Rockford Fosgate M2WL-8H M2 Series 8" 300W RMS (1200W Peak Power Handling) 2-way Horn Loaded Wake Tower Speakers
We are a Rockford Fosgate authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) 8" M2 Series waketower speakers with stainless steel grilles
- • (2) Plastic sport grilles
- • (2) Upper mounting brackets
- • (2) Lower mounting brackets
- • (4) 2.5" - 3.0" rubber shims w/mounting hardware (four 2-5/8" bolts / 4 flat washers / 4 lock washers)
- • (2) 1.5" - 2.5" rubber shims w/mounting hardware (four 1-3/4" bolts / 4 flat washers / 4 lock washers)
- • (2) 12" 6-pin wire harnesses w/Deutsch connectors
- • (2) Connection cover-plates
- • (4) Plastic grommets
- • 1/8" Hex bit
- • T-45 Torx wrench
- • Instruction manual
- • Rockford Fosgate Contact information card
- • Owner's Manual
Throw Your Sound Across the Water With Authority
If you want your music to reach riders without fading out, the Rockford Fosgate M2WL-8H wake tower speakers are built to project with purpose. These 8 inch 2-way speakers use a high-efficiency horn tweeter that pushes crisp highs over long distances, making sure every beat stays clear even far behind the boat. Housed in sealed marine-grade enclosures, they are ready for sun, salt, and spray while delivering powerful, consistent audio every time you hit the water.
Stronger Midbass and Smooth Full-Range Sound
This setup is tuned to sound full, not just loud. The polypropylene woofer paired with VAST surround technology increases cone area for stronger midbass and better overall efficiency without increasing size. The coaxial M2 design keeps highs and lows blended smoothly, while the integrated concealed crossover ensures clean transitions and protects the system when you turn it up. With high power handling capability, you get loud, distortion-free performance that stays controlled even at higher volumes.
Built Tough With Style That Stands Out
Designed for real marine use, the M2WL-8H features a UV-stable ASA enclosure and IPX6 water resistance to handle harsh outdoor conditions without breaking down. The 360 degree adjustable mounting system with stainless steel clamps lets you aim your sound exactly where you need it, fitting a wide range of tower sizes. Add in customizable RGB lighting with Color Optix, dual grille options for your preferred look, and clean dual-port wiring for a professional install, and you get a system that looks aggressive and performs just as strong.
Frequently Asked Questions (FAQ)
- • Why does my M2WL-8H sound quieter than I expected?
The M2WL-8H is designed for high-output marine use, but actual volume depends heavily on amplifier power, gain settings, wiring, and speaker placement. Its 4-ohm impedance and 300-watt RMS rating should be matched with an appropriate amplifier for strong output.
- • Why is the sound distorted when I turn the volume up?
Distortion can happen when the amplifier is clipping, the gain is set too aggressively, or the system is being driven beyond its intended limits. Check amplifier settings and speaker wiring before assuming the M2WL-8H is damaged.
- • Why aren't the Color Optix lights turning on?
The speakers can play audio without the RGB lighting being configured. The M2WL-8H uses dedicated RGB connections and is designed to work with the Rockford Fosgate Color Optix Controller and RF Connect App, so the lighting wiring needs to be connected separately.
- • Why does my speaker rotate or move after I tighten the clamp?
The wake-can clamp includes a dedicated rotation lock-down mechanism. After positioning the speaker, the safety Torx fastener needs to be tightened securely; otherwise, vibration from the boat can allow the enclosure to move.
- • Can I mount the M2WL-8H on a flat tower instead of a round bar?
This is a common installation concern because the included mounting system is designed around tower-bar mounting. For a flat or unusual tower surface, additional mounting hardware or a custom mounting solution may be necessary rather than forcing the supplied clamps into an unsuitable position.
- • Why did my RGB wiring stop working after installation?
The M2WL-8H has separate speaker and RGB connections, so an audio connection can remain functional even when the lighting circuit has a wiring problem. Check the 6-pin harness, 12V RGB supply, ground, connectors, and controller connection.
- • Why is one M2WL-8H louder than the other?
