facebook no script image

XS Power  TB-606v1

600 Series Aluminum Terminal Blocks, 1/0, 6 Spots, M6/M8 Bolts, Pair

Item #56718

Condition:   Brand New

Product Highlights

  • Strong 600 series aluminum
  • Works with 1/0 gauge wire
  • Has 6 connection points
  • Comes with M6/M8 bolts
  • Sold in pairs

  Free 2-Years Warranty Included!
60 DAYS Returns Accepted.
FREE Lifetime Tech Support.
FREE Shipping.
60 DAYS Price change protection.

$75.99

Reg. Price $79.99  Save 5%
60 DAYS Returns Accepted.
FREE Lifetime Tech Support.
FREE Shipping.
60 DAYS Price change protection.

Out of Stock Check out other products listed below
XS Power Authorized Dealer

Huge Saving on Other items:



Huge Saving on Other items:


Morel Banner

XS Power TB-606v1 600 Series Aluminum Terminal Blocks, 1/0, 6 Spots, M6/M8 Bolts, Pair


Morel Banner

We are a XS Power authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!

What's Inside?
  • • Aluminum Terminal Blocks
  • • Owner's Manual
XS Power TB-606v1 600 Series Aluminum Terminal Blocks

Upgrade your battery wiring with the XS Power TB-606v1 Terminal Blocks, built to organize and simplify high-performance electrical connections. This pair features six connection spots and supports 1/0 wiring with versatile M6/M8 bolt compatibility.

 


Frequently Asked Questions (FAQ)


  • • Why won't my 1/0 AWG cable fit properly into the TB-606v1?
    The TB-606v1 is designed for 1/0 AWG wiring, but the cable lug still needs to be properly sized for the block's hardware. Check that the lug opening and thickness match the supplied connection hardware before tightening.
  • • Why does my cable still move after tightening the terminal block?
    A cable can remain unstable if the ring lug is not sitting completely flat or if the hardware is not clamping the lug evenly. Reposition the cable and make sure there is no insulation trapped beneath the connection.
  • • What is the difference between the M6 and M8 bolts on the TB-606v1?
    The included M6 and M8 hardware provides different mounting and connection options. Select the hardware that matches the terminal or mounting point being used rather than assuming both sizes serve the same purpose.
  • • Can I connect six cables to each TB-606v1 block?
    The product is advertised with six connection points, but that does not mean every installation should automatically use all six. Make sure each connection has enough physical clearance and that the total current is appropriate for the wiring and electrical system.
  • • Why am I seeing voltage drops after installing the TB-606v1?
    The terminal block does not increase the electrical output of the battery. Voltage loss can come from loose hardware, poorly crimped lugs, contaminated contact surfaces, undersized wiring, or excessive current through the overall circuit.
  • • Is it normal for the aluminum block to become warm under heavy load?
    A small amount of temperature increase can occur when substantial current passes through a connection. However, excessive heat can indicate high resistance caused by a loose connection, inadequate cable termination, or an overloaded circuit and should be investigated immediately.
  • • Why doesn't my terminal block fit in the space where I planned to install it?
    The TB-606v1 is built to accommodate multiple 1/0 AWG connections, so the completed assembly can require more room than a single cable terminal. Plan for the block, cable bend radius, fasteners, and surrounding clearance before mounting.
  • • Can I use the TB-606v1 with smaller wires than 1/0 AWG?
    The TB-606v1 is specifically listed for 1/0 AWG cable, so using smaller conductors should be evaluated based on the actual terminal fit and the electrical requirements of the installation. Do not rely on the block alone to determine safe wire sizing.
  • • Why does my connection loosen after driving or operating off-road?
    Vibration can gradually expose a connection that was not adequately secured. Make sure the block is firmly mounted and that heavy cables are supported so their weight and movement are not continuously pulling against the terminal hardware.
  • • Is the TB-606v1 suitable for a high-current car-audio system?
    Yes, it is designed as a power-distribution solution for demanding electrical applications and provides six connection points for 1/0 AWG wiring. The block itself, however, should be used as part of a properly sized system with appropriate batteries, cables, fuses, and secure connections.

SPECIFICATIONS



FEATURES


Features:

  • 600 Series aluminum terminal blocks
  • Includes 6 connection spots
  • Designed for 1/0 gauge wiring
  • M6/M8 bolt compatibility
  • Includes a pair of terminal blocks
  • Ideal for XS Power battery applications
  • UPC: 692209053163
  • Weight: 1
  • Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.

Do you own this product?

Write a review!

Must haves for XS Power TB-606v1:

Other items that might interest you:

Other customers also shopped for: