Wet Sounds VS-69 PRO-B Venue Series 6"x9" 150W RMS (300W Peak Power Handling) 4 Ohm, Black HLCD Outdoor Speaker (Sold as each)
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 6"x9" 70V Outdoor Speaker (Black) w/attached 16" Bare-Ended Speaker Wire
- • Mounting Bracket
- • (8) 1/2" Screws
- • Owner's Manual
Why Choose Wet Sounds VS-69 PRO-B Home Theater Speaker?
Wide Frequency Range and Exceptional Clarity
With 150 watts of RMS power and up to 300 watts peak, this speaker delivers a wide frequency range from 20Hz to 20KHz and exceptional clarity with a sensitivity of 92dB @ 1W/1 meter. Its compact size—8.4" tall, 11.67" wide, and 10.08" deep—makes it a powerful addition to any audio setup. Discover high-performance sound that fits perfectly into your space!
Advanced HLCD Technology and Versatile Installation Options
Experience top-tier sound with Wet Sounds' advanced Horn Loaded Compression Driver (HLCD) technology, combined with a reinforced mid-bass driver for crystal-clear, durable performance. With adjustable power settings ranging from 10W to 80W and versatile installation options—including an optional landscape spike—this speaker is perfect for any setup, whether on the surface or in your landscape. Upgrade your audio experience today!
Exceptional Sound Coverage and Durability for Any Landscape
Enjoy exceptional sound coverage in any landscape with this speaker, featuring a weatherproof enclosure for lasting durability in all conditions. Its enhanced bass response, thanks to Wet Sounds’ Reaction Technology and a single aluminum passive radiator, delivers powerful audio. Available individually, it's the perfect choice for your outdoor audio needs.
Frequently Asked Questions (FAQ)
- • Why do the speakers sound distorted at higher volume?
Check amplifier gain, source volume, and equalizer settings. Excessive levels can cause clipping and distortion. Lower the gain or volume, then gradually increase them for clean output.
- • Why is there little or no bass from the speakers?
Check speaker polarity, amplifier settings, and crossover configuration. Reversed polarity can reduce bass output, while incorrect crossover settings may limit low-frequency performance.
- • Why do I hear buzzing or humming from the speakers?
Buzzing or humming can result from grounding problems, interference, or poorly routed cables. Check amplifier grounding, signal connections, and cable routing away from power sources.
- • Why does the sound become harsh when I increase the volume?
Harsh sound can indicate clipping, excessive treble, or an amplifier exceeding its clean output range. Reduce gain and equalizer levels, then increase volume gradually.
- • What amplifier should I use with these speakers?
Choose an amplifier matching the speakers' impedance and recommended power range. Verify its continuous RMS output before installation instead of relying solely on maximum wattage.
- • Why do the speakers stop playing at high volume?
Check whether the amplifier is overheating, clipping, or entering protection mode. Also inspect speaker impedance and wiring for shorts. Proper ventilation can prevent interruptions.
- • Can incorrect speaker wiring affect the soundstage?
Yes. Incorrect polarity can cause phase cancellation, resulting in weak bass and poor imaging. Verify positive and negative terminals are connected consistently on both channels.
- • Why does the sound change after moving the speakers?
Speaker placement affects reflections, imaging, and bass response. Position speakers symmetrically and adjust their distance from walls or corners for balanced sound.
- • Why do I hear rattling or buzzing from the cabinet?
Check the mounting hardware, grille, and nearby surfaces for looseness. A vibrating object or unsecured component can create unwanted noise during bass-heavy music.
- • Why does the soundstage seem unbalanced from my listening position?
Check speaker placement, toe-in angle, listening position, and room reflections. Small placement changes can improve imaging and create a more centered, balanced soundstage.
- Diameter : 6x9 Inch
- Frequency Response : 20-20000 Hz
- RMS Power Range : 150 Watts
- Peak Power Handling : 300 Watts
- Color : Black
Features:
- Advanced Audio Technology: Utilizes Wet Sounds' Horn Loaded Compression Driver (HLCD) technology for premium sound performance.
- Durable Mid-Bass Driver: Reinforced composite mid-bass driver for enhanced sound clarity and long-lasting durability.
- Adjustable Power Settings: Features 4Ω and 70v adjustable tap settings, with 10W, 20W, 40W, and 80W options.
- Flexible Installation Options: Developed for surface or landscape installation, with an optional landscape spike for easy setup.
- Wide Coverage Area: Designed to provide excellent sound coverage in landscape applications.
- Weatherproof Enclosure: Built for outdoor use, ensuring durability in all weather conditions.
- Enhanced Bass Response: Features Wet Sounds’ Reaction Technology with a single aluminum passive radiator for superior bass.
- Sold Individually: Available for purchase as a single unit.
Specifications:
- RMS Power: 150W
- Peak Power: 300W
- Frequency Response: 20Hz - 20KHz
- Sensitivity: 92dB @ 1W/1 meter
- Impedance: 4 Ohms
- Height: 8.4"
- Width: 11.67"
- Depth: 10.08"
- UPC: 810042170209
- Weight: 13
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
