Rockford Fosgate MX-CAM-X317 MX-CAM Camera Plug and Play Harness and Mounting Kit for Select X3 Models
We are a Rockford Fosgate authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • Can-Am X3 License plate bracket mount (steel)
- • (2) Screws/2 nuts (hardware for Camera plate)
- • Main harness with carling switch
- • (Can-Am X3 Tail-light T-Harness adapter
- • Owner's Manuel
Harness Plugs Directly
Minimal drilling, no cutting and designed to work right out of the box. Simple installation ensures less time in the garage and more time out riding.When paired with a vehicle specific installation kit, the T-harness allows for easy, error proof connections along with mounting brackets for a direct fit on select Polaris® and Can-Am® models. Harness plugs directly into PMX-3 and PMX-8 source units with an included trigger wire adaptor.
Plug and Power Design
Plug and Power Design: Utilizing a common main harness and a vehicle specific T-Harness to connect easily into select Polaris and Can-Am models. Hi-Res Color Camera: High resolution color camera provides crystal clear picture for backing up or rock crawling. Easy Installation: Vehicle specific mounting brackets allow direct fit for Ranger, Can-Am, and 2014+ RZR.
Frequently Asked Questions (FAQ)
- • Why can't I see anything on the camera after installing the MX-CAM-X317?
The MX-CAM-X317 is the vehicle-specific mounting and wiring kit, while the MX-CAM camera itself is sold separately. If the camera was not purchased with the kit, there will be no camera image to display.
- • Why doesn't the camera plug into my X3's factory screen?
This setup is intended for select Can-Am X3 models using compatible Rockford Fosgate PMX-3 or PMX-8DH source units. A factory display or unsupported radio may not provide the required camera connection.
- • Why did I receive a mounting kit without the actual camera?
This is an easy ordering mistake because the MX-CAM-X317 does not include the MX-CAM camera. The product listing identifies the camera as sold separately, so both components must be selected for a complete camera installation.
- • Why does my camera installation have a loose or unreliable connection?
The system uses a vehicle-specific harness that connects to the compatible vehicle wiring. A partially seated connector, damaged plug, or improperly routed harness can cause intermittent operation, so inspect every connection before replacing the camera.
- • Why does the camera picture disappear when I'm riding over rough terrain?
Off-road vibration can expose problems with loose connectors or mounting hardware. Rockford's motorsports camera system is designed with vibration resistance, but the harness and camera still need to be firmly secured during installation.
- • Does the MX-CAM-X317 fit every Can-Am Maverick X3?
No. It is designed for select Can-Am X3 applications, so the model year and audio/source-unit configuration should be checked before ordering. The kit is specifically marketed for X3 models using compatible PMX-3 or PMX-8DH systems.
- • Why does my camera look poorly positioned after mounting it?
Camera visibility depends on the mounting position and orientation. Rockford's installation documentation identifies the correct camera orientation, including the marked top position, so installing the camera mount upside down or incorrectly can affect the viewing angle.
- • Can I use this kit with a different aftermarket camera?
The MX-CAM-X317 is designed around the Rockford Fosgate MX-CAM, with the corresponding vehicle-specific harness and mounting arrangement. Using a different camera may require different connectors, mounting hardware, or wiring.
- • What should I check if the camera works sometimes but cuts out while driving?
Start with the camera plug, vehicle-specific harness, power connection, and cable routing. Off-road movement can pull on inadequately secured wiring, while damaged or loose connections can produce intermittent video rather than a complete failure. Rockford also recommends diagnosing installation issues before assuming a component is defective.
- • Is the MX-CAM-X317 difficult to install on a Can-Am X3?
The X3-US10K is an enclosure/subwoofer solution rather than a powered all-in-one subwoofer. SSV Works lists the enclosure with a pre-mounted/wired woofer when a subwoofer option is selected, but the enclosure itself does not function as its own amplifier. A compatible external amplifier is therefore required.
Features:
- Kit requires MX-CAM motorsports backup camera
- Includes license plate mount for use on Can-Am® X3 Models
- Vehicle specific T-harness allows for quick no mistake wire connections
- Prewired and included camera switch for quick access
- UPC: 780687359737
- Weight: 1
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
