Wet Sounds WWX-BLUE PRIMARY 500 500 ft Spool Blue 18 gauge Remote Primary Wire Wet Wire - Blue 18 gauge Remote Primary WireWet Wire - Blue 18 gauge Remote Primary Wire
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • Wet Wire - Blue 18 gauge Remote Primary Wire
Why Choose Wet Sounds WWX-BLUE PRIMARY 500 Wire and Cable?
Wet Wire
Primary wire provides the connectivity needed for powering small, non-amplified devices, like an EQ or RGB controller. Each conductor is constructed of fully tinned oxygen-free copper for maximum electrical flow, protected inside water- and oil-resistant PVC insulation. Wet Wire is CEA-2015 and BC-5W2 marine compliant.
Frequently Asked Questions (FAQ)
- • Why isn't my remote turn-on wire activating the amplifier?
Check for a secure connection and verify that the source is providing 12 volts. A loose connection can prevent the amplifier from turning on.
- • Can I use this wire for an amplifier's main power cable?
No, 18-gauge primary wire is intended for low-current applications. Use a properly sized power cable for an amplifier's current requirements.
- • Why does my accessory keep shutting off intermittently?
Inspect the terminals for loose or corroded connections. Poor connections can cause unstable voltage and intermittent operation.
- • Is 18-gauge wire enough for an RGB controller?
Yes, it is designed for low-current accessories such as RGB controllers and other control circuits. For higher-current loads, use a larger wire gauge.
- • Why am I getting voltage drop at the end of a long wire run?
Long runs can experience voltage loss depending on the connected load. Keep the circuit within the wire's low-current application range or use a larger gauge when necessary.
- • Can I use it for marine and powersports installations?
Yes, it is designed for marine, powersports, and custom audio installations. The insulation is designed to resist moisture, oil, and vibration.
- • Why is the wire difficult to route around tight spaces?
The ultra-fine stranded construction and soft jacket are designed for flexibility. Avoid sharp bends or excessive pulling that could damage the conductor.
- • Why does my connection develop corrosion after being used on a boat?
Inspect the terminals regularly and keep connections properly protected from moisture. The tinned copper construction helps improve corrosion resistance, but exposed connections can still corrode.
- • Can I cut the 500-foot spool into multiple smaller runs?
Yes, the spool can be cut into separate lengths for different low-current circuits. Measure each run carefully before cutting to minimize waste.
- • Why does my accessory stop working after the wire gets wet?
Check the connections for moisture, corrosion, or a short circuit. Although the insulation is moisture-resistant, exposed terminals still need proper protection.
- Color : Blue
- Length : 500 ft
- Gauge : 18 AWG
Features:
- Wet Wire - Blue 18 gauge Remote Primary Wire
- Wet Wire cables have true AWG standard
- Pure Oxygen-free copper is tinned for full amplifier power delivery and maximum corrosion resistance (marine ready)
- Ultra-fine strand construction and soft outer jacket deliver excellent flexibility
- CEA-2015 & BC-5W2 Marine Compliant
- Length: 500FT
- Primary Color: Blue
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
- UPC: 810042170933
- Weight: 10
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
WWX-BLUE%20PRIMARY%20500-1.jpg)
