Wet Sounds VS-Amplifier System-4 Venue Series 4-Channel 300W RMS x 4 at 2 Ohms, Outdoor Amplifier with VS-LS-ENC Enclosure
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- VS-1200-AMP
- • 4-Channel Amplifier w/attached 9" Speaker Output Cables (terminated in watertight connectors) and 15" AC power cord (IEC 3-pin)
- • (4) 9" Speaker Harnesses (watertight connectors on one end / bare-ended wire on other end)
- • Owner's Manual
- VS-LS-ENC
- • Landscape Amplifier Enclosure w/attached 29" AC Power Cord (IEC 3-pin
- • 19" 3.5mm TRS Cable (male on both ends)
- • (4) Mounting Tabs
- • (4) 5mm Screws
- • (4) 12mm Screws
- • Quickstart Guide
Why Choose Wet Sounds VS-Amplifier System-4 Home Theater Amplifier?
Pure Outdoor Audio Power
pecifically engineered to drive Wet Sounds Venue Series outdoor speakers, this commercial-grade power plant delivers a massive 4 x 300 Watts RMS at 2 Ohms (4 x 200W RMS at 4 Ohms) across a wide 5 Hz to 20 kHz frequency response. Running off a standard 110V wall outlet, it features preset gain controls and a selectable 100 Hz low-pass filter so you can easily dial in crystal-clear audio and deep bass for backyard parties or venue spaces.
Stealth All-Weather Protection
Built to survive harsh outdoor environments, the included VS-LS-ENC enclosure keeps your gear completely protected from rain, dirt, and extreme heat. Inside, a thermo-switched cooling fan kicks on at 100°F to prevent overheating during long, sun-drenched listening sessions. Equipped with a heavy-duty external 110V power cord and internal outlets, this stealthy landscape cabinet drops right into your outdoor setup for a clean, professional finish.
Smart Streaming Made Simple
Taking full control of your outdoor playlist has never been easier. Designed with dedicated internal space and power, the system seamlessly accommodates plug-and-play media centers like the Sonos Port (sold separately) for effortless wireless streaming from your smartphone. Combined with watertight quick-connect speaker terminals for fast wiring, setting up a high-performance outdoor audio system is completely hassle-free.
Frequently Asked Questions (FAQ)
- • How do I turn the amplifier on?
Connect it to 110V AC power and a compatible source with a turn-on trigger. The system requires a trigger signal before the amplifier can activate properly.
- • What should I check when there is no audio?
Check the source, RCA connections, speaker wiring, gain settings, and power connection. Make sure the source provides a signal and all quick-connect terminals are secure.
- • How can I improve the volume from my outdoor speakers?
Check the gain setting, source output, speaker impedance, and wiring. The system supports up to 300 watts per channel at 2 ohms.
- • What should I do if the amplifier enters protection mode?
Check the speaker wiring, connections, ventilation, and operating load. Loose wires, excessive heat, or an impedance issue can trigger protection and interrupt output.
- • How should I set the gain controls?
Start with the gain at a low setting, increase the source volume, then gradually raise gain until the desired output is reached without audible distortion.
- • Which settings are best for a subwoofer?
Use the selectable low-pass setting when powering a subwoofer. Adjust the filter and gain according to the subwoofer's specifications for balanced low-frequency performance.
- • Can I connect 2-ohm speakers?
Yes. The system supports loads down to 2 ohms. Confirm the combined speaker impedance before connecting multiple speakers to prevent excessive load on each channel.
- • Why is there humming or unwanted noise?
Check RCA connections, grounding, and cable routing. Keep signal cables separated from power wiring and secure all connections to reduce electrical interference.
- • Is it normal for the cooling fan to run?
Yes. The enclosure includes a cooling fan for thermal management. Keep ventilation openings unobstructed so heat can dissipate properly during extended operation.
- • Can this system be used for outdoor installations?
Yes. It is designed for permanent outdoor and landscape audio installations. Use the included weather-resistant enclosure and keep all connections properly secured.
Features:
- Designed for Venue Series™: Specifically engineered to power Wet Sounds Venue Series™ products.
- Power Source: Operates using a standard 110v power source.
- Gain Controls: Features preset selectable gain controls for customized sound.
- Low Pass Filter: Includes a selectable low pass filter for optimized audio performance.
- Wiring: Fast and easy speaker wiring with watertight quick connectors.
- VS-LS-ENC Enclosure: Purpose-built landscape enclosure designed to house the VS-1200-AMP.
- Media Center Compatibility: Accommodates plug and play media centers, such as the Sonos Port (not included), for outdoor use.
- Cooling Fan: Includes a cooling fan to maintain optimal performance.
- Power Outlets: Equipped with internal 110v power outlets for convenient connections.
- External Power Cord: Comes with an external 110v cord for easy installation in harsh outdoor environments.
Specifications:
- Power RMS @ 2 Ohm: 4 x 300W
- Power RMS @ 4 Ohm: 4 x 200W
- Frequency Response: 5Hz - 20kHz
- Low Pass Filter: 100Hz
- Operating Voltage: 90VAC - 240VAC
- Signal-to-Noise Ratio (SNR): 88dB
- Input Sensitivity: 0.2 - 2V
- Current Draw (Music): 5A @ 110V
- Current Draw (Max): 18A @ 90V
- Total Efficiency: 77%
- Damping Factor: 200
- Minimum Impedance: 2 Ohm
- Enclosure Input Voltage: 110VAC
- Fan Thermo-Switch: 100°F
- UPC: 810042171282
- Weight: 7
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.