MB Quart NPT1-116 Nautic Premium Series 6.5" 120W Peak Power Handling, 4-Ohms Wake Tower Speakers
We are a MB Quart authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- •(2) Enclosed 6.5" marine speakers w/ installed "B" clamp and black grilles
- •(2) White grilles
- •(2) Silver grilles
- •(2) "A" clamps
- •(20) Sets of rubber clamp-bushings (1.5"/1.625"/1.75"/1.875"/2"/2.125"/2.25"/2.375"/2.50"/2.625"/2.75")
- •(4) Crimp connectors
- •(2) MB Quart logos w/ adhesive backing
- • Owner's Manual
Bring Outstanding Performance and Marine-rated Durability to Your Weekend Adventures
MB Quart's NPT1-116 tower speakers bring outstanding performance and marine-rated durability to your weekend adventures. This tough tower speaker is encased in a strong, lightweight ABS enclosure that protects the speaker while also improving volume and bass response — exactly what you want on your ski boat or ATV.A 1 inch Titanium Dome tweeter utilizing Waterproof Coated Silk Surround.
Result of This Configuration is Natural Sounding High Frequency Response
The result of this configuration is natural sounding high frequency response while producing high volume (SPL) without the typical harshness or distortions which can occur at higher listening levels. Injection Molded Composite Polypropylene Cone: Delivers impactful bass with minimal cone flex which can cause distortion or sloppy bass.
Maximize Bass Frequency Power
Co-Molded Santoprene™ Surrounds: The cone and surround are coupled in such a way to maximize bass frequency power while remaining impervious to the outdoor environment including colder weather.Molded Polymer Sealing gaskets are utilized to keep the speaker isolated from the mounting surface and improve protection from water intrusion.An Aramid fiber composite spider is used to stabilize the cone and voice coil in all musical situations. Aramid fibers do not degrade over time and are not susceptible to temperature swings.
Cast Enclosure Provides Strength and Improved Bass Response
Front and rear venting allows air passage through the spider and back plate to exchange air over the voice coil.Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection. Composite (UV resistant ASA + Fiberglass) cast enclosure provides strength and improved bass response with increased volume while remaining very lightweight.
- Diameter : 6.5 Inch
- Sensitivity : 91 dB
- Impedance : 4 Ohm
- Frequency Response : 70-20000 Hz
- Peak Power Handling : 120 Watts
- Color : Black
- RMS Power Handling : 60 Watts
Features:
- Marine Grade Protection / IPX Rating: LIFE SHIELD - Protected for water and dirt. UV protected against sun fade. 72 Hour UVA Burn In Certified. IPX68 rated.
- Tweeters: A 1 inch Titanium Dome tweeter utilizing Waterproof Coated Silk Surround. The result of this configuration is natural sounding high frequency response while producing high volume (SPL) without the typical harshness or distortions which can occur at higher listening levels.
- Cone Material: Injection Molded Composite Polypropylene Cone: Delivers impactful bass with minimal cone flex which can cause distortion or sloppy bass.
- Surround / Cone Coupling: Co-Molded Santoprene™ Surrounds: The cone and surround are coupled in such a way to maximize bass frequency power while remaining impervious to the outdoor environment including colder weather.
- Gasket: Molded Polymer Sealing gaskets are utilized to keep the speaker isolated from the mounting surface and improve protection from water intrusion.
- Spider: An Aramid fiber composite spider is used to stabilize the cone and voice coil in all musical situations. Aramid fibers do not degrade over time and are not susceptible to temperature swings.
- Cooling System: Front and rear venting allows air passage through the spider and back plate to exchange air over the voice coil.
- Crossover: Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection.
- Enclosure: Composite (UV resistant ASA + Fiberglass) cast enclosure provides strength and improved bass response with increased volume while remaining very lightweight.
- Frame: Composite (UV Resistant ASA + Fiberglass) Frames are incredible strong and lightweight, but most important for music they are inert, meaning they have no resonance frequency, this assures all music and minimal distortion.
- Motor: The tweeters feature High-Energy N38H Neodymium Motors: The Neodymium magnet is the strongest magnet that can be used while remaining very light-weight. The midwoofer utilizes a High-Energy Ferrite Magnet which allows the magnetic energy to react quickly making the bass sound fast and tight.
- Connectors: Real 10 Karat Gold plated, water resistant connectors provide protection against rust and corrosion.
- Grills: PERSONALIZED FINISH - The Nautic Premium marine and off-road vehicle waterproof speakers are finished in a hardened composite with their color inspired by the black sand beaches of Kaimu Hawaii. Each speaker includes three different grills. Kaimu Black, Miami Silver and Bahama White. Many enthusiasts use the white insert to lightly sand and paint to match their personal style and vehicle.
- Hardware: Eleven mounting hardware options from 1.5 to 2.75 inches included.
Specifications:
- Type: Speaker
- Brand: MB Quart
- Series: Nautic Premium
- Category: Marine, Powersports
- Condition: New
- Color: Black
- CEA Standards: CEA426B
- Speaker RMS Power Handling (watts): 60
- Speaker Peak Power Handling (watts): 120
- Speaker Impedance (ohms): 30Hz-22kHz
- Speaker Sensitivity: 91dB
- Speaker Crossover Slope: 12dB/octave
- Speaker Tower Length (in): 8
- Speaker Hang Height (in): 7
- Speaker Height (in): 8.4
- Speaker Width (in): 8.4
- Speaker Size (in): 6.5
- UPC: 806576229957
- Weight: 9
- Authorized Internet Dealer
Warranty: 1 Year Manufacturer warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 year from the original date of purchase with proper return authorization.
