Wet Sounds ICON 8-W FC SS V2 ICON Series 8" 150W RMS (300W Peak Power Handling) 4 Ohms, Coaxial Tower Speakers with Stainless Fixed Clamps (Pair)
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) 8" ICON Series Coaxial Tower Speakers
- • (2) Marine tower speakers (black) with attached 4" wiring
- • (2) Swivel clamp bases with attached 11" wiring
- • (2) Swivel clamp tops
- • (4) M8x60mm hex-socket bolts
- • (4) M8x45mm hex-socket bolts
- • (8) M8x30mm hex-socket bolts
- • (4) Nylon clamp washers
- • (2) Grease packets
- • Owner's Manual
Why Choose Wet Sounds ICON 8-W FC SS V2 Marine Speakers?
Marine Tower Speakers for High-Fidelity Sound
Designed for boats, wakeboarding, and marine environments, these 8-inch ICON Series tower speakers deliver full midbass and crisp, detailed highs. Featuring an 8" continuous cone midbass driver paired with a grille-mounted 1" horn-loaded titanium (HLT) tweeter, they provide full-range, high-fidelity sound with 150W RMS (300W peak) for loud, clear audio on the water.
Durable and Compact Marine Tower Speakers
Built with water-resistant materials, including a composite cone and marine-rated polyurethane surround, these speakers resist moisture, saltwater, and UV exposure. TC3 fixed aluminum clamps provide secure, versatile mounting for tower or boat surfaces, while the compact housing—similar in size to 6.5" speakers—saves space without sacrificing audio performance.
Rugged Marine Tower Speakers with Balanced Sound
Engineered for harsh marine environments, these speakers feature a reinforced composite enclosure and stainless steel hardware for long-lasting durability. The built-in passive crossover ensures smooth, balanced frequency response, while Gloss White or Gloss Black finishes with UV inhibitors maintain a lasting appearance. Sold in pairs, they provide full stereo coverage for your marine tower setup.
Frequently Asked Questions (FAQ)
- • Why does the sound lack midbass after installation?
An incorrectly set high-pass crossover can remove too much low-frequency output. Try setting the crossover around 60–80 Hz and verify the amplifier is properly tuned.
- • Why do the speakers sound distorted at higher volume?
Excessive amplifier gain, bass boost, or insufficient clean power can cause clipping. Reduce the gain and verify the amplifier can provide adequate RMS power.
- • Why does the sound seem too bright or harsh?
The titanium tweeter produces detailed high frequencies that can sound bright when the treble or gain is excessive. Adjust the EQ and amplifier settings for a smoother response.
- • Why is one speaker quieter than the other?
Check the balance control, amplifier channels, speaker polarity, wiring, and connectors. Swapping amplifier channels can help determine whether the issue is with the speaker or installation.
- • Why is there no sound even though the amplifier is turned on?
Inspect the speaker wiring, amplifier output, source selection, and crossover settings. A loose connection or incorrectly configured amplifier channel can interrupt the audio signal.
- • Do I need an amplifier to get good performance?
The speakers are rated at 150 watts RMS and 300 watts peak at 4 ohms. A properly matched marine amplifier can provide substantially more clean output than most factory radios.
- • Why do the speakers rattle when the boat is moving?
Loose mounting hardware, clamps, grilles, or wiring can create vibration noises. Check all mounting points and make sure the speakers are firmly secured to the tower.
- • Why do the speakers move when the boat hits rough water?
Improperly tightened mounting clamps can allow movement under vibration. Confirm the selected clamp matches the tower diameter and tighten the hardware according to the installation instructions.
- • Can I use the fixed clamp on a different tower size?
The available fixed-clamp configurations support specific tower diameters. Measure your tower before ordering and select the clamp that matches the mounting tube.
- • Why does the sound change when I adjust the speaker position?
Placement and aiming affect how the sound reaches passengers and riders. Swivel mounting can be useful when the tower angle requires the speakers to be redirected toward the listening area.
- Diameter : 8 Inch
- Sensitivity : 92 dB
- Impedance : 4 Ohm
- Frequency Response : 20-20000 Hz
- RMS Power Range : 150 Watts
- Peak Power Handling : 300 Watts
- Design : 2 Way
- Color : White
- Shallow Mount : No Inch
- RMS Power Handling : 150 Watts
Features:
- 8-inch ICON Series Marine Tower Speakers: Engineered for full midbass and clean, detailed highs on boats, wakeboarding, and marine environments.
- Two-Way Driver Design: 8" continuous cone midbass driver paired with a grille-mounted 1" horn-loaded titanium (HLT) tweeter for full-range, high-fidelity sound.
- High-Power Performance: 150W RMS per speaker (300W peak) delivers loud, clear audio in marine conditions.
- Water-Resistant Materials: Composite cone with marine-rated polyurethane surround protects against moisture, saltwater, and UV exposure.
- TC3 Fixed Aluminum Clamps: Provides secure and durable mounting for tower or boat surfaces with multiple universal clamp configurations.
- Compact Form Factor: Smaller housing size similar to 6.5" speakers for space-saving installation without compromising audio performance.
- Rugged Marine Construction: Reinforced composite enclosure with stainless steel hardware ensures long-lasting durability in harsh marine environments.
- Crossover Network: Built-in passive crossover delivers smooth, balanced frequency response across drivers.
- Available Colors: Gloss White or Gloss Black with UV inhibitors for long-lasting appearance.
- Sold in Pairs: Each package includes two tower speakers for full stereo coverage.
Specifications:
- Series: ICON
- Speaker Size: 8-inch coaxial tower speaker
- Tweeter Size: 1" Horn-Loaded Titanium (HLT)
- Woofer Material: Composite Cone
- Woofer Surround: Marine-rated Polyurethane
- Impedance: 4Ω
- Power Handling (RMS/Peak): 150W RMS / 300W Peak per speaker
- Frequency Response: 20Hz – 20kHz
- Sensitivity: 92 dB @ 1W/1m
- Mounting Type: TC3 fixed aluminum clamps
- Front-to-Back Depth: 11.5" (292.1 mm)
- Hang Height: 9.56" (242.88 mm)
- Width: 8.75" (222.25 mm)
- Enclosure Material: Reinforced Composite
- Hardware: Stainless Steel
- Colors: Gloss White or Gloss Black with UV inhibitors
- Waterproof: Yes, marine-rated
- Included Components: ICON 8-W FC SS V2 pair with fixed clamps
- UPC: 814820023664
- Weight: 20
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
