Alpine S2-SB10 Prismalink S2-Series 10" 600W RMS (1800W Peak Power Handling) 2 Ohm, Car Subwoofer in Sealed Subwoofer Enclosure with RGB Lighting
We are an Alpine authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • Linkable Sealed Enclosure loaded with one S2-W10D4 Subwoofer
- • IR Remote control (CR2025 battery NOT included)
- • 6" RGB wiring harness
- • Instruction sheet
- • Product registration information
- • Warranty information
- • Important notice
- • Owner's Manual
Why Choose Alpine S2-SB10 Enclosed Car Subwoofer?
Elevate Your Ride with Bold Sound and Vibrant Style
Bring bold sound and vibrant style to your ride with a 10-inch wedge-style subwoofer enclosure, preloaded with Alpine’s S-Series sub and built-in multi-link RGB lighting. Seamlessly control lighting colors, modes, and brightness using the Alpine iLX-W670’s touchscreen, creating a custom light show across single, dual, or quad setups. Designed for both performance and aesthetics, it delivers deep, punchy bass and head-turning visuals—all in one sleek, vehicle-ready package.
Effortless Light Control and Stunning Visual Impact
Create a stunning, uninterrupted light display with pre-wired RGB trim bars that sync seamlessly across multiple enclosures using the optional KTX-LK10 linking bracket—perfectly controlled with the included IR remote or Alpine’s iLX-W670 touchscreen for effortless customization and visual impact.
Unmatched Bass Performance with S-Series Subwoofers
Experience deep, accurate bass with Alpine’s next-gen S-Series subwoofers—preloaded in each enclosure and built with a rigid cone and High-Amplitude Multi-Roll (HAMR) surround to deliver powerful, distortion-free performance even at high volumes.
10" Sub Enclosure with Style and Muscle
Take your sound system to the next level with this compact yet powerful 10-inch sealed subwoofer enclosure—built with a carbon fiber/poly woofer, 600W RMS (1800W peak) power handling, and a wide 25–215 Hz frequency response, all wrapped in a sleek black design with silver trim for bold bass and clean installation.
Watch Before You Buy
Frequently Asked Questions (FAQ)
- • Can I add this enclosed subwoofer to my factory audio system?
Yes, it can be integrated with most factory stereos when paired with a compatible amplifier and the proper line output converter if needed. This makes it easy to improve bass performance without replacing the original head unit.
- • Why does the bass sound weaker than I expected after installation?
Weak bass is usually caused by improper amplifier gain, incorrect crossover settings, or enclosure placement inside the vehicle. Proper tuning and experimenting with the enclosure position often produce noticeably stronger bass.
- • What amplifier works best with this enclosed subwoofer?
An amplifier whose RMS output closely matches the subwoofer's continuous power rating delivers the best combination of performance and reliability. Matching the amplifier correctly also helps reduce distortion and protects the subwoofer from damage.
- • Does the direction the enclosure faces inside the trunk matter?
Yes, the orientation of the enclosure can noticeably affect bass output depending on your vehicle's interior design. Trying different positions often helps you find the strongest and most balanced bass response.
- • Why does the bass become distorted at higher listening levels?
Distortion is often caused by amplifier clipping, excessive bass boost, or gain settings that are too high. Proper amplifier tuning and balanced crossover adjustments usually restore clean, accurate bass reproduction.
- • Can this subwoofer be run on a 2-ohm amplifier without any modifications?
Yes, the enclosure comes loaded with an S2-W10D4 subwoofer that has dual 4-ohm voice coils pre-wired for a 2-ohm final impedance.
- • Why is my trunk or hatch vibrating after installing the enclosure?
The stronger low-frequency output can cause loose trim panels, license plates, and interior components to resonate. Adding sound-deadening material and tightening loose parts greatly reduces unwanted rattles.
- • Is a preloaded enclosure easier than building a custom subwoofer box?
Yes, the enclosure is already designed to match the subwoofer for reliable performance without custom fabrication. This saves installation time while providing predictable bass performance right out of the box.
- • Does the RGB lighting work without an Alpine touchscreen receiver installed?
Yes, the RGBW trim bar lighting can be fully controlled using the included IR remote, so an Alpine head unit isn't required.
- • Is this enclosed subwoofer a worthwhile upgrade over factory bass speakers?
Most users notice deeper bass, improved low-frequency clarity, and higher overall output compared to factory audio systems. When paired with a quality amplifier, it delivers a fuller and more enjoyable listening experience for all types of music.
- Diameter : 10 Inch
- Sensitivity : 85 dB
- Impedance : 2 Ohm
- Frequency Response : 25-215 Hz
- Peak Power Handling : 1800 Watts
- Number Of Subwoofers : 1
- Enclosure Type : Sealed
- RMS Power Handling : 600 Watts
Features:
- Striking Design with RGB Lighting: 10-inch wedge-style subwoofer enclosure with integrated multi-link capable RGB lighting system for single, dual, or quad setups
- Lighting Link Control via iLX-W670: Easily manage lighting colors, modes, and ambiance through the intuitive touchscreen interface on the iLX-W670 receiver
- Seamless Multi-Link Lighting: Pre-wired RGB trim bars sync across multiple enclosures using the optional KTX-LK10 linking bracket for a continuous light display
- IR Remote & Touchscreen Control: Adjust lighting effects using the included IR remote or directly through Alpine’s iLX-W670 digital multimedia receiver
- Powerful S-Series Subwoofers: Preloaded with Alpine’s next-gen S-Series subwoofers featuring a rigid cone and HAMR surround for powerful, accurate bass
Specifications:
- Woofer Size: 10.0 inches
- Speakers Per Box: 1
- Woofer Material: Carbon fiber/poly
- Enclosure Type: Sealed
- Color: Black with silver trim
- Pieces in System: 1
- Width: 14.5 inches
- Height: 13.0 inches
- Depth: 11.25 inches
- Connector Type: Spring terminal
- Frequency Response: 25.0 – 215.0 Hz
- Power Handling (RMS): 600 watts
- Power Handling (Peak): 1800 watts
- Sensitivity: 85.0 dB
- Impedance: 2 ohms
- UPC: 793276085320
- Weight: 50
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for repair within 1 year from the original date of purchase with proper return authorization.
