Rockford Fosgate R2-2X12 Prime Series 12" 500W RMS 2 Ohms, Sealed Subwoofer Enclosure Loaded with Dual Car Subwoofer
We are a Rockford Fosgate authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • Dual sealed enclosure loaded with two R2D2-12 12" subwoofers
- • Owner's Manual
Why Choose Rockford Fosgate R2-2X12 Enclosed Car Subwoofer?
Easy Drop-in Installation
The R2-2X12 loaded enclosure features powerful bass output, high-quality construction, and easy drop-in installation. The R2 12” subwoofers offer more bass and more power handling though its dual voice coil design that handles 500 Watts of thumping performance.
Built With Class-leading Materials
The pre-built enclosure is internally wired to a 2-ohm load, so you just need to add an amplifier for epic bass performance, all right out of the box. The high-quality construction of the enclosure is built with 5/8” MDF (medium density fiberboard), OEM grade carpet, and high current binding posts. Built with class-leading materials, not only for a next-level look, but to ensure next-level performance.
Handles up to 500 watts
The R2-2X12 sealed loaded enclosure comes with two Prime R2D2-12 12" subs, wired for 2-ohm total impedance. Together, these speakers handle up to 500 watts RMS, so pair the box with an amp that'll give the subs a good workout. The woofers feature mica-injected polypropylene cones and compressed half-roll sealed poly-foam surrounds to deliver thump with determination.
Frequently Asked Questions (FAQ)
- • Why isn't the enclosure producing enough bass?
Check the amplifier gain, low-pass crossover, speaker polarity, and signal connections. Also verify the enclosure is securely mounted and positioned properly, since vehicle acoustics can significantly affect perceived bass output.
- • What amplifier should I use to power these subwoofers?
Choose an amplifier that provides clean RMS power appropriate for the enclosure's total impedance and power handling. Proper matching helps deliver strong bass while minimizing clipping, overheating, and potential damage.
- • Why does the amplifier go into protect mode during heavy bass?
Check the speaker wiring, final impedance, power and ground connections, and amplifier temperature. A short circuit, incorrect load, voltage drop, or excessive heat can activate the protection circuit.
- • Why does the bass sound distorted at higher volume?
Distortion may result from excessive gain, amplifier clipping, or a distorted source signal. Lower the gain, verify the source is clean, and avoid pushing the system beyond its recommended output levels.
- • Why am I hearing rattling or buzzing from the enclosure?
Inspect the enclosure mounting points, terminals, vehicle trim, and nearby panels. Loose hardware or interior components can vibrate with strong bass and create noises that may sound like a subwoofer problem.
- • Why does the bass sound weak inside my vehicle?
Vehicle acoustics, enclosure placement, phase, and crossover settings can affect perceived output. Verify polarity and try repositioning the enclosure to find a location that provides stronger cabin response.
- • Can I connect the enclosure to a factory radio?
Yes, but an appropriate amplifier and signal interface may be necessary. If the factory radio lacks RCA outputs, a compatible line output converter can provide a suitable signal for the amplifier.
- • Why does the bass disappear at certain frequencies?
Phase cancellation, vehicle acoustics, and crossover settings can create frequency dips. Check polarity and experiment with placement and phase adjustments to improve integration with the vehicle's main speakers.
- • Why does the amplifier shut down when playing bass-heavy music?
Sudden shutdowns can indicate voltage drop, overheating, excessive current demand, or an unsuitable impedance load. Inspect the power and ground wiring and confirm the amplifier is compatible with the enclosure.
- • How should I set the amplifier for clean bass?
Start with the head unit at a clean listening level and keep the amplifier gain low. Gradually increase the gain while listening for distortion, then adjust the low-pass crossover for smooth integration.
- Diameter : 12 Inch
- Sensitivity : 88.7 dB
- Impedance : 2 Ohm
- Peak Power Handling : 1000 Watts
- Enclosure Type : Sealed
- RMS Power Handling : 500 Watts
Features:
- sealed enclosure with two 12" Prime R2D2 subwoofers
- 5/8" medium density fiberboard construction covered with black carpet
- 2-ohm total impedance
- power handling: 500 watts RMS (1,000 watts peak power)
- sensitivity: 88.7 dB
- dimensions: 34.17"W x 14.38"H x 12.88"D1 x 7.5"D2
- warranty: 1 year (woofer only)
Specifications:
- Woofer Size (inches): 12
- Speakers Per Box: 2
- Woofer Material: Mica-Injected Poly
- Enclosure Type: Sealed
- Color: Black
- Pieces in System: 1
- Width (inches): 34-3/16
- Height (inches): 14-7/16
- Depth (inches): 12-51/16
- Connector Type: Spring posts
- Frequency Response: ---
- Power Range (Watts RMS): 500
- Maximum Wattage: 1000
- Sensitivity: 88.7 dB
- Impedance: 2 ohms
- UPC: 780687360252
- Weight: 37
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
