Wet Sounds REVO 12 PSE XWW REVO PSE Series 12" 500W RMS (1000W Peak Power Handling) 4 Ohms, Passive Radiator Marine Subwoofer Enclosure XWW Grille kit
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 12" REVO PSE Series Passive Radiator Marine Subwoofer
- • (2) Hard-mounted clamps
- • (2) Quick-lock clamps
- • 7" Speaker harness
- • 7" RGB harness
- • (8) 40mm screws
- • Owner's Manual
Why Choose Wet Sounds REVO 12 PSE XWW Enclosed Car Subwoofer?
Quick-release Mounts
When you want great sound without the hassle of cutting holes in your interior panels, Wet Sounds' Revo 12 PSE enclosure brings the boom to your boat in a weathertight, easy-to-install package.Quick-release mounts make it easy to find the perfect position for your enclosure, and allow easy removal without tools.
Injection-molded Composite Cone
The Revo 12 PSE enclosure's punch comes courtesy of Wet Sounds' Revo 12 HP subwoofer. This tough, weatherproof sub features a non-rusting Nylas composite frame and stainless-steel terminals that resist corrosion. An injection-molded composite cone lets the Revo 12 HP handle up to 500 watts RMS, so you know you'll get plenty of volume.
Give You Options to Fit the Sub to Your Vessel's Interior Style
The rotomolded enclosure comes pre-wired with weatherproof connections for the speaker leads and optional RGB LED lighting kit (sold separately). The 12" passive radiator gives you the added bass of a ported enclosure, but in a smaller, water-tight package with absolutely no port noise.A variety of grilles give you options to fit the sub to your vessel's interior style.
Frequently Asked Questions (FAQ)
- • What amplifier should I use for this subwoofer?
A 2-ohm stable amplifier delivering around 300 watts RMS is a suitable match. Set the gain correctly to avoid clipping and distortion.
- • Why does the bass sound weak after installation?
Free-air subwoofers need proper front-to-rear air separation for strong bass. Check for air leaks and make sure the mounting area is solid.
- • Can I install it without a subwoofer box?
It is designed for free-air or infinite-baffle installations. Make sure the mounting area provides proper air separation for the best bass response.
- • Why does the subwoofer distort at high volume?
Excessive gain or amplifier clipping can cause distorted bass. Lower the gain and verify that the amplifier is properly matched.
- • What size mounting hole is required?
The required cutout is approximately 9.45 inches. Allow about 4.62 inches of mounting depth for proper clearance.
- • Why is there rattling during heavy bass?
Loose mounting hardware or a flexible mounting surface can create unwanted vibration. Tighten the mounting screws and reinforce the installation area if needed.
- • Why isn't the subwoofer producing sound?
Check the amplifier power, speaker wiring, and signal connections first. Incorrect impedance wiring or loose terminals can also prevent output.
- • Why does the bass change depending on where it is mounted?
Free-air bass performance can change significantly with mounting location and air separation. Try a more rigid location with better front-to-rear isolation.
- • Can I add RGB lighting to the grille?
Compatible RGB lighting can be added with the appropriate lighting kit. Check the lighting connections if the grille lights do not operate properly.
- • Is it suitable for outdoor and marine installations?
It is built with marine-oriented materials for outdoor applications. Proper installation and protection from excessive water exposure can help maintain performance.
- Diameter : 12 Inch
- Sensitivity : 88 dB
- Impedance : 4 Ohm
- Frequency Response : 20-400 Hz
- Peak Power Handling : 1000 Watts
- Enclosure Type : Ported
- RMS Power Handling : 500 Watts
Features:
- Designed for the Water: Enjoy great sound without cutting holes in your interior panels with the Wet Sounds Revo 12 PSE enclosure.
- Marine-Ready Subwoofer: Equipped with the robust Wet Sounds Revo 12 HP subwoofer, delivering powerful, weatherproof audio.
- Durable Construction: Features a non-rusting Nylas composite frame and stainless-steel terminals that resist corrosion.
- High Performance: Injection-molded composite cone handles up to 500 watts RMS for maximum volume.
- Weatherproof Enclosure: Rotomolded and pre-wired with weatherproof connections for speaker leads and optional RGB LED lighting kit (sold separately).
- Enhanced Bass: 12" passive radiator provides the added bass of a ported enclosure without port noise.
- Easy Installation: Quick-release mounts for easy positioning and tool-free removal.
- Customizable Look: Various grilles available to match your vessel's interior style.
Specifications:
- Sealed rotomolded plastic enclosure
- package includes 12" sub, 12" passive radiator, and grilles (assembly required)
- injection-molded composite cone with Santoprene rubber surround
- Nylas composite frame
- quick-release mounts and harness included
- handles up to 500 watts RMS (1000 watts peak)
- sensitivity: 88 dB
- impedance: 4 ohms
- frequency response: 20-400 Hz
- dimensions: 16.5" W x 15.5" H x 16.5" D
- UPC: 814820029031
- Weight: 30
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
