Wet Sounds REVO 10 FA S2-W V2 REVO Series 10" 300W RMS (600W Peak Power Handling) 2 Ohms, Marine Subwoofer Free Air - White
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 10" REVO Series Marine Subwoofer
- • Owner's Manual
Why Choose Wet Sounds REVO 10 FA S2-W V2 Marine Subwoofer?
Effortless Free Air Bass with Big Power
Optimized for Free Air (Infinite Baffle) setups, this subwoofer delivers deep, powerful bass without a dedicated enclosure, and can also perform in a 1.3cuft sealed box. With 300W RMS (600W peak) power handling, it provides high-performance low-end for any vehicle or marine system.
Marine-Grade Bass with Easy Integration
Built to last, this subwoofer features an injection-molded polypropylene cone with Santoprene rubber surround and spider for marine-grade durability. With a single 2Ω impedance, it offers flexible wiring options for seamless integration into marine or vehicle audio systems.
Stylish, Compact Bass Solution
Personalize your setup with optional REVO subwoofer grills (sold separately) and RGB LED kits for a look that matches your style. With a shallow 4.62" mounting depth, this subwoofer fits easily into most tight spaces without sacrificing performance.
Frequently Asked Questions (FAQ)
- • What amplifier should I use for this subwoofer?
A 2-ohm stable amplifier delivering around 300 watts RMS is a suitable match. Set the gain properly to prevent clipping and distortion.
- • Why does the bass sound weak after installation?
Free-air installations require proper front-to-rear air separation for strong bass. Check for air leaks and make sure the mounting surface is solid.
- • Can I install it without a subwoofer box?
Yes, it is designed primarily for free-air or infinite-baffle installations. It can also be used in a properly sized 1.3 cubic-foot sealed enclosure.
- • Why does the bass distort at high volume?
Excessive gain or amplifier clipping can cause distorted bass at higher volumes. Lower the gain and ensure the amplifier is stable at 2 ohms.
- • What size mounting hole is required?
The required cutout is approximately 9.45 inches. Allow about 4.62 inches of mounting depth for proper clearance.
- • Why does the subwoofer rattle during heavy bass?
Loose mounting hardware or a flexible mounting surface can create unwanted vibrations. Tighten the screws and reinforce the mounting area if necessary.
- • Why isn't the subwoofer producing any sound?
Check the amplifier power, speaker wiring, and audio signal connections first. Loose terminals or incorrect amplifier settings can also prevent output.
- • Why does the bass change depending on where it is mounted?
Free-air bass response can change significantly with mounting location and air separation. Choose a rigid location that keeps the front and rear sound waves isolated.
- • Does it come with a protective grille?
The subwoofer is sold without a grille, so a compatible grille must be purchased separately. Optional RGB LED kits are also available for compatible grille installations.
- • Is it suitable for marine and outdoor installations?
Marine-oriented materials include a composite frame, Santoprene surround and spider, and stainless steel terminals. Proper installation and regular inspection can help maintain reliable performance in outdoor environments.
- Diameter : 10 Inch
- Sensitivity : 88 dB
- Impedance : 2 Ohm
- Frequency Response : 20-500 Hz
- RMS Power Range : 300 Watts
- Peak Power Handling : 600 Watts
- Color : White
- Mounting Depth : 4.62 Inches
- Free Air : Yes
Features:
- Free Air Design: Optimized for Infinite Baffle / Free Air applications—no dedicated enclosure needed. Can also work in a 1.3 cu ft sealed box.
- High-Performance Subwoofer: Handles up to 300W RMS and 600W peak for deep, powerful bass.
- Durable Construction: Injection-molded polypropylene composite cone with Santoprene rubber surround and spider for marine-grade durability.
- Flexible Wiring: Single 2Ω impedance allows easy integration into marine or vehicle audio systems.
- Customizable Look: Compatible with optional REVO subwoofer grills (sold separately) and RGB LED kits.
- Compact Installation: Mounting depth of 4.62" fits most tight spaces.
Specifications:
- Subwoofer Size: 10"
- Impedance: Single 2Ω
- RMS Power: 300 watts
- Peak Power: 600 watts
- Frequency Response: 20–500 Hz
- Sensitivity: 88 dB at 1W/1m
- Woofer Cone: Injection-molded polypropylene composite
- Surround: Santoprene™ rubber
- Top-Mount Depth: 4.62" (117.47 mm)
- Cutout Diameter: 9.45" (240.03 mm)
- Diameter w/ Grill: 11.02" (279.9 mm)
- Series: REVO
- Cone Color: White
- Application Type: Free Air
- UPC: 814820027594
- Weight: 10
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
