XS Power XP1000 16V AGM Battery, Max Amps 2,400A CA: 675A
We are a XS Power Authorized Dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • XS Power Battery
- • Owner's Manual
High-Performance 16V AGM Power
Built for demanding applications, the XS Power XP1000 delivers up to 2400 amps of powerful 16V performance in a sealed AGM design that keeps electrolyte securely contained for dependable operation. With a compact 10.24" × 6.75" × 7.20" size and M10 terminal hardware included, it’s a rugged, high-output battery designed to keep serious electrical systems powered when performance matters most.
Frequently Asked Questions (FAQ)
- • Why does my XP1000 lose power even though it was recently charged?
A battery that appears charged but quickly drops in performance can point to improper charging, excessive parasitic draw, or a battery that has been deeply discharged. The XP1000 is a 16V AGM battery, so using the correct charging procedure is essential for maintaining its performance.
- • Can I connect the XP1000 directly to a standard 12V vehicle electrical system?
The XP1000 is designed as a 16V racing battery, so it should not automatically be treated like a conventional 12V replacement. Before installation, verify that the vehicle, alternator, electronics, and accessories are designed to tolerate the higher operating voltage.
- • What should I do if my XP1000 gets unusually hot while charging?
Excessive heat during charging can be a warning that the charger settings or charging process are not appropriate. XS Power's published care information specifies controlled charging and an automatic shut-off charger, making charger compatibility an important part of troubleshooting.
- • Why does my XP1000 seem to be overcharging?
Overcharging has been reported as a concern by some users of XP1000 battery-and-charger combinations. The battery's charging voltage must be controlled carefully; XS Power's guidance states that charging voltage should not remain above 2.45 volts per cell ±0.05V for extended periods.
- • Why won't my XP1000 start the engine after sitting unused?
Even a high-output AGM battery can discharge when left unused, especially if the vehicle has electrical accessories drawing current. If an XP1000 has been sitting for an extended period, check its resting voltage and recharge it using a charger appropriate for a 16V AGM battery rather than assuming the battery has failed.
- • Does the XP1000 require special terminal hardware?
The XP1000 is available with stud-style terminal hardware, and listings specify M10 hardware on certain versions. If your vehicle's factory cable ends do not match the battery terminals, the correct adapters or terminal hardware may be required for a secure connection.
- • Why does my XP1000 work well for racing but seem unsuitable for normal daily driving?
The XP1000 was designed as a 16V AGM performance/racing battery rather than a universal 12V replacement. Users considering it for everyday vehicles should confirm that the entire electrical system is compatible with 16V operation before making the switch.
- • What if my XP1000 arrives with low voltage or appears completely dead?
A battery that arrives discharged or damaged should be inspected before installation. Online customer reports have included complaints involving batteries arriving dead or physically damaged, although these reports are not representative of every XP1000 purchase. If this happens, document the condition immediately and contact the seller or manufacturer rather than attempting an improper recovery procedure.
- • How can I prevent my XP1000 from developing charging or longevity problems?
Use a compatible automatic charger, avoid leaving the battery at an incorrect charging voltage for prolonged periods, and follow the manufacturer's maintenance instructions. Reports of overcharging and reduced service life highlight why proper charging practices matter with this 16V AGM battery.
- • Is the XP1000 powerful enough for demanding competition audio systems?
The XP1000 is rated for up to 2,400 amps with 675 cranking amps, making it capable of delivering substantial current for high-demand applications. However, the battery should be matched with an appropriately designed 16V electrical system, charging source, wiring, and connected equipment rather than relying on battery capacity alone.
Features:
- Length: 10.24 in
- Height: 7.20 in
- Width: 6.75 in
- MAX Amps: 2400
- CA: 675
- 575 with M10 Terminal Hardware Included
- UPC: 692209015819
- Weight: 46.5
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
