XS Power XSP320-312 Controller and Harness for GM "CS" Series Alternators (1986 to 1997), Blue Display
We are a XS Power Authorized Dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • Controller and Harness
- • Owner's Manual
VCM Controller & Harness for GM CS Alternators
Upgrade your GM charging system with the XS Power XSP320-312 VCM Controller and Harness. Designed specifically for GM “CS” Series Alternators from 1986–1997, it provides adjustable voltage control for 12V, 14V, and 16V applications.
Frequently Asked Questions (FAQ)
- • Why does my XSP320-312 show a voltage that keeps jumping around?
Some VCM users have reported voltage moving up and down while driving instead of remaining at the selected setting. If this happens, inspect the controller settings, alternator, wiring, and electrical connections before assuming the module itself is defective.
- • Why won't my XSP320-312 adjust the alternator voltage?
A reported VCM problem involved the voltage refusing to change even when the user pressed the adjustment controls. Incorrect configuration, an incompatible alternator connection, or a faulty controller can produce similar symptoms, so the harness and application should be verified first.
- • Can the XSP320-312 accidentally push my 12V battery voltage too high?
Yes, incorrect settings can allow excessive voltage. XS Power specifies that a 12V XS Power battery should never exceed 14.9V, even though the controller's 12V configuration can be programmed higher.
- • Why did my electrical accessories start cycling on and off after installing the VCM?
One user reported aftermarket electronics repeatedly switching on and off when the VCM produced excessive voltage. If connected electronics begin behaving strangely, stop using the system and verify the actual charging voltage immediately.
- • Why does my amplifier go into protection when the bass load changes?
A real-world VCM report described voltage spikes occurring when the bass signal changed, causing equipment to enter protection. Sudden charging-voltage changes can affect sensitive electronics, making voltage monitoring particularly important in high-output audio systems.
- • How do I know if the XSP320-312 is the correct harness for my alternator?
The XSP320-312 is designed for GM “CS” series alternators from 1986–1997, and VCM harnesses are application-specific. XS Power advises checking the actual alternator plug because model years alone may not always identify the correct connector.
- • What if my alternator has a different connector than the XSP320-312 harness?
A mismatched connector can prevent the VCM from functioning correctly. Users have encountered problems when the alternator plug did not match the supplied harness, so comparing the physical connector before installation can prevent unnecessary wiring changes.
- • Can the XSP320-312 be used with 14V or 16V battery systems?
Yes. The XSP320-312 supports 12V, 14V, and 16V systems, but the correct configuration must be selected before operation. XS Power lists maximum limits of 14.9V for 12V batteries, 16.9V for 14V batteries, and 19.5V for 16V batteries.
- • Why is my XSP320-312 not working even though the wiring looks correct?
A clean installation does not always rule out an application or controller problem. Real users have reported unstable or non-adjustable VCM behavior despite carefully installed wiring, making it important to verify the alternator type, harness compatibility, dip-switch configuration, grounds, and measured voltage.
- • Is it safe to leave the XSP320-312 at a high voltage setting all the time?
Not necessarily. The appropriate voltage depends on the battery and electrical components being used. XS Power warns that excessive voltage can damage batteries and other components, so the selected setting should remain within the safe operating limits of the entire electrical system.
Features:
- GM CS Compatibility: Designed for 1986–1997 GM “CS” Series Alternators.
- VCM Controller & Harness: Complete control solution for compatible alternators.
- Wide Voltage Range: Operates from 10–20 volts.
- 12V Mode: Adjustable from 14.2V up to a programmed 15.2V limit.
- 14V & 16V Mode: Adjustable up to a programmed 19.5V limit.
- Dip Switch Settings: Configures the controller for different voltage systems.
- Performance Ready: Ideal for high-output electrical and custom charging setups.
- UPC: 692209051268
- Weight: 1.01
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
