SSV Works JJL-DS10 2018+ Jeep Wrangler JL 4-Door 10" Loaded Sub Enclosure with SSV Works 10M Subwoofer
We are a SSV Works authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 10" Loaded Sub Enclosure
- • Top bracket (MB-1)
- • Bottom bracket (MB-2)
- • Owner's Manual
Jeep Wrangler JL 10" Cargo Subwoofer
Bring deep, powerful bass to your Jeep Wrangler Unlimited JL with a custom-fit SSV Works 10" subwoofer enclosure. The 300W RMS sub mounts neatly along the driver-side cargo wall while preserving usable space. With a no-drill bolt-in design, rugged fiberglass construction, and factory-inspired finish, it's a clean upgrade for both daily driving and off-road adventures.
Deep Bass, Zero Drilling
Upgrade your Wrangler JL audio with a space-saving 10" SSV Works subwoofer built for serious low-end performance. The 600W peak enclosure installs using existing factory bolts, keeping your Jeep untouched while adding powerful bass. A durable fiberglass build, stainless hardware, and flexible wiring options make this setup ready for the road or trail.
Frequently Asked Questions (FAQ)
- • Why does the JL subwoofer sound weak in the enclosure?
Check the amplifier power, gain, crossover, and speaker polarity to ensure the sub is being driven correctly.
- • Why does the bass become distorted at higher volume?
Excessive amplifier gain or clipping can cause distortion. Lower the gain and adjust the crossover before increasing volume.
- • Can the enclosure handle wet trail conditions?
SSV Works describes its enclosures as weatherproof and built for demanding powersports environments, but wiring connections should still be protected from moisture.
- • Why does the enclosure rattle when the bass hits?
Loose mounting brackets, screws, or nearby panels can create vibration. Recheck all mounting points and hardware.
- • Will every 10-inch subwoofer fit this enclosure?
No. Mounting depth and physical dimensions matter even when a woofer is labeled 10 inches. SSV Works lists a maximum mounting depth of 7.8 inches for its universal 10-inch enclosure.
- • Why is there almost no bass after connecting the sub?
Verify the amplifier's low-pass filter, gain, signal input, and subwoofer wiring before replacing any components.
- • Can the subwoofer be connected to a non-SSV amplifier?
Yes. SSV Works notes that its plug can be removed and the enclosure wiring connected directly to an aftermarket amplifier.
- • Why does the bass change after moving the enclosure?
Different mounting locations can affect cabin acoustics and bass response. Make sure the enclosure remains securely mounted and has adequate clearance.
- • What causes the subwoofer to cut out during rough driving?
A loose power, ground, or speaker connection can momentarily interrupt the signal when the vehicle experiences heavy vibration.
- • Does the enclosure include an amplifier?
No. The SSV Works enclosure can include a subwoofer depending on the configuration, but the amplifier is sold separately.
Features:
- Jeep Wrangler JL Fit: Purpose-built for select Jeep Wrangler Unlimited JL models, this enclosure adds serious bass while keeping the cargo area practical.
- Loaded 10" Subwoofer: Includes an SSV Works 10" subwoofer rated for 300W RMS and 600W peak power for deep, powerful low-end performance.
- Driver-Side Cargo Mount: The 0.7 cu. ft. enclosure fits neatly along the driver's side rear cargo wall for a clean, space-conscious installation.
- No-Drill Installation: Mounts to existing factory bolts, allowing a secure bolt-in installation without modifying or drilling your Jeep.
- Durable Fiberglass Build: Paintable fiberglass construction provides a rigid enclosure for improved bass performance and long-term durability.
- Factory-Matching Finish: The custom finish is designed to complement the Jeep's stock interior for a clean, integrated appearance.
- Plug-In SSV Works Connection: A 16" attached speaker wire with a proprietary connector makes connection to compatible SSV Works systems quick and simple.
- Flexible Amplifier Wiring: For non-SSV Works systems, the connector can be removed and the red positive/black negative wires connected directly to your amplifier wiring.
- Secure Hardware: Stainless-steel mounting hardware provides a durable installation ready for everyday driving and off-road adventures.
- Built for Jeep Adventures: Add deep, powerful bass without giving up the clean factory look or making permanent changes to your Wrangler.
Specifications:
- Model: JJL-DS10
- Vehicle: Select Jeep Wrangler Unlimited JL models
- Subwoofer Size: 10"
- Subwoofer: SSV Works SSV-10M
- Power Handling: 300W RMS / 600W peak
- Enclosure Volume: 0.7 cu. ft.
- Enclosure Material: Fiberglass
- Finish: Custom factory-style finish
- Mounting Location: Driver-side rear cargo area
- Installation: Bolt-in, no drilling required
- Mounting Points: Three existing factory bolts
- Speaker Wire: 16" attached input wire
- Connector: Proprietary SSV Works connector
- Alternative Wiring: Red positive / black negative speaker wires
- Mounting Hardware: Stainless steel
- UPC: 815172016427
- Weight: 31
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
