SSV Works X32-PUS10U Can-Am X3 and X3 Max Passangers side Only, Pod, Sub, Shallow Subwoofer, Underseat 10" Loaded with SSV Works 10M Subwoofer *Crossbar
We are a SSV Works authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 10" Unloaded Under-Seat Subwoofer Enclosure
- • Owner's Manual
Underseat Pod Design
The SSV Works X32-PUS10U offers a dedicated audio solution for Can-Am X3 and X3 Max passenger side installations, featuring a pod design that accommodates a subwoofer, shallow subwoofer, and underseat 10-inch speaker. This system comes pre-loaded with the SSV Works 10M subwoofer, delivering powerful and immersive bass. The inclusion of the *Crossbar enhances structural integrity and ensures a secure fit within the vehicle's interior.
Frequently Asked Questions (FAQ)
- • Why does the enclosure not seem to fit under my passenger seat?
The X32-PUS10U is a vehicle-specific enclosure designed for the passenger-side underseat area of the Can-Am Maverick X3. Verify the exact X3 model and year before installation because fitment listings vary by configuration.
- • Can I install a regular-depth 10-inch subwoofer in this enclosure?
The enclosure is designed for a 10-inch subwoofer, but the subwoofer itself must also meet the enclosure's available mounting-depth and clearance requirements. A shallow-mount driver is commonly paired with this enclosure, so measure the replacement woofer before purchasing.
- • Why does my new subwoofer hit the seat or surrounding hardware?
Underseat space is limited, so a woofer with excessive mounting depth can create clearance problems. Confirm the subwoofer's depth and the enclosure's mounting position before tightening everything down. The X32-PUS10U is specifically designed to occupy the passenger-seat area.
- • Do I need to modify the brake line to install the X32-PUS10U?
No. One of the main installation advantages is that the enclosure is designed to mount to the frame without requiring brake-line modification. If installation appears to require moving or cutting a brake line, stop and recheck the mounting position.
- • Why is my subwoofer producing weak bass after installation?
The enclosure is intended to provide controlled bass from a properly matched 10-inch driver. Weak output can result from an improperly matched subwoofer, incorrect amplifier settings, wiring polarity, or insufficient amplifier power rather than the fiberglass enclosure itself.
- • Can I use a dual-voice-coil 10-inch subwoofer with this box?
Yes, DVC 10-inch subwoofers are used in combinations featuring the X32-PUS10U. However, the voice-coil impedance and wiring configuration must match the amplifier's requirements before connecting the woofer.
- • Why does the enclosure move or vibrate when the bass gets loud?
The enclosure is intended to bolt to the vehicle frame using the supplied mounting hardware. If excessive movement or vibration occurs, inspect the mounting bolts, brackets, and frame attachment points for proper seating and tightness.
- • Is the X32-PUS10U actually loaded with a subwoofer?
The answer depends on the seller's package. The X32-PUS10U enclosure itself is generally listed as unloaded, meaning the subwoofer is sold separately, although some retailers offer bundles or loaded versions with an SSV Works or Kicker woofer. Always verify the package contents before ordering.
- • Why does the subwoofer sound distorted when I turn up the volume?
Distortion can occur when the amplifier is pushed beyond the subwoofer's capability or when gain and crossover settings are improperly adjusted. Verify the woofer's RMS rating, amplifier output, impedance, and gain settings instead of assuming the enclosure is causing the distortion.
- • Can I install the X32-PUS10U and still keep the passenger seat usable?
Yes. The enclosure is specifically designed as an under-passenger-seat solution, allowing the subwoofer to occupy otherwise unused space. Correct mounting and selecting a compatible woofer are important to preserve the intended seat clearance.
Features:
- Unloaded 10" under-seat subwoofer enclosure
- Bolt-in installation
- Metal kick plate for sub box protection
- Black textured finish matches the stock interior
- Designed for 10" subwoofer (not included)
- Stainless-steel mounting hardware
- Includes step-by-step installation instructions
- UPC: 815172016434
- Weight: 12
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
