Alpine ALP-HRN-CAMCH Camera Input Harness for Select 2007-Up Jeep/Chrysler Radios
We are an Alpine authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 4' Factory camera input harness (for Chrysler/Jeep)
- • Instruction sheet
Why Choose Alpine ALP-HRN-CAMCH OEM Backup Camera Interface?
Passenger Side Kick Panel
The ALP-HRN-CAMCH Wrangler JK specific custom harness is the correct length (4-foot RCA Input Cable) to reach down to the passenger side kick panel where the connection is made. It is a perfect match for the Jeep Wrangler specific Spare Tire Rear View Camera System (HCE-TCAM1-WRA). It also works with any Alpine rear view camera system that has a universal connection, like the HCE-C114, HCE-C125, or the HCE-C305R. After installation, the factory radio will require programming to activate the camera input. Programming to open the camera input required by your local Jeep dealership.
Seamless Factory Camera Integration
This specialized camera input harness plugs straight into your factory stereo’s existing harness, allowing you to seamlessly add a high-definition rear or front-view camera feed right onto your stock screen without cutting or splicing a single factory wire.It is the most direct, factory-clean way to bridge the gap between your dependable stock stereo and modern driver assistance tech, ensuring you can back up, park, or hitch a trailer with absolute confidence.
Frequently Asked Questions (FAQ)
- • Will this interface let me keep my factory backup camera after installing a new stereo?
Yes, it is designed to retain compatibility with the OEM backup camera on supported vehicles. This allows you to upgrade your head unit without losing the factory camera's functionality.
- • Is this compatible with every aftermarket receiver?
Compatibility depends on both your vehicle and the aftermarket receiver being installed. Always verify the supported vehicle applications and stereo requirements before purchasing.
- • Why isn't the backup camera displaying an image after installation?
This is usually caused by an incorrect wiring connection, incompatible equipment, or improper installation. Double-checking the wiring and confirming compatibility typically resolves the issue.
- • Can I install this interface myself?
If you have experience with vehicle wiring and stereo installation, the installation is manageable using the proper tools. Professional installation is recommended to ensure reliable operation and prevent wiring issues.
- • Why does the camera image flicker or cut in and out?
Intermittent video is commonly caused by loose connections, damaged wiring, or poor electrical contact. Inspecting every connector and securing the wiring usually fixes the problem.
- • Will this affect any other factory vehicle features?
When installed correctly, the interface is designed to retain the factory backup camera without interfering with normal vehicle operation. Always follow the installation instructions for the best results.
- • Can I use this interface to add an aftermarket backup camera?
No, this interface is intended to retain a compatible factory-installed backup camera. If you're adding a new camera, you'll typically need a dedicated aftermarket camera input instead.
- • Why does the camera activate at the wrong time?
This usually happens because of an incorrect reverse trigger wire connection or installation error. Verifying the reverse signal wiring normally restores proper camera operation.
- • Is this interface worth buying instead of replacing the factory camera?
Yes, retaining the original camera is often more cost-effective and maintains the factory appearance of your vehicle. It also simplifies aftermarket stereo upgrades while preserving a familiar backup camera view.
Features:
- Seamless Factory Radio Camera Integration: Add a rear-view or front-view backup camera to your compatible factory Jeep or Chrysler radio, giving you a convenient way to upgrade your vehicle's visibility without replacing the original stereo.
- Designed for Jeep Wrangler JK Models: Specifically engineered for select 2007–2017 Jeep Wrangler factory navigation systems, this custom harness provides a vehicle-specific connection for a clean and reliable installation.
- Convenient 4-Foot RCA Camera Cable: Enjoy flexible installation with the included 4-foot RCA input cable, designed to reach the passenger-side kick panel for easy camera system connections.
- Compatible with Alpine Camera Systems: Works with the Alpine HCE-TCAM1-WRA spare tire rear-view camera system and compatible universal RCA cameras, including the HCE-C114, HCE-C125, and HCE-C305R.
- Retain Your Factory Stereo Display: Keep your original factory radio in place while adding camera functionality, creating a practical upgrade for improved parking assistance and everyday driving confidence. Factory radio programming is required to activate the camera input.
Specifications:
- Vehicle Compatibility: Select 2007–2017 Jeep Wrangler JK models
- Radio Compatibility: 430 REN, 430 RBZ, 430 RHB, 730N RER, and 730N RHR
- Camera Connection: RCA Camera Input
- Cable Length: 4 Feet
- Installation Location: Passenger-Side Kick Panel
- Camera Support: Rear-View or Front-View Camera Input
- Compatible Camera Systems: Alpine HCE-TCAM1-WRA, HCE-C114, HCE-C125, and HCE-C305R
- Installation Requirement: Factory radio programming required to activate camera input through a Jeep dealership or compatible third-party programmer.
- UPC: 793276040459
- Weight: 1
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for repair within 1 year from the original date of purchase with proper return authorization.
