Rockford Fosgate X317-STG2 X3 Stage-2 Audio System for Can-Am 2017 and Up (Gen-3)
We are a Rockford Fosgate authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • PMX-1
- • X317-DK
- • X317-FSE
- • M0-65B
- • M0WL-65MB
- • MX-RSW16
- • Owner's Manual
Why Choose Rockford Fosgate X317-STG2 Stage System?
Premium Audio for Your Off-Road Adventures
Upgrade your ride with a complete Element Ready™ audio system that delivers powerful sound without sacrificing space. Enjoy easy plug-and-play installation for Can-Am X3 models, seamless PMX-1 media control, and a dash kit compatible with PMX-1, PMX-2, and PMX-3. Experience premium audio built for adventure!
Upgrade Your UTV Audio Experience
Enhance your UTV audio with the MX-RSW16 Rear Color Optix™ Speaker Harness, designed for seamless rear speaker integration. Pair it with the M0WL-65MB 6.5" Element Ready™ Moto-Can Speakers for bold, high-performance sound built to handle any adventure!
Engineered for Select Can-Am® Maverick X3 Models with Smart-Lok Integration
Elevate your off-road audio experience with M0-65B 6.5" Marine Grade Speakers, engineered for durability and superior sound. Stay connected with enhanced reception from the included wired antenna, and enhance your ride with X317-FSE 6.5" Front Color Optix™ Speaker Panels, designed for select Can-Am® Maverick X3 models with Smart-Lok integration.
High-Output Performance for Any Adventure
Experience powerful, full-range sound with these 2-way speakers, featuring a 6.5" midrange driver and a 0.5" tweeter for crisp highs. Designed with a 4-ohm impedance and high-pass crossover (6dB), they deliver 65W RMS / 250W peak power with a 40Hz – 25kHz frequency response. With a sensitivity of 90.5 dB (@1W/1M) and 91 dB (@2.83V/1M), these speakers provide clear, high-output performance for any adventure.
Frequently Asked Questions (FAQ)
- • Why is there no sound after installation?
Check the fuse, power connections, audio source, and speaker wiring. Make sure all connectors are fully seated and receiving a proper audio signal.
- • Why does the audio cut out while riding?
Vibration can loosen connectors or wiring. Check the plugs, terminals, grounds, and speaker connections, then secure the cables properly.
- • Why does the sound distort at high volume?
Excessive gain, clipping, or insufficient amplifier power can cause distortion. Lower the gain or volume and check the audio settings.
- • Why is one speaker louder than the other?
Check the balance setting, speaker wiring, and amplifier channels. Swapping connections can help identify whether the issue follows the speaker or channel.
- • Will this system fit my vehicle?
Fitment depends on the exact vehicle, year, and existing equipment. Verify compatibility and mounting requirements before installation.
- • Why do the speakers rattle on rough terrain?
Loose brackets, panels, or mounting hardware can cause rattling. Check and tighten all mounting points and surrounding trim.
- • Why is the bass weaker than expected?
Check speaker polarity, crossover settings, amplifier gain, and mounting. Incorrect wiring or settings can reduce bass response.
- • Why does the system shut off at high volume?
Overheating, low voltage, loose connections, or amplifier protection can cause shutdowns. Check the power supply and wiring carefully.
- • Why won't my phone connect properly?
Check Bluetooth settings, remove old pairings, and reconnect the device. Testing another phone can help determine the source of the issue.
- • What should I check if the system suddenly stops working?
Inspect the fuse, battery connection, ground, connectors, and speaker wiring. Look for loose or damaged cables before testing again.
Features:
- Audio System: Complete Element Ready™ audio system
- Space-Saving Design: Enclosures for speakers and/or subwoofer integrate seamlessly without losing passenger space
- Easy Installation: Direct connect wiring harnesses for Can-Am X3 models
- Dash Kit: X317-DK – Compatible with PMX-1, PMX-2, or PMX-3 on select Can-Am® Maverick X3 models
- Media Receiver: PMX-1 – Punch Marine Grade Media Receiver with 2.3" Dot Matrix Display
- Rear Speaker Harness: MX-RSW16 – Rear Color Optix™ Speaker Add-On Harness for select UTV models
- Moto-Can Speakers: M0WL-65MB – M0 6.5" Element Ready™ Moto-Can Speaker (Black)
- Marine Grade Speakers: M0-65B – M0 6.5" Marine Grade Speakers (Black)
- Antenna: Includes wired antenna for enhanced reception
- Front Speaker Panels: X317-FSE – 6.5" Front Color Optix™ Speaker Panels with Smart-Lok for select Can-Am® Maverick X3 models
Specifications:
PMX-1
- built-in amplifier (25 watts RMS/50 peak x 4 channels)
- built-in Bluetooth for music streaming (will not make calls)
- works with Apple and Android smartphones
- USB port and aux input
- rugged Element Ready design
- 2.3" dot matrix display
- global AM/FM/Weather tuner (antenna not included)
M0-65B
- Speaker Type: 2-Way Full-Range
- Nominal Impedance: 4 Ohms
- Tweeter Size: 0.5" (12.7 mm)
- Midrange Size: 6.5"
- Power Handling: 65 Watts RMS / 250 Watts Peak
- Frequency Response: 40Hz – 25kHz
- Crossover: High-Pass (HP) 6dB
- Sensitivity (@ 1W/1M): 90.5 dB
- Sensitivity (@ 2.83V/1M): 91 dB
M0WL-65MB
- Speaker Type: 2-Way Loaded Enclosure
- Speaker Size: 6.5"
- Speaker Series: M0-65
- Speaker Quantity: 2
- Speaker Connector: 6-pin Deutsch™ / Amphenol™
- Power Handling: 65 Watts RMS / 250 Watts Peak
- Nominal Impedance: 4Ω
- Frequency Response: 40Hz – 25kHz
- UPC: 780687360047
- Weight: 34
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.