Color : Silver
- RMS Power Handling : 100 Watts
Features:
- Marine Rated Performance: The REVO 6 V3 is designed specifically for marine and powersports use, providing clear, high-output sound on boats, ATVs, and off-road vehicles.
- 2-Way Coaxial Driver Design: Combines a 6.5" injection-molded composite cone woofer with Santoprene™ rubber surround and a 1" titanium dome tweeter for crisp highs and strong mid-bass.
- Grille-Mounted Tweeter: The high-output titanium tweeter is mounted on the grille, keeping the mid-woofer sealed and eliminating water intrusion common in many marine coaxial systems.
- Rugged Nylas™ Basket & Rubber Spider: Composite nylon/fiberglass frame and durable rubber spider enhance stability, marine durability, and long-lasting performance.
- Variable-Color RGB LED Lighting: Red, green, and blue LEDs in the tweeter casing illuminate the woofer cone. Colors can be combined or controlled individually using the Wet Sounds RGB Music Controller (sold separately).
- Waterproof Terminals: Male 2-pin SuperSeal plug connects to the included female harnesses for secure, water-resistant wiring.
- Fixed Grilles: Grilles are non-removable for added protection and marine safety.
- Easy Installation: Standard 6.5" marine cutout size with 5" cutout diameter ensures quick, hassle-free installation.
Specifications:
- Speaker Type: 2-Way Coaxial Marine Speaker
- Speaker Size: 6.5 Inches
- Woofer Composition: Injection-Molded Composite Cone
- Woofer Surround: Santoprene™ Rubber
- Tweeter Size: 1 Inch
- Tweeter Composition: Titanium Dome
- RMS Power Handling: 100 Watts
- Peak Power Handling: 200 Watts
- Impedance: 4 Ohms
- Frequency Response: 40Hz – 20kHz
- Sensitivity: 90 dB @ 1W/1m
- Top-Mount Depth: 3.375" (3 3/8")
- Cutout Diameter: 5"
- Frame Diameter: 6.888"
- RGB LED Lighting: Yes (Controller Required, Sold Separately)
- Number of Speakers: 2 (Pair)
- Marine Rated: Yes
- Included Components: Pair of REVO 6 V3 Speakers with SuperSeal Harnesses
- UPC: 814820023183
- Weight: 10
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
