Wet Sounds WWX-RGB 22G-150 150 ft Spool 4 Conductor 22 Gauge RGB Wire
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • Designed for marine use
Why Choose Wet Sounds WWX-RGB 22G-150 Wire and Cable?
Marine-grade wiring for LED lights
From the marine audio experts at Wet Sounds, this is designed for boaters, so you know it's going to give you the performance and reliability you expect. Their ultra-flexible 22-gauge, 4-conductor RGB wire uses a fully tinned, oxygen-free copper core that resists corrosion and retains signal integrity. Best of all, when you use Wet Wire as part of your Wet Sounds installation, they'll extend your gear warranty for one year.
Frequently Asked Questions (FAQ)
- • Why are some of the RGB colors showing incorrectly?
Incorrect color order or mismatched connector wiring can swap colors. Match each conductor by function rather than assuming every connector uses the same pin order.
- • Why won't the RGB lights turn on after wiring everything?
Check the 12V power connection, controller output, polarity, and continuity of all four conductors. A single loose connection can interrupt the lighting circuit.
- • Why does only one color work while the others do not?
A damaged conductor, incorrect pin connection, or faulty controller channel can prevent individual colors from working. Test each wire for continuity.
- • Can this wire be used for RGB speakers and LED lighting?
Yes. The four conductors are designed for RGB lighting connections and are suitable for compatible illuminated marine audio components and LED systems.
- • Why do the lights flicker or cut out intermittently?
Loose terminals, damaged conductors, poor grounds, or an unstable power connection can cause flickering. Inspect every splice and connector along the run.
- • Is 22-gauge wire sufficient for a long RGB installation?
It is intended for RGB lighting applications, but voltage drop can increase over long runs. Keep runs reasonable and verify the lighting system's current requirements.
- • Why does the lighting become dim at the end of a long wire run?
Voltage drop can reduce brightness over longer distances, especially when multiple lights share the same circuit. Check voltage at both ends of the run.
- • How do I prevent corrosion at the connections?
Use properly sealed marine connectors or heat-shrink connections and protect exposed conductors from moisture. Avoid leaving bare copper exposed in wet areas.
- • Can I cut the spool into multiple lengths for different lights?
Yes. The 150-foot spool can be cut into separate runs. Label each conductor before making connections to avoid mixing up the RGB channels.
- • Why are my aftermarket RGB connectors not matching the wire colors?
RGB connector pinouts are not always standardized. Trace each conductor from the controller to the lighting component instead of relying only on connector position or color.
- Length : 150 FT
- Gauge : 22 AWG
Features:
- Designed for marine use
- Fully tinned, oxygen-free copper core
- Priced per foot
- Warranty: 2 years
- UPC: 814820025439
- Weight: 10
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
