Kicker 50HDR154 6.5" 4-channel Front Speaker/Amplifier Kit for 2015 & Up Harley Davidson Road Glide with Grilles “Shark-Nose”
We are a Kicker authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 6.5" 4-channel Front Speaker/Amplifier Kit
- • Amplifier mounting plate
- • 80" Wiring harness w/ inline 20A mini ATC fuse
- • Dummy load plug
- • (2) 12mm hex-socket screws
- • (2) Nylock nuts
- • (2) 8" wire-ties
- • (6) 6" wire-ties
- • (2) "Shark Nose" Grilles
- • (4) channel amplifier
- • 12" Input harness (8-pin Molex plug on one end and 4 female RCAs on other end)
- • 6" Speaker output/remote turn-on harness (10-pin Molex plug)
- • Power and ground terminal block
- • (4) 5/8" Screws
- • Switch cover with 3M adhesive backing
- • (2) 2-way speakers
- • (2) Grilles (installed)
- • (2) Kicker logo grille badges
- • (2) 12" Lengths of speaker wire (tinned bare wire on one end and female quick slides on the other)
- • (4) Red plastic crimp connectors
- • (8) 1" Self-tapping screws
- • (8) Speed clips
- • Owner's Manual
Why Choose Kicker 50HDR154 Motorcycle & Off-Road Speakers?
Complete High-Performance Audio System for Harley Road Glide
This audio system is a perfect fit for 2015–2023 Harley-Davidson Road Glide “Shark-Nose” fairings, offering a complete installation solution with high-performance 6-1/2" weather-proof coaxial speakers, moisture-resistant polypropylene woofer cones, and super-efficient 20mm neo-titanium-dome tweeters for loud, clear, and crisp sound.
Lightweight, High-Performance Powersports Audio
This audio system features a lightweight motor structure with neodymium magnets for better bike balance, extreme volume capability to cut through wind, road noise, and helmets, and a compact amplifier that delivers high power output with low current draw.
Optimized Powersports Audio Amplifier Setup
This system includes a custom amp mount with a precision-fit bracket, coaxial speakers rated at 120W peak / 60W RMS for powerful performance, and a redesigned amplifier delivering 75W x 4 RMS at 2 ohms (14.4V) for strong, reliable output.
Frequently Asked Questions (FAQ)
- • What should I do if my audio system has no sound?
Verify that the amplifier is receiving power and that the remote turn-on lead is properly connected to the head unit. You should also inspect all fuses, as a blown fuse may occasionally look intact even when the internal element is fractured.
- • Why do the speakers sound distorted at high volume?
Distortion is usually caused by amplifier clipping or gain settings that are too high. Proper amplifier tuning will provide cleaner sound and help prevent speaker damage.
- • Can I connect these directly to my factory radio?
Yes. They work with many factory and aftermarket motorcycle stereos, but an external amplifier is recommended for better volume and clarity.
- • Why is one speaker louder than the other?
This is commonly caused by loose wiring, incorrect balance settings, or a poor electrical connection. Inspect all wiring and verify your audio settings before replacing the speaker.
- • Can these handle rain and dusty trails?
Yes. They are designed to resist moisture, dust, vibration, and UV exposure for motorcycle and off-road applications.
- • Why is it difficult to hear my music while riding?
Wind, engine, and road noise can overpower your audio at higher speeds. Using a compatible amplifier and adjusting the equalizer can improve overall sound projection.
- • Why do the speakers stop working after a long ride?
An overheating amplifier or loose electrical connection can interrupt playback. Check the amplifier's ventilation and inspect all wiring for secure connections.
- • Should I use marine-grade speaker wire during installation?
Yes. Marine-grade wiring provides better protection against corrosion, vibration, and moisture than standard automotive wire.
- • Why do I hear engine whine through the speakers?
Engine whine is usually caused by poor grounding or electrical interference. Improving the ground connection and routing signal cables away from power wires often eliminates the noise.
- • Can I upgrade my audio system with additional speakers later?
Yes. You can expand your system with compatible amplifiers, speakers, or a subwoofer if your vehicle's electrical system supports the added equipment.
Features:
- Perfect Fit: Specifically designed for 2015–2023 Harley-Davidson Road Glide “Shark-Nose” fairings.
- Complete Audio Solution: Includes everything needed for installation in one box.
- High-Performance Speakers: 6-1/2" redesigned weather-proof coaxials for loud, clear sound.
- Moisture-Resistant Design: Polypropylene woofer cones engineered to resist water intrusion.
- High-Output Tweeters: Super-efficient 20mm neo-titanium-dome tweeters deliver crisp highs.
- Lightweight Motor Structure: Neodymium magnets reduce weight for improved bike balance.
- Extreme Volume Capability: Designed for clear audio through wind, road noise, and helmets.
- Compact Power: Small-footprint amplifier with high power output and low current draw.
- Custom Amp Mount: Includes a precision-fit mounting bracket for the amplifier.
- Optimized Power Handling: Coaxials rated at 120W peak / 60W RMS for powerful performance.
- Strong Amplifier Output: Redesigned amp delivers 75W x 4 RMS at 2 ohms (14.4V).
Specifications:
- Speaker Size: 6-1/2" coaxial (pair)
- Speaker Impedance: 2 Ω
- Peak Power Handling: 120 W
- RMS Power Handling: 60 W
- Tweeter: 20mm neo-titanium dome (bridge-mounted)
- Woofer Material: Polypropylene
- Amplifier RMS Power: 75W x 4 @ 2 Ω, 14.4V
- Amplifier Type: Small-footprint, high-efficiency, low-current-draw design
- Installation: Fully plug-and-play; includes pre-terminated wiring harnesses
- Compatibility: 2015–2023 Harley-Davidson Road Glide “Shark-Nose” fairing
- Weatherproof: Yes
- UPC: 713034047605
- Weight: 9.6
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