Unequal output can result from different amplifier channels, incorrect polarity, loose connections, or uneven gain settings. Verify both speakers receive the same signal and that the positive and negative speaker connections are correctly matched.
- • Can water get into the M2WL-8H connectors?
The M2WL-8H uses water-tight Deutsch/Amphenol connections and is designed with an IP67-rated marine construction. However, connectors should still be properly seated and wiring should be routed and protected according to the installation instructions.
- • Why does the speaker vibrate or rattle when the bass gets loud?
A loose clamp, mounting bolt, grille, or nearby tower component can create rattling that sounds like a speaker problem. Check all mounting hardware and surrounding surfaces before replacing the speaker. Rockford's installation instructions specifically emphasize secure mounting and checking clearance around the enclosure.
- • What amplifier should I use with the M2WL-8H?
The M2WL-8H is a 4-ohm speaker rated for 300 watts RMS per speaker, so an amplifier should be selected to provide suitable power at 4 ohms without excessive clipping. For a pair, verify the amplifier's actual output per channel and impedance capability before connecting them.
Features:
- Horn-Driven Marine Audio Performance: Features 8" 2-way wake tower speakers with a high-efficiency horn tweeter, delivering focused, long-range sound projection ideal for watersports applications.
- Rugged Marine-Grade Construction: Sealed enclosure and components are treated with UV inhibitors and salt-fog resistance, ensuring reliable operation in harsh outdoor and marine environments.
- Enhanced Bass Output Design: 8" polypropylene woofer with VAST Surround technology increases effective cone area for stronger midbass response and improved efficiency.
- Precision Two-Way Integration: Coaxial M2 Series configuration provides smooth frequency transition between highs and lows for balanced, full-range audio.
- Protected Crossover Network: ICC (Integrated Concealed Crossover) with 12dB/octave design and built-in protection circuitry ensures consistent performance and long-term durability.
- High Power Capability: Handles up to 300W RMS (1200W peak) per speaker, delivering powerful, distortion-free sound at high volume levels.
- Customizable RGB Lighting System: Integrated Color Optix illumination enhances both the speaker cone and rear logo with adjustable colors and dynamic lighting effects.
- UV-Stable ASA Enclosure: High-density construction resists sun exposure and environmental wear, maintaining structural integrity over time.
- IPX6 Water Resistance: Engineered to withstand heavy water spray from all directions for dependable marine use.
- 360° Adjustable Mounting Hardware: Stainless steel clamps with full rotation capability allow precise positioning on 1.5" to 3.0" tower tubing.
- Dual Grille Styling Options: Includes stainless steel and UV-stable ASA sport grilles for flexible appearance customization.
- Clean Dual-Port Wiring Setup: Marine-grade Deutsch connectors with hidden and external routing options enable a clean, professional installation.
Specifications:
- Speaker Type: 2-Way Loaded Enclosure
- Speaker Size: 8"
- Speaker Quantity: 2
- Speaker Series: M2 (M2-8H)
- Enclosure Design: Sealed
- Enclosure Material: High density ASA
- Speaker Connector: 6-pin Deutsch™/Amphenol™
- Frequency Response (Hz): 20 Hz - 25 kHz
- Nominal Impedance (Ohms): 4Ω
- Power Handling (RMS)
- 300 Watts (RMS)
- 1200 Watts (PEAK)
- LED Current Draw: 0.25 A
- In The Box(2) Loaded wake cans
- (2) Universal clamps (replacement 1130-74671-B1)
- (4) Grommets
- (2) Spare safety inserts for screw clamp
- (1) Safety Torx wrench
- (2) 1.5" to 2.5" rubber inserts and stainless screws
- (2) 2.5" to 3" rubber inserts and stainless screws
- (2) Stainless steel grilles
- (2) Sport grilles
- (1) Allen bit for rotating speakers
- (2) 6-pin Deutsch™ harnesses (1130-73416-C1)
- LED Recommended Fuse: 1 A
- LED Voltage Range: 9 - 16 VDC
- Dimensions: 12.75" x 9" x 14.4" (324.0 mm x 230.4 mm x 365.7 mm)
- UPC: 780687355586
- Weight: 22
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
