Kenwood P-HD2R Excelon Series Front Amplifier Package for select 2014-Up Harley-Davidson® Motorcycles — Includes a 2-Channel Amp and 6"X9" Bag Speakers
We are a Kenwood Excelon authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • Excelon Series Front Amplifier Package for select 2014-Up
- • XM160-2 Amplifier
- • 2-Channel amplifier with attached 6" speaker and 8" power/ground harnesses (inline 15A ATO fuse)
- • Street Glide mounting plate (attached to amplifier)
- • Road Glide mounting plate
- • 5' Power & ground harness with inline 15A ATO fuse
- • 17" Input/Bypass harness
- • 21" Front output harness
- • 6" Input Link harness
- • (10) 6" wire ties
- • (4) Star washers
- • (2) 2-way speakers
- • (2) 14+ silicon mounting gaskets
- • (2) 98-13 silicon mounting gaskets
- • (2) Speaker adapters
- • (2) Mounting frames
- • (2) Grilles
- • 4.5' Loomed dual-speaker cable (two 2-pin connectors on one end/ 4-pin plug on other end)
- • (2) 46" lengths of jacketed speaker wire with inline grommets (2-pin plug on one end/ slip-on terminals on other end)
- • (2) Silicon gaskets
- • (10) wire clamps with adhesive backing
- • (24) 1/2" screws
- • (3) Rubber screw-bushings
- • (15) 7.5" wire ties
- • Owner's Manual
Kit Fits Right Into Your Harley
If you're ready to upgrade the sound on your 2014-up Harley-Davidson®, Kenwood has a solution. The Excelon P-HD2R speaker and amp package features saddlebag speakers and a compact amplifier designed specifically for select Road Glide and Street Glide models (excluding CVO® models). This kit fits right into your Harley, and no flashing of the factory radio is required.
Produce Big-time Power
This package includes a 2-channel Kenwood Excelon XM160-2 amplifier that'll produce big-time power. This compact Class D amp is built to handle life on the road, so you'll enjoy excellent performance no matter where your travels take you. The XM160-2 is made to rock hard and run cool, even when tucked into a tight space. Plus, the high-efficiency design won't overload your motorcycle's electrical systems, and it'll work with your factory radio or any aftermarket receiver.
Sharp-looking Metal Mesh Grilles
For the saddlebags, there's a pair of Kenwood Excelon 6”x9” XM69R speakers plus a pair of sharp-looking metal mesh grilles. These powerful speakers feature a sealed design that keeps water from passing through, plus silicone gaskets for extra protection. The package also includes a cut-in kit for the saddlebags.
Features:
- No Flashing Required: The Kenwood XM160-2 amplifier is tuned for optimal performance with a stock Harley-Davidson headunit, eliminating the need to flash the factory radio.
- High-Power Output: The 2-channel amplifier delivers 80W RMS x 2 (2Ω) for clear, dynamic sound.
- Class D Efficiency: Compact, lightweight design uses digital switching technology, generating less heat and allowing installation in tight spaces.
- Signal-Sensing Turn-On: The amplifier automatically powers on when it detects a signal and turns off when idle, removing the need for a remote turn-on lead.
- Input Sensitivity Control: Lets you dial in the maximum headunit signal without distortion, ensuring crisp audio at any volume.
- Complete Wiring Kit: Includes power, ground, speaker, and input harnesses with inline fuses and Harley-specific connectors for safe, plug-and-play installation.
- Dual Mounting Plates: Comes with pre-applied hook-and-loop mounting plates for Road Glide/Road Glide Ultra and Street Glide/Street Glide Ultra for quick, secure installation.
- Full-Range Saddlebag Speakers: Includes two Kenwood XM69R 6"x9" 2-way speakers with IMPP woofers, 1" PEI dome tweeters, 2-ohm impedance, and 200W RMS (400W peak).
- Optimized Sound Projection: CA-CUT14 cut-in lid kit positions speakers toward the rider, minimizing bag space loss while enhancing audio clarity.
- Weather-Resistant Design: Sealed speaker construction with silicone gaskets ensures durability against rain and road conditions.
Specifications:
- Amplifier: Kenwood Excelon XM160-2, 2-channel, Class D, 80W RMS x 2 (2Ω)
- Speakers: Kenwood XM69R 6"x9" full-range, 2-way, IMPP woofer, 1" PEI tweeter, 200W RMS / 400W peak, 2Ω impedance
- Cut-In Kit: Kenwood CA-CUT14 with grilles, built-in water drain channels, mounting depth 2.925"
- Included Accessories: Road Glide and Street Glide mounting plates, power, speaker, and input wiring
- Frequency Response: 20Hz–25kHz
- Compatibility: Select 2014-up Harley-Davidson Road Glide and Street Glide motorcycles
- Construction: All-weather materials for amplifier, speakers, and harnesses
Kenwood Excelon XM69R 6"x9" full-range speakers
- designed to fit your Harley's hardshell bags
- IMPP woofer cones
- 1" PEI dome tweeters
- power handling: 200 watts RMS (400 watts peak)
- frequency response: 20-25,000Hz
- impedance: 2 ohms
- silicone gaskets included
- Kenwood CA-CUT14 cut-in kit included
- mounting depth: 2.925"
- warranty: 2 years
Kenwood Excelon XM160-2 motorcycle 2-channel amplifiers (2)
- high-efficiency design works with Harley-Davidson electrical systems
- speaker-level input for OEM or aftermarket receiver
- Class D amp technology
- 80 watts RMS x 2 (2 ohms)
- includes mounting plates and amplifier wiring kit
- warranty: 2 years
- UPC:
- Weight: 35
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.