Autotek MEAN MACHINE series of car audio amplifiers bring extreme power with PRO-FI™ High Speed MOSFETS and high sound quality with minimum distortion levels. The MM1620.4 features 1600 watts of power in a bridgeable 4 channel Class A/B amplifier with larger heatsink providing very musical bass with dramatically reduced noise. The amplifier can be run from the "output" RCA connections which minimize the need for additional cables running the length of the vehicle.
- Maximum Power : 1600 Watts
- Low Frequency Response : 30-250 Hz
- High Frequency Response : 30-250 Hz
- Number of Channels : 4
- Frequency Response : 30-12000 Hz
- Built In Crossovers : Yes
- RMS Power Output : 400x4 Watts
- Channel Separation : Yes
- Amplifier Class : A/B
- Fuse Rating : 20x2 A
Features:
- LOW NOISE PRE-AMPLIFIER CIRCUITRY
- Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process
- RCA INPUTS
- RCA inputs and outputs provide the highest sound quality connection
- HI LEVEL INPUTS
- High level inputs easily tie into OEM audio systems that do not offer RCA output. Molex connector is included
- OPERATION MODE
- 4 channel operation mode allows either stereo or mono bridged operation
- CROSSOVER TYPE
- Switched
- FULL / LPF / HPF for complete control of amplifier signal which is essential when using two or more amplifiers
- ELECTRONIC EQUALIZER
- Electronic equalizer provides control of amplifier output with onboard electronic crossover to tailor specific frequencies to speakers and subwoofers
- CLASS / TOPOLOGY
- Class A/B amplifiers have larger heatsinks with very musical bass
- OUTPUT DEVICE TECHNOLOGY
- MEAN MACHINE'S ROAD WORTHY™ TCID (Twin Coil Isolation Design) and PRO-FI™ High Speed MOSFETS bring extreme power with high sound quality and minimum distortion levels
- HEAT SINK
- Heavy-duty aluminum alloy heatsink with illuminated connectors provide a blue wash of light from the heatsink underside
- POWER SUPPLY
- High energy PWM (Pulse Width Modulated) power supply provides MAXXimum power with minimal electrical impact
- OUTPUT CONNECTIONS
- Nickel-plated brass connectionwith hex set screw terminals allow for secure connection and resist erosion
- CONNECTION TYPE
- Angled, Allen Key connectors provide easy access for hand tools allowing a quick and secure connection
- FULL-RANGE RCA OUTPUTS FOR SIGNAL PASS THROUGH
- Full-range signal pass through output allows additional amplifiers to be run from the "output" RCA connections which minimize the need for additional cables running the length of the vehicle. This can dramatically minimize noise.
- LED SYSTEM PROTECTION CIRCUITRY DIAGNOSTICS
- Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
Specifications:
- CLASS
- VARIABLE VOLTAGE
- SIGNAL TO NOISE
- FREQUENCY RESPONSE
- CROSSOVER
- CH1 & CH2: Switchable: FULL / LPF / HPF
- CH3 & CH4: Switchable: HPF / LPF / FULL
- VARIABLE HIGH PASS CROSSOVER 12DB PER OCTAVE
- CH1 & CH2: Switchable: HPF / LPF / FULL
- HPF: 60Hz - 1.2kHz
- CH3 & CH4: Switchable: HPF / LPF / FULL
- HPF: 60Hz - 1.2kHz
- VARIABLE LOW PASS CROSSOVER 12DB PER OCTAVE
- CH1 & CH2: Switchable: HPF / LPF / FULL
- LPF: 30Hz-250Hz
- CH3 & CH4: Switchable: HPF / LPF / FULL
- LPF: 30Hz-250Hz
- TONE CONTROL/PARAMETRIC EQ
- BASS BOOST
- POWER @ 1 OHM
- POWER @ 2 OHMS
- POWER @ 4 OHMS
- MONO BRIDGED @ 4 OHMS
- TOTAL CHANNELS
- AUDIO INPUTS
- AUDIO OUTPUTS
- POWER TERMINAL 12V/GND
- SPEAKER TERMINAL WIRE GAUGE
- FUSING
- TOTAL HARMONIC DISTORTION (THD)
- UPC: 818060014062
- Weight: 10
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.