Wet Sounds REV 10 HD-W Revolution HD Series 10" 300W RMS (600 Peak Power Handling) 4 Ohms, Tower Speakers Horn Loaded Compression Driver (HDLC) - White (Pair)
The item above doesn't contains grilles. here are some alternative products with grilles
REV 10 HD-W XZ
Revolution HD Series 10"
300W RMS (600W Peak Power Handling)
XZ-W GRILLE INCLUDED
REV 10 HD-W XW
Revolution HD Series 10"
300W RMS (600W Peak Power Handling)
XW-W GRILLE INCLUDED
REV 10 HD-W XS
Revolution HD Series 10"
300W RMS (600W Peak Power Handling)
XS-W GRILLE INCLUDED
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) 10" Revolution HD Series Tower Speakers
- • (2) 10" marine tower speakers (white) w/ attached 4" speaker harness and 9" RGB harness
- • (2) 10" XS-W tower speaker grilles
- • (8) 12mm hex-head screws
- • Owner's Manual
Why Choose Wet Sounds REV 10 HD-W Marine Speakers?
Mid-bass Performance
These 10” Wet Sounds Revolution HD Series speakers are made to rock your boat, with exclusive REV TEC driver technology that produces stunning mid-bass performance and smooth, powerful high-frequency response. The 10" woofer's reinforced cone and polyurethane surround provide outstanding strength and durability, even when you play ‘em loud.
Music Over the Wake and Waves
hese speakers will handle up to 300 watts RMS (600 peak), so you'll definitely hear your music over the wake and waves. Not only does the sound go a long way with these speakers; it also goes where it's needed. Everyone on board will keep rockin', while skiers and waterboarders will be able to hear the music even when outside the wake and almost parallel to the boat.
Integrated Front and Rear RGB LED Light
The reinforced composite enclosure looks great and stands up to wind and weather. The integrated front and rear RGB LED light rings add a stylish touch, and you have three grille options to choose from You'll also need Wet Sounds X-mount adapters or swivel clamps (each sold separately) to mount your speakers.
Frequently Asked Questions (FAQ)
- • Why is there no sound after installation?
Check speaker wiring, amplifier output, source settings, and connections. Confirm positive and negative terminals are connected correctly and the amplifier receives adequate power.
- • Why does the sound become distorted at higher volume?
Check amplifier gain, source volume, and equalizer settings. Excessive gain can cause clipping. Lower the gain and gradually increase volume for cleaner playback.
- • Why is the bass weaker than expected?
Check speaker polarity, amplifier settings, and crossover configuration. Reversed polarity can cause phase cancellation and reduce bass response.
- • Why does one speaker sound quieter than the other?
Check amplifier channels, speaker wiring, balance settings, and connections. A loose terminal or damaged wire can reduce output from one speaker.
- • Why does the speaker rattle during bass-heavy music?
Check mounting hardware, grille, and mounting surface for looseness. Tighten hardware securely and ensure the speaker is mounted firmly.
- • Why does the speaker sound harsh or overly bright?
Check treble, equalizer, and amplifier settings. Excessive high-frequency boost can make playback sound harsh. Reduce treble gradually until the sound becomes balanced.
- • What amplifier should I use with these speakers?
Use an amplifier matching the speakers' impedance and recommended RMS power. Avoid exceeding their continuous rating and verify amplifier output before installation.
- • Why does the sound change when I move the speakers?
Speaker positioning affects sound dispersion and bass response. Mount speakers securely and adjust their orientation toward the listening area for consistent coverage.
- • Can these speakers handle wet and marine conditions?
Yes. They are designed for marine environments, but proper installation and maintenance remain important. Keep connections secure and rinse saltwater residue after use.
- • Why does the speaker stop working after getting wet?
Inspect the wiring, connectors, and amplifier for moisture or corrosion. Allow components to dry completely, then check connections before powering the system again.
- Diameter : 10 Inch
- Sensitivity : 90.9 dB
- Impedance : 4 Ohm
- Frequency Response : 66-20000 Hz
- Peak Power Handling : 600 Watts
- Color : White
- RMS Power Handling : 300 Watts
Features:
- High-Performance REV TEC Technology: Delivers incredible volume and full-range clarity both on-axis and off-axis, projecting sound up to 80 feet and keeping riders fully immersed behind the boat.
- 10" Advanced Polymer Composite Woofers: Kevlar-reinforced design with Santoprene rubber surrounds ensures strong mid-bass response and long-lasting durability in marine environments.
- Titanium HLCD Compression Drivers: Coaxially mounted horn-loaded drivers provide crisp, clean highs that cut through wind, engine noise, and open-water conditions for exceptional clarity.
- RGB LED Light Rings: Integrated front and rear LED light rings allow for customizable accent lighting in multiple colors, making your boat look as good as it sounds.
- Durable Marine Enclosure: Rugged, reinforced composite enclosure with ASTM-D4587 UV resistance and ASTM-B117 salt-spray resistance protects your investment from sun and saltwater damage.
- Passive Crossover Network: Professionally tuned passive crossover ensures smooth, balanced audio performance across all frequencies.
- Customizable Grille Options: Includes a pair of XS-style grilles and allows additional choices for style and color to match your boat.
- Designed for Wakeboard Towers: Ideal for high-performance marine audio setups; X-Mount adapters or swivel clamps are required for installation (sold separately).
- Engineered for Outdoor Performance: Speakers are built to handle the toughest marine conditions while maintaining premium audio quality at high volumes.
Specifications:
- Brand: Wet Sounds
- Series: REV 10 HD
- Speaker Type: Wakeboard Tower Speaker
- Configuration: 10" 2-Way Coaxial Tower Speakers (Pair)
- Tweeter Composition: Titanium HLCD Horn
- Woofer Composition: Advanced Polymer Composite
- Woofer Surround: Santoprene Rubber
- Power Handling (RMS): 300 Watts Each
- Peak Power Handling: 600 Watts Each
- Impedance: 4 Ohms
- Sensitivity: 90.9 dB @ 1W / 1M
- Frequency Response: 66 Hz – 20 kHz
- Integrated LED: Front and rear RGB light rings (4-pin Molex connection)
- Enclosure Material: Reinforced Composite
- Grille Style: XS-style (pair included)
- Mounting: X-Mount or Swivel Clamps Required (sold separately)
- Dimensions: 32"D x 23"W x 14"H
- Hang Weight: 14.33 lbs each
- Water Resistance: Rugged marine rated (UV & salt-spray tested)
- UPC: 810042172548
- Weight: 13
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
