Rockford Fosgate MOTO-REAR2 Add-on Rear Speaker Kit for use with YXZ-STAGE2 and YXZ-STAGE3 Kits
We are a Rockford Fosgate authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- Rockford Fosgate RM1652W-MB:
- • (2) Wakeboard tower speakers
- • (2 )Mounting couplers
- • (2) 16" Speaker harnesses
- • (4) Plastic grommets
- • (4 )Mounting bolts
- • (2) Security bolts (pre-installed)
- • (4) Nuts
- • (2 )Safety lanyards
- • (2) Lanyard washers
- • Torx wrench
- Rockford Fosgate PM-CL2B:
- • (2) Mounting clamps
- Rockford Fosgate RFXZ-RSW16:
- • 10.5' Left rear speaker harness
- • 10.5 Right rear speaker harness
- • (20) Wire-ties
- • Owner's Manual
Will Take Your Sound to the Next Level
If your Yamaha YXZ is already equipped with Rockford Fosgate's YXZ-STAGE2 or YXZ-STAGE3 system, this MOTO-REAR2 rear speaker set will take your sound to the next level. Or, if you're building your system step-by-step, this package can be the perfect finishing touch.
Installation is Quick, Easy, and Secure
This Element Ready system includes a pair of RM1652W-MB 6-1/2" speakers in enclosures, plus mounting clamps and a rear speaker harness that's designed especially for the YXZ. The mounting clamps bolt directly to the factory attachment points, so no drilling is required. Installation is quick, easy, and secure.
Frequently Asked Questions (FAQ)
- • Why Aren’t the Rear Speakers Getting Any Sound After Installation?
The MOTO-REAR2 is an add-on rear speaker kit intended for compatible Rockford Fosgate YXZ Stage 2 or Stage 3 systems. If the speakers remain silent, inspect the included rear speaker harness and confirm it is connected to the correct source and amplifier outputs.
- • Can I Add MOTO-REAR2 to a YXZ Stage 5 System?
Yes, but the installation is different. Rockford's kit information indicates that the MOTO-REAR2 can be added to a Stage 5 system, but the rear speakers must be powered by the built-in amplifier in the PMX source unit.
- • Why Do the Rear Speakers Sound Quieter Than My Front Speakers?
The rear speakers are positioned differently on the YXZ, so their output can seem less direct to the driver. If the difference is excessive, check channel balance, source settings, wiring polarity, and amplifier configuration before changing the speakers.
- • Why Does the Speaker Pod Move or Vibrate on Rough Trails?
Off-road vibration can expose loose clamps or mounting hardware. The MOTO-REAR2 uses die-cast clamps and mounting hardware, so check that the clamp is firmly secured to the cage and that the speaker enclosure cannot rotate or shake during riding.
- • Why Can't I Get the Speaker Pods to Sit in the Position I Want?
The included mounting system allows substantial adjustment, with the speaker pods offering near-360-degree rotational positioning. Rotate the enclosure toward the intended listening area and securely tighten the hardware once the desired angle is found.
- • Why Does My MOTO-REAR2 Installation Need More Time Than Expected?
Rockford estimates approximately one hour for installation, but actual time can increase when an existing audio system needs troubleshooting, wiring has been modified, or access to the cage is restricted. The kit includes dedicated brackets and harnesses to simplify the installation.
- • Why Is the Rear Speaker Harness Not Plugging Into My Existing Wiring?
The MOTO-REAR2 includes a direct-connect YXZ rear speaker harness, but compatibility depends on the existing Rockford system and model year. Verify that the vehicle has the appropriate Stage 2, Stage 3, or supported Stage 5 configuration before forcing or modifying any connector.
- • Why Do My Rear Speakers Cut Out When the YXZ Gets Wet?
The MOTO-REAR2 is designed for harsh outdoor environments and uses Rockford's Element Ready construction, including protection against water, dust, UV exposure, corrosion, and vibration. If sound disappears after water exposure, inspect the harness connections for moisture, looseness, or damage.
- • Why Does the Rear Audio Sound Distorted at Higher Volume?
The included RM1652W-MB speakers are 4-ohm speakers rated around 75W RMS each, so excessive amplifier gain, incorrect channel configuration, or a clipped source signal can produce distortion. Check the amplifier settings and speaker wiring before increasing the volume further.
- • Why Isn't My MOTO-REAR2 Kit Receiving Radio Reception?
The MOTO-REAR2 package does not include an antenna. If the rear speakers were added as part of a new audio installation and the radio has poor or no reception, check that the appropriate antenna is installed and connected separately.
Features:
- Direct connect wiring harnesses for YXZ models
- System is Element Ready to withstand harsh outdoor environment
- RM1652W-MB: Prime Marine 6.5" Rear Speakers in Enclosure - Black (Pair)
- PM-CL2B: Punch Diecast Clamp for Rear Enclosure - Black (Pair)
- RFYXZ-RSW16: Rear Speaker Harness
- *Antenna not included
- package includes 6-1/2" RM1652W-MB speakers in enclosures, PM-CL2B mounting clamps, RFYXZ-RSW16 rear speaker harness
- add rear speakers to the YXZ-STAGE2 or YXZ-STAGE3 kits in your Yamaha YXZ
Compatibility:
- YXZ1000R - 2016/2017
- YXZ1000R SS - 2017
- UPC: 780687351861
- Weight: 15
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
