Wet Sounds REV 12 HD-B Revolution HD Series 12" 400W RMS (800 Peak Power Handling) 4 Ohms, Wakeboard Tower Speakers Horn Loaded Compression Driver (HDLC) - Black (Pair)
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) 12" Revolution HD Series Wakeboard Tower Speakers
- • (2) 12" black marine tower speakers with 4" speaker harness and 9" RGB harness.
- • (2) 12" Grilles (black)
- • (8) 1/2" Allen head screws (3mm
- • Owner's Manual
Why Choose Wet Sounds REV 12 HD-B Marine Speakers?
Powerful High Frequency Response
These 12” Wet Sounds Revolution HD Series speakers are the company's largest and loudest tower speakers yet, with exclusive REV TEC driver technology that produces stunning mid-bass performance and smooth, powerful high frequency response. These thundering Rev 12 HD speakers are designed with high-performance boating in mind. The 12" woofer's reinforced cone and polyurethane surround provide outstanding strength and durability, even when you play ‘em loud.
Music Over the Wake and Waves
These speakers will handle up to 400 watts RMS (800 peak), so you'll definitely hear your music over the wake and waves. Not only does the sound go a long way with these speakers; it also goes where it's needed. Everyone on board will keep rockin', while skiers and waterboarders will be able to hear the music even when outside the wake and almost parallel to the boat.
Integrated Front and Rear RGB LED Light
he reinforced composite enclosure looks great and stands up to wind and weather. The integrated front and rear RGB LED light rings add a stylish touch. With three grille options to choose from, you can pick the one that'll look best on your boat. You'll also need Wet Sounds X-mount adapters or swivel clamps (each sold separately) to mount your speakers.
Frequently Asked Questions (FAQ)
- • Why is there no sound after installation?
Check speaker wiring, amplifier output, source settings, and connections. Confirm positive and negative terminals are connected correctly and the amplifier receives adequate power.
- • Why does the sound become distorted at higher volume?
Check amplifier gain, source volume, and equalizer settings. Excessive gain can cause clipping. Lower the gain and gradually increase volume for cleaner playback.
- • Why is the bass weaker than expected?
Check speaker polarity, amplifier settings, and crossover configuration. Reversed polarity can cause phase cancellation and reduce bass response.
- • Why does one speaker sound quieter than the other?
Check amplifier channels, speaker wiring, balance settings, and connections. A loose terminal or damaged wire can reduce output from one speaker.
- • Why does the speaker rattle during bass-heavy music?
Check mounting hardware, grille, and mounting surface for looseness. Tighten hardware securely and ensure the speaker is mounted firmly.
- • Why does the speaker sound harsh or overly bright?
Check treble, equalizer, and amplifier settings. Excessive high-frequency boost can make playback sound harsh. Reduce treble gradually until the sound becomes balanced.
- • What amplifier should I use with these speakers?
Use an amplifier matching the speakers' impedance and recommended RMS power. Avoid exceeding their continuous rating and verify amplifier output before installation.
- • Why does the sound change when I move the speakers?
Speaker positioning affects sound dispersion and bass response. Mount speakers securely and adjust their orientation toward the listening area for consistent coverage.
- • Can these speakers handle wet and marine conditions?
Yes. They are designed for marine environments, but proper installation and maintenance remain important. Keep connections secure and rinse saltwater residue after use.
- • Why does the speaker stop working after getting wet?
Inspect the wiring, connectors, and amplifier for moisture or corrosion. Allow components to dry completely, then check connections before powering the system again.
- Diameter : 12 Inch
- Sensitivity : 91 dB
- Impedance : 4 Ohm
- Frequency Response : 58-20,000 Hz
- Peak Power Handling : 800 Watts
- Color : Black
- RMS Power Handling : 400 Watts
Features:
- Extreme Long-Range Sound Performance: Powered by exclusive REV TEC™ driver technology, the REV 12 HD delivers exceptionally loud, clear, and detailed audio on-axis and off-axis, even at long distances while riding outside the wake.
- High-Output HLCD Design: Features a coaxially mounted titanium horn-loaded compression driver (HLCD) that produces crisp, powerful highs with wide horizontal dispersion and minimal distortion.
- Massive Mid-Bass Response: Equipped with a 12" Advanced Polymer Composite cone woofer and Santoprene rubber surround, delivering deep, punchy mid-bass with excellent control and durability.
- Full Passive Crossover Network: Precisely tuned crossover ensures accurate frequency distribution between woofer and compression driver for smooth, balanced sound reproduction.
- Rugged Marine-Grade Construction: Reinforced composite enclosure designed to withstand harsh marine environments, featuring UV resistance (ASTM-D4587) and salt-spray resistance (ASTM-B117) ratings.
- Integrated RGB LED Light Rings: Built-in front and rear LED rings illuminate the woofer cone and rear logo badge, adding premium visual appeal for night rides or dockside listening.
- Multiple Grille Options: Compatible with three different grille styles to customize the speaker’s look to match your boat’s aesthetic.
- Flexible Mounting Options: Compatible with X-Mount adapters or TC3-S swivel clamps (sold separately) for secure, adjustable tower installation.
- Sold as a Pair: Includes two REV 12 HD tower speakers; mounting clamps and adapters sold separately.
Specifications:
- Speaker Size: 12"
- Speaker Type: Wakeboard / Tower Speaker
- Design: 2-way coaxial
- Woofer Cone: Advanced Polymer Composite
- Woofer Surround: Santoprene Rubber
- Tweeter: Titanium Horn-Loaded Compression Driver (HLCD)
- Power Handling (RMS): 400 watts per speaker
- Peak Power Handling: 800 watts per speaker
- Frequency Response: 58Hz – 20kHz
- Sensitivity: 91 dB @ 1W / 1m
- Impedance: 4 ohms
- Integrated Lighting: Front and rear RGB LED light rings
- Speaker Harness: 4" attached harness with 2-pin Molex connector
- LED Harness: 9" harness with 4-pin Molex connector
- Enclosure Material: Reinforced marine-grade composite
- Mounting Hardware: Not included (sold separately)
- UPC: 810042172517
- Weight: 20
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
