Wet Sounds REV 10 W-SC V2 Revolution Series 10" 300W RMS (600W Peak Power Handling) 4 Ohms, Marine Tower Speakers - White (Pair)
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) 10" Revolution Series Marine Tower Speakers
- • Upper mounting bracket w/ built-in connector
- • Lower mounting bracket
- • (2) Rubber covers
- • (4) 60mm bolts
- • (4) 45mm bolts
- • (8) 30mm bolts
- • (4) Nylon clamp washers w/ instructions
- • (2) Packets anti-seize compound
- • Owner's Manual
Why Choose Wet Sounds REV 10 W-SC V2 Marine Speakers?
Full-Range Power and Durability
The REV 10 delivers high-quality, full-range sound on and off axis, ensuring every note is heard clearly even at long distances while riding. With a frequency response of 20Hz–20kHz and power handling of 300W RMS (600W peak), its Kevlar-reinforced EFG cone and polyurethane surround provide exceptional strength and durability for extreme marine and powersports conditions.
Crisp Highs and Hassle-Free Installation
The REV 10 features a Pro-Axial coaxially mounted titanium diaphragm horn-loaded compression driver, delivering sharp, high-output highs with exceptional clarity. Installation is quick and easy with included hardware and instructions, and the speaker is compatible with most audio systems and amplifiers, supporting series or parallel wiring for optimal impedance matching.
Customizable Lighting and Adjustable Mounting
The REV 10 offers optional LED upgrades with Wet Sounds LED KIT REV10-RGB light rings (sold separately) for a vibrant, customizable look. Swiveling stainless steel clamps provide secure and adjustable mounting, while proprietary REV TEC technology delivers impressive volume and full-range sound quality both on- and off-axis.
Frequently Asked Questions (FAQ)
- • Why is there no sound after installation?
Check speaker wiring, amplifier output, source settings, and connections. Confirm positive and negative terminals are connected correctly and the amplifier receives adequate power.
- • Why does the sound become distorted at higher volume?
Check amplifier gain, source volume, and equalizer settings. Excessive gain can cause clipping. Lower the gain and gradually increase volume for cleaner playback.
- • Why is the bass weaker than expected?
Check speaker polarity, amplifier settings, and crossover configuration. Reversed polarity can cause phase cancellation and reduce bass response.
- • Why does one speaker sound quieter than the other?
Check amplifier channels, speaker wiring, balance settings, and connections. A loose terminal or damaged wire can reduce output from one speaker.
- • Why does the speaker rattle during bass-heavy music?
Check mounting hardware, grille, and mounting surface for looseness. Tighten hardware securely and ensure the speaker is mounted firmly.
- • Why does the sound become harsh at high volume?
Harsh audio can result from excessive gain, clipping, or equalizer settings. Reduce amplifier gain and treble levels, then gradually increase volume.
- • What amplifier should I use with these speakers?
Use an amplifier matching the speakers' impedance and recommended RMS power. Avoid exceeding their continuous rating and verify amplifier output before installation.
- • Why does the sound change when I move the speakers?
Speaker positioning affects sound dispersion and bass response. Mount speakers securely and adjust their orientation toward the listening area for consistent coverage.
- • Can these speakers handle wet and marine conditions?
Yes. They are designed for marine environments, but proper installation and maintenance remain important. Keep connections secure and rinse saltwater residue after use.
- • Why does the speaker stop working after getting wet?
Inspect the wiring, connectors, and amplifier for moisture or corrosion. Allow components to dry completely, then check connections before powering the system again.
- Diameter : 10 Inch
- Sensitivity : 92 dB
- Impedance : 4 Ohm
- Frequency Response : 20-20000 Hz
- Peak Power Handling : 800 Watts
- Color : White
- RMS Power Handling : 400 Watts
Features:
- High-Quality Sound: Delivers full-range sound on and off axis at long distances while riding.
- Frequency Response: 20Hz – 20kHz for accurate lows, mids, and highs.
- Power Handling: Handles up to 300 watts RMS per speaker (600 watts peak).
- Durable Construction: Kevlar-reinforced EFG cone with polyurethane surround ensures strength and durability in extreme conditions.
- High Frequency: Pro-Axial driver – coaxially mounted titanium diaphragm high-output horn-loaded compression driver.
- Easy Installation: Comes with all necessary mounting hardware and instructions for quick, hassle-free installation.
- Compatibility: Compatible with most audio systems and amplifiers; supports series or parallel wiring for impedance matching.
- Optional LED Upgrade: Compatible with Wet Sounds LED KIT REV10-RGB light rings (sold separately).
- Swiveling Stainless Steel Clamps: Ensures secure and adjustable mounting.
- REV TEC Technology: Provides remarkable volume and full-range sound quality both on and off axis.
Specification:
- Speaker Type: Outdoor / Marine Tower
- Design: 2-way coaxial
- Color: White
- Unit Count: 1 speaker per unit
- Mounting Type: Swivel Clamp
- Frequency Response: 20Hz – 20kHz
- Peak Power: 600 watts per speaker
- RMS Power: 300 watts per speaker
- Tweeter: 1" Titanium Horn
- Woofer: Kevlar-Reinforced EFG cone
- Impedance: 4 ohms
- Sensitivity: 92 dB
- Woofer Surround: Polyurethane
- Tweeter: 1" Titanium Horn
- Impedance: 4 ohms
- Sensitivity: 92 dB
- Enclosure: Reinforced composite gloss white
- Minimum Pole Mounting Diameter: 1-7/8"
- Maximum Pole Mounting Diameter: 3"
- Mounting Brackets Included: Yes
- UPC: 814820023770
- Weight: 10
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
