Wet Sounds REV 410 W-SC V2 Revolution Series Dual 10" 800W Peak Power Handling 4 Ohms, Wakeboard Marine Tower Speaker White with TC3 Swivel Clamps For Tube Diameter 1 7/8” To 3”
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 10" Revolution Series Dual Wakeboard Marine Tower Speaker
- • Owner's Manual
Why Choose Wet Sounds REV 410 W-SC V2 Marine Speakers?
Dominate the Wake with REV TEC Power
Experience Wet Sounds’ REV TEC long-range technology, delivering extreme volume and full-range clarity on- and off-axis, projecting powerful sound 80 feet and beyond without losing detail. Featuring a dual 10-inch HLCD tower design and high-output titanium horn compression driver, this system produces punchy mid-bass and crystal-clear highs, ensuring riders hear every note clearly—even outside the wake or over wind, water, and engine noise.
Rugged Sound That Lasts on Every Wake
Engineered for powerful, smooth mid-bass response both near the boat and across long wake ranges, these speakers deliver impressive audio performance in any marine setting. Built with a reinforced composite enclosure and all-stainless-steel hardware and grilles, they resist corrosion and withstand harsh freshwater and saltwater conditions while handling high-output sound with ease.
Versatile, Professional-Grade Tower Mounting
The TC3 swivel clamp system features patented full-rotation clamps, True Disconnect single-bolt quick release, and integrated wiring for clean, hassle-free tower installations. Compatible with X Mount, Fixed Clamp, or Swivel Clamp setups, these premium American wake speakers deliver maximum volume, crystal-clear clarity, and rugged durability for lakes, rivers, and coastal adventures.
Frequently Asked Questions (FAQ)
- • What amplifier should I use with these tower speakers?
A marine amplifier capable of delivering 400 watts RMS at 4 ohms is recommended. Proper gain settings help prevent clipping and distortion.
- • Why does the sound distort when I turn up the volume?
Amplifier clipping or excessive gain can distort at high volume. Check the gain, source level, and speaker wiring before increasing volume.
- • Why don't the speakers sound as loud as expected?
Insufficient amplifier power or incorrect gain settings can limit output. Check the amplifier rating, power supply, and speaker connections.
- • Will the swivel clamps fit my wakeboard tower?
The TC3-SC swivel clamps fit tower tubing from 1-7/8 to 3 inches. Measure your tower tubing before installation to confirm compatibility.
- • Why is one speaker louder than the other?
Unequal amplifier gain, incorrect polarity, or loose wiring can cause an imbalance. Check both channels and speaker connections carefully.
- • Why do I hear rattling from the tower speaker?
Loose clamps, mounting hardware, or tower vibration can create unwanted rattling. Tighten the mounting points and check nearby hardware.
- • Can these speakers handle long periods of high-volume playback?
They are rated at 400 watts RMS for high-output marine applications. Proper amplifier matching and gain settings help prevent excessive heat and distortion.
- • Why does the bass sound weak compared with the highs?
Incorrect crossover settings can reduce the available midbass response. Adjust the amplifier crossover for a more balanced sound.
- • Is the size and weight difficult to handle during installation?
Each enclosure weighs about 36.2 pounds and is 28.5 inches wide. Use proper mounting hardware and have adequate support during installation.
- • Why does the sound change when I move farther from the boat?
Placement, tower orientation, wind, and listening position can affect perceived sound at distance. These speakers are designed for long-range projection while maintaining clarity.
- Diameter : 10 Inch
- Sensitivity : 92 dB
- Impedance : 4 Ohm
- Frequency Response : 20-20000 Hz
- Peak Power Handling : 800 Watts
- Color : White
- RMS Power Handling : 400 Watts
Features:
- REV TEC Long-Range Technology: Uses Wet Sounds’ proprietary REV TEC design to deliver extreme volume and full-range clarity on-axis and off-axis, projecting powerful sound clearly at 80 feet and beyond without loss of detail.
- Wake-Optimized Sound Performance: Allows riders to enjoy clean, detailed audio even while riding outside the wake or nearly parallel to the boat, making it ideal for serious wakeboarding and watersports.
- Dual 10" HLCD Tower Design: Features dual 10-inch mid-bass drivers paired with a high-output horn-loaded compression driver to produce strong mid-bass punch and crystal-clear highs at any volume level.
- Titanium Compression Driver: Uses a separate titanium diaphragm horn-loaded compression driver for sharp, detailed highs that cut through wind, water, and engine noise.
- Advanced Mid-Bass Response: Engineered to maintain smooth frequency response and enhanced mid-bass impact at both near-field listening and long wake range distances.
- Reinforced Composite Enclosure: Built with a rugged composite enclosure designed to handle harsh marine environments, vibration, and high-output performance.
- All Stainless Steel Construction: Equipped with stainless steel hardware and stainless steel grilles for long-term corrosion resistance in freshwater and saltwater conditions.
- TC3 Swivel Clamp System: Includes patented TC3 swivel clamps with full rotational capability, True Disconnect single-bolt quick release, and integrated wiring for clean, professional tower installations.
- Multiple Mounting Options: Compatible with X Mount, Fixed Clamp, or Swivel Clamp systems to fit a wide range of wakeboard towers, including cast and tubular designs.
- Premium American Wake Audio: Designed for boat owners who demand maximum volume, clarity, and durability—perfect for U.S. lakes, rivers, and coastal riding environments.
Specifications:
- Series: Wet Sounds Revolution Series
- Speaker Type: Wakeboard Tower Speaker
- Configuration: Dual 10" HLCD Tower Speaker
- Mid-Bass Drivers: Dual 10-inch HLCD
- High Frequency Driver: Titanium Diaphragm High-Output Horn-Loaded Compression Driver
- Power Handling (RMS): 400 watts
- Power Handling (Peak): 800 watts
- Impedance: 4 ohms
- Frequency Response: 20 Hz – 20 kHz
- Sensitivity: 92 dB (1W / 1m)
- Mount Type: TC3 Swivel Clamp
- Clamp Spacing: 9.25 inches (center to center)
- Hang Height: 11 inches (279.40 mm)
- Height: 11 inches (279.40 mm)
- Width: 28.5 inches (729.90 mm)
- Depth: 20.5 inches (520.70 mm)
- Hang Weight: 36.2 lbs
- UPC: 814820023831
- Weight: 30
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
