Kicker 50HDR982 5.75" Speakers w/ 4-Channel Amplifier Fairing Audio Upgrade Kit for 1998-2013 Harley Davidson Road Glide
We are a Kicker authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 5.75" Speakers w/ 4-Channel Amplifier Fairing Audio Upgrade Kit
- • Amplifier mounting plate
- • 7' Wiring harness w/ inline fuse holder and installed 30A ATC fuse
- • Dummy load plug
- • (6) 6" Wire-ties
- • (6) 12mm hex-socket screws
- • (6) Nylock nuts
- • (4) 1-1/2" sections of heat-shrink tubing
- • Installation instructions
- • (4) channel amplifier
- • 12" Input harness (8-pin Molex plug on one end and 4 female RCAs on other end)
- • 6" Speaker output/remote turn-on harness (10-pin Molex plug)
- • Power and ground terminal block
- • (4) 5/8" Screws
- • Switch cover with 3M adhesive backing
- • (2) 2-way speakers
- • (2) Grilles
- • Owner's Manual
Why Choose Kicker 50HDR982 Motorcycle & Off-Road Speakers?
Complete Audio System for 1998–2013 Harley Road Glide
This system is a perfect fit for 1998–2013 Harley-Davidson Road Glide, offering a complete installation solution with redesigned weather-proof coaxial speakers and moisture-resistant polypropylene woofer cones engineered to withstand water and road exposure.
High-Performance Powersports Tweeters
These speakers feature super-efficient 20mm neo-titanium-dome bridge-mounted tweeters for crisp highs, a lightweight motor structure with neodymium magnets for improved bike balance, and extreme volume capability for clear sound through helmets, wind, and road noise.
High-Powered Compact Amplifier System
This system features a compact, high-power amplifier with very low current draw, a custom precision-fit amp mount for secure installation, coaxial speakers rated at 120W peak / 60W RMS for optimized power handling, and a redesigned amplifier delivering 75W x 4 RMS at 2Ω (14.4V) for strong, reliable output.
Frequently Asked Questions (FAQ)
- • How do I secure the wiring to prevent damage?
Use the provided cable ties to bundle your wires and route them safely behind the fairing to avoid binding. Ensure no wires are pinched when the steering head is turned fully to the left or right.
- • Why is the amplifier not turning on after installation?
A blown fuse, poor ground, or incorrect remote turn-on wiring is the most common cause. Check all power connections and confirm the amplifier is receiving both constant and switched power.
- • Can I keep my factory Harley-Davidson radio with this kit?
Yes. The kit is designed to work with the factory fairing audio system on compatible Road Glide models.
- • Why do the speakers sound distorted when I raise the volume?
Distortion is usually caused by amplifier clipping or gain settings that are too high. Proper gain adjustment and equalizer tuning will produce louder, cleaner sound.
- • Can I hear the music clearly at highway speeds?
Yes, the included four-channel amplifier is designed to provide higher output for improved clarity while riding. Wind noise will still affect perception, so proper tuning is recommended for the best performance.
- • Why is one speaker louder than the other after installation?
This is commonly caused by incorrect balance settings, loose speaker wiring, or an improperly connected harness. Verify all wiring connections and audio settings before troubleshooting the speakers themselves.
- • Can I add saddlebag speakers or rear speakers later?
Yes. Since the kit includes a four-channel amplifier, additional compatible speakers can often be added depending on how the amplifier channels are configured.
- • Why do I hear engine whine through the speakers?
Engine whine is typically caused by poor grounding or electrical interference. Improving the ground connection and routing audio cables away from power wiring usually eliminates the noise.
- • Is this kit weather-resistant for everyday riding?
Yes. The speakers and included components are designed to handle rain, vibration, and typical outdoor riding conditions when installed correctly.
- • Can I upgrade to a larger amplifier or add a subwoofer later?
Yes. Many Road Glide owners expand their audio system with additional amplifiers or motorcycle-specific subwoofers as long as the charging system can support the extra power demand.
Features:
- Perfect Fit: Specifically designed for 1998–2013 Harley-Davidson Road Glide.
- Complete Audio Solution: Includes everything needed for installation in one box.
- High-Performance Speakers: Redesigned weather-proof coaxial speakers (pair).
- Moisture-Resistant Design: Polypropylene woofer cones resist water and road exposure.
- High-Output Tweeters: Super-efficient 20mm neo-titanium-dome tweeters, bridge-mounted for crisp highs.
- Lightweight Motor Structure: Neodymium magnets reduce weight for improved bike balance.
- Extreme Volume Capability: Clear sound even through helmets, wind, and road noise.
- Compact Power: Small-footprint, high-power amplifier with very low current draw.
- Custom Amp Mount: Includes a precision-fit bracket for secure amplifier installation.
- Optimized Power Handling: Coaxials rated for 120W peak / 60W RMS.
- Strong Amplifier Output: Redesigned amp delivers 75W x 4 RMS @ 2Ω (14.4V).
Specifications:
- Speaker Size: Coaxial (pair)
- Speaker Impedance: 2 Ω
- Peak Power Handling: 120 W
- RMS Power Handling: 60 W
- Tweeter: 20mm neo-titanium dome (bridge-mounted)
- Woofer Material: Polypropylene
- Amplifier RMS Power: 75W x 4 @ 2 Ω, 14.4V
- Amplifier Type: Small-footprint, high-efficiency, low-current-draw design
- Installation: Fully plug-and-play; includes pre-terminated wiring harnesses
- Compatibility: 1998–2013 Harley-Davidson Road Glide
- Weatherproof: Yes
- UPC: 713034091615
- Weight: 13
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
