Wet Sounds REVO 12 PSE SWW REVO PSE Series 12" 1000W Peak Power Handling 4 Ohms, Passive Radiator Marine Subwoofer Enclosure
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 12" REVO PSE Series Marine Subwoofer Enclosure
- • (2) Hard-mounted clamps
- • (2) Quick-lock clamps
- • 7" Speaker harness
- • 7" RGB harness
- • (8) 40mm screws
- • Owner's Manual
Why Choose Wet Sounds REVO 12 PSE SWW Enclosed Car Subwoofer?
World’s First 15" SPL Marine Subwoofer
The REVO 15-XXX delivers earth-shaking bass for serious marine audio enthusiasts, making it the first purpose-built 15” SPL marine subwoofer. Engineered with advanced CAD and full Finite Element Analysis, it withstands extreme use while handling 2000W RMS (4000W peak) for massive, high-output bass on any boat.
Rugged, High-Output Marine Bass
Built for serious performance, this subwoofer features a matte black polypropylene/carbon/glass fiber hybrid cone for maximum rigidity and minimal distortion. Equipped with a high-roll Santoprene rubber surround, fiberglass former, and dual 5" voice coils, it delivers long-lasting, reliable bass in demanding marine environments.
High-Power Bass with Maximum Reliability
Stay cool under extreme power with a multi-part cooling system featuring a T-yoke heat sink and peripheral/pole piece venting. Gold-plated screw-down terminals and a heavy-duty magnet ensure secure, corrosion-resistant connections, while flexible installation options for Free Air or enclosure use make it easy to integrate into any marine audio system.
Frequently Asked Questions (FAQ)
- • What amplifier should I use with this subwoofer?
A 4-ohm amplifier delivering around 500 watts RMS is a suitable match. Wet Sounds recommends amplifiers such as the HTX-1, HTX-2, SYN-DX4, or SDX-4.
- • Why does the bass sound weak after installation?
Incorrect gain, crossover, polarity, or placement can reduce bass output. Check the amplifier settings and make sure the connections are secure.
- • Why does the bass distort at high volume?
Excessive gain or amplifier clipping can cause distortion during loud playback. Lower the gain and make sure the amplifier delivers clean power.
- • Why isn't the subwoofer producing any sound?
Check the amplifier power, audio signal, fuse, and speaker connections. Also verify that the 4-ohm load is properly connected to the amplifier.
- • Why does the enclosure rattle during heavy bass?
Loose mounting hardware or nearby trim can create unwanted vibrations. Tighten the mounts and inspect surrounding panels for loose components.
- • Can the enclosure be mounted in different positions?
Yes, the enclosure supports multiple mounting positions with quick-release hardware. Choose a secure location with enough clearance around the enclosure.
- • Why does the bass change when I move the enclosure?
Placement affects how low frequencies interact with nearby surfaces. Try another secure position if the bass response changes noticeably.
- • Why aren't the RGB lights working?
The enclosure is pre-wired for optional RGB lighting, but the RGB kit is sold separately. Check the RGB harness and connections if the lighting does not operate.
- • Will it fit in my available installation space?
The enclosure measures approximately 15.5 inches on each side. Measure the mounting area and allow room for wiring and quick-release hardware before installation.
- • Is it suitable for marine and outdoor installations?
The rotomolded enclosure and weatherproof connections are designed for marine applications. Proper mounting and regular inspection can help maintain reliable performance in outdoor conditions.
- Diameter : 12 Inch
- Sensitivity : 88 dB
- Impedance : 4 Ohm
- Frequency Response : 20-400 Hz
- Peak Power Handling : 1000 Watts
- Enclosure Type : Ported
- RMS Power Handling : 500 Watts
Features:
- Extreme SPL Performance: The REVO 15-XXX is the first purpose-built 15” SPL marine subwoofer, delivering earth-shaking bass for serious marine audio enthusiasts.
- Advanced Engineering: Designed from the ground up using CAD and full Finite Element Analysis, ensuring a subwoofer built to withstand extreme use.
- High-Power Handling: Capable of 2000W RMS and 4000W peak, providing massive bass output for boats and marine applications.
- Premium Composite Cone: Features a matte black polypropylene/carbon fiber/glass fiber hybrid cone for maximum rigidity and minimal distortion.
- Durable Surround & Voice Coils: Equipped with high-roll thermoformed Santoprene rubber surround, fiberglass former, and dual 5-inch voice coils for long-lasting performance.
- Integrated Cooling System: Multi-part cooling system with T-yoke heat sink and combination peripheral/pole piece venting ensures high power output while keeping voice coil temperatures low.
- Secure Connections: Gold-plated screw-down binding posts and a heavy-duty magnetic system provide reliable and corrosion-resistant connectivity.
- Flexible Installation: Optimized for infinite baffle (free air) or enclosure use, making it easy to integrate into various marine audio systems.
Specifications:
- Subwoofer Size: 15 inches
- Impedance: Dual 2 ohms
- RMS Power: 2000W
- Peak Power: 4000W
- SPL Sensitivity: 89 dB
- Frequency Response: Fs 35 Hz
- Cone Material: Polypropylene / Carbon Fiber / Glass Fiber Composite
- Surround Material: Thermoformed Santoprene Rubber
- Voice Coil: Dual 5 inches on fiberglass former
- Magnet System: Heavy-duty
- Mounting Depth: 10.5 inches
- Cutout Diameter: 15.4 inches
- Xmax: 23 mm
- Sd: 855.3 cm²
- Mms: 484 g
- Vas: 24 Liters
- Qts: 0.38 | Qes: 0.40 | Qms: 6.00
- Le: 0.7 mH | Bl: 17.4 T*m
- Application Type: Enclosure / Marine SPL
- UPC: 814820029024
- Weight: 30
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
