Wet Sounds ZERO 10 S4 XZ-W ZERO Series 10" 300W RMS (600W Peak Power Handling) 4 Ohms, Marine Subwoofer with White XZ Grille
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 10" ZERO Series Marine Subwoofer
- • (6) 1-1/2" Stainless steel screws
- • Grille
- • Template
- • Owner's Manual
Why Choose Wet Sounds ZERO 10 S4 XZ-W Marine Subwoofer?
Rugged Marine-Ready Bass in a Compact Design
Tested to endure the toughest marine environments, this subwoofer meets ASTM B117 salt/fog and ASTM G154 UV standards and carries an IP65 waterproof rating. Its shallow-mount design delivers high-output, deep bass in small, sealed enclosures, while the durable Nylas composite basket (nylon and fiberglass) provides superior strength and long-lasting stability for boats, UTVs, and outdoor vehicles.
Precision Bass with Rugged Durability
The rigid PMGS composite cone delivers accurate, low-distortion sound even at high power levels, while the TPR suspension system surround ensures smooth cone movement and long-lasting durability against harsh environmental conditions.
Compact Bass with Precision Control
The reinforced Conex fiber spider ensures precise cone control and long-term reliability, even in extreme conditions. Featuring a twist-lock XZ grille for flexible OEM or custom installation, this subwoofer is optimized for a 0.5cuft sealed enclosure to deliver maximum bass in tight spaces.
Frequently Asked Questions (FAQ)
- • What amplifier should I use with this subwoofer?
A 4-ohm amplifier delivering around 300 watts RMS is a suitable match. Make sure the amplifier is stable at 4 ohms for reliable performance.
- • Why does the bass sound weak after installation?
Incorrect enclosure size, gain settings, or wiring can reduce bass output. Use the recommended 0.5 cubic-foot sealed enclosure and check the amplifier settings.
- • Why does the bass distort at high volume?
Excessive gain or amplifier clipping can distort at higher volume levels. Reduce the gain and make sure the amplifier provides clean power.
- • Why isn't the subwoofer producing any sound?
Check the amplifier power, audio signal, fuse, and speaker wiring. Also verify that the waterproof connector is fully seated and the 4-ohm load is connected correctly.
- • Why does the enclosure rattle during heavy bass?
Loose mounting hardware or panels can create unwanted vibrations during bass-heavy playback. Tighten the mounting screws and check nearby surfaces for loose parts.
- • Will it fit in a shallow installation space?
The mounting depth is only 3.57 inches, making it suitable for many tight installations. The required cutout diameter is 9.24 inches, so measure the mounting area before cutting.
- • What size sealed enclosure should I use?
The recommended sealed enclosure volume is 0.5 cubic feet. Using the correct air volume helps the subwoofer produce controlled bass.
- • Why is the bass different after changing the enclosure?
Enclosure volume directly affects the subwoofer's bass response and control. Keep the enclosure close to the recommended 0.5 cubic feet for the intended performance.
- • Why is the grille difficult to install?
The twist-lock grille must be positioned correctly before it can lock into place. Align the tabs, apply downward pressure, and twist the grille clockwise.
- • Can it handle marine and outdoor conditions?
The construction is designed for demanding marine, powersports, and outdoor environments. Proper installation and regular inspection can help maintain long-term performance.
- Diameter : 10 Inch
- Sensitivity : 84.5 dB
- Impedance : 4 Ohm
- Frequency Response : 30-2000 Hz
- RMS Power Range : 300 Watts
- Peak Power Handling : 600 Watts
- Color : White
- Mounting Depth : 3.57 Inches
Features:
- Marine Tested: Built to withstand harsh marine environments with ASTM B117 salt/fog and ASTM G154 UV testing, plus an IP65 waterproof rating.
- Shallow Mount Design: Engineered for high-output performance in small, sealed enclosures, delivering deep bass without taking up too much space.
- Durable Nylas Basket: The frame uses a Nylas composite of nylon and fiberglass for superior strength and long-lasting stability.
- Rigid PMGS Composite Cone: Provides precise sound reproduction with low distortion, even under high power conditions.
- TPR Suspension System Surround: Ensures optimal cone movement and durability against environmental exposure.
- Reinforced Conex Fiber Spider: Maintains precise control and long-term reliability in extreme conditions.
- Versatile Installation: Comes with a twist-lock XZ grille that can be used or removed for custom or OEM applications.
- Optimized Enclosure Size: Recommended for a 0.5 cubic foot sealed box, delivering maximum bass in compact spaces.
Specifications:
- Speaker Size: 10 inches
- Impedance: 4 ohms
- RMS Power Handling: 300 watts
- Peak Power Handling: 600 watts
- Frequency Response: 30 Hz – 2 kHz
- Sensitivity: 84.2 dB at 1W/1m
- Xmax: 8.2 mm
- Mounting Depth: 3.57” (3-9/16”)
- Cutout Diameter: 9.24” (9-1/4”)
- Cone Material: Polypropylene/Mica/Glass Spheres
- Surround Material: Santoprene Rubber
- Basket Material: Nylas composite
- Magnet Type: Single stacked ferrite
- Voice Coil: Single
- Recommended Enclosure Volume: 0.5 cubic feet sealed
- UPC: 810042173026
- Weight: 10
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
