facebook no script image

Rockford Fosgate  18WRNGLER-STG5

All-In-One Audio Kit for Select 2018-2023 Jeep Wrangler Unlimited JL

Item #94658

Condition:   Brand New

Product Highlights

  • Compatible with 2018-2023 Jeep Wrangler Unlimited JL
  • Includes speakers, subwoofer, and amplifier
  • Plug-and-play installation
  • Enhanced audio performance
  • Designed for factory integration

  Free 2-Years Warranty Included!
60 DAYS Returns Accepted.
FREE Lifetime Tech Support.
FREE Shipping.
60 DAYS Price change protection.

$4,499.99

Reg. Price $5,250.00  Save $750.01
  Free 2-Years Warranty Included!
60 DAYS Returns Accepted.
FREE Lifetime Tech Support.
FREE Shipping.
60 DAYS Price change protection.

No Credit needed for acima logoLearn More

Rockford Fosgate Authorized Dealer

Huge Saving on Other items:


Huge Saving on Other items:


Rockford Fosgate Banner

Rockford Fosgate 18WRNGLER-STG5 All-In-One Audio Kit for Select 2018-2023 Jeep Wrangler Unlimited JL


We are a Rockford Fosgate authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!

What's Inside?
  • • M5-1000X1 1000W Marine Mono Amplifier with Element Ready™
  • • M5-800X4 800W 4-Ch Marine Amplifier with Element Ready™
  • • (2) TMS65 6.5" 150W Peak Power Handling Full Range Coaxial Speakers
  • • (2) T1S2-12 12" Subwoofer 2-Ohm Single Voice Coil
  • • (2) M2-TS 1" Marine Add-On Tweeter Kit
  • • Digital Signal Processor
  • • Owner's Manual

 

 

Full Blast Jeep Audio That Hits Way Above Stock

If you’re ready to turn your Jeep Wrangler into something that sounds as aggressive as it looks, the Rockford Fosgate 18WRNGLER-STG5 All-In-One Audio Kit brings serious firepower to the trail. With an 1,800-watt high-output system, it delivers audio that’s rated up to 4x louder than base setups and nearly double the output of premium factory systems. This is a full-system architecture, not a piecemeal upgrade, combining dual 12-inch subwoofers, 6.5-inch coaxial speakers for front and overhead placement, 1-inch tweeters, and dual pre-tuned amplifiers rated at 1,000W and 800W so everything works together for massive, balanced sound.

Factory Clean Fit With Jeep Tuned Performance

What makes this kit stand out isn’t just power, it’s how well it fits and performs inside your Jeep. The system comes with Jeep-specific DSP calibration, meaning the digital signal processing is already tuned for Wrangler acoustics to give you clearer vocals, tighter bass, and better overall balance right out of the box. It also integrates through CAN-Bus system detection, automatically loading the correct vehicle audio profile so you’re not stuck manually dialing everything in. On top of that, the adjustable bass control interface gives you real-time subwoofer control right from an OEM-style dash-mounted knob, so you can tweak your low end without stopping the ride.

 

 

Built Tough, Installs Clean, and Keeps Your Cargo Space

This system is designed for real off-road abuse while still keeping installation simple and clean. With true plug-and-play design, it uses OEM-style enclosures, factory connectors, and a T-harness system so there’s no cutting, splicing, or messy rewiring needed. It’s also Element Ready, meaning it’s built to resist water, mud, dust, vibration, and UV exposure without breaking down over time. The durable polyethylene construction with friction-welded seams adds serious strength against thermal shock and rough terrain, while the space-efficient slim subwoofer enclosure delivers deep bass without eating up your cargo room.

 


Frequently Asked Questions (FAQ)


  • • Why does the Stage 5 installation take so long?
    The kit is marketed as plug-and-play, but the complete installation involves removing the roof, cargo panels, sound bar, dash components, factory subwoofer, and other trim. Installation guides and retailers put the job around 6–8 hours, so it is considerably more involved than a simple speaker swap.
  • • Will 18WRNGLER-STG5 work with my two-door Wrangler?
    No. The Stage 5 kit is designed specifically for the 2018–2023 Jeep Wrangler JL Unlimited 4-door. Owners asking about two-door fitment have been told that the system is not designed for that configuration.
  • • Can I use this system with a 4xe Wrangler?
    Fitment needs special attention here. Retailer compatibility information specifically identifies some 4xe applications as incompatible, so checking the exact model year and factory configuration before purchasing is important.
  • • Why does the audio sound different after changing the factory radio?
    The amplifiers are pre-tuned for the factory source unit. If an aftermarket radio is installed, the amplifier input level needs to be matched using Rockford Fosgate's recommended C.L.E.A.N. procedure; changing the preset amplifier settings unnecessarily can create poor results and may affect warranty coverage.
  • • Why is the bass not as powerful as expected?
    The Stage 5 includes two 12-inch subwoofers and a dedicated M5-1000X1 amplifier, so weak bass should not automatically be blamed on the subwoofers. Check the amplifier configuration, DSP setup, wiring, and bass-level control first. Rockford Fosgate provides specific programming and tuning instructions for this system.
  • • Why does the system seem expensive compared with other Jeep audio upgrades?
    Cost is one of the concerns raised by potential buyers. In a Jeep forum discussion, an owner considering the Stage 5 specifically questioned whether the roughly $5,500 price was worthwhile. Other Jeep owners, however, described the system as a major improvement over the factory audio.
  • • Will the system still be loud enough with the Jeep top removed?
    That is one of the situations the Stage 5 is intended to address. The system uses high-output amplification and Jeep-specific DSP tuning, and an owner review reported being able to hear the music clearly with the top down.
  • • Why can the factory radio remain while getting a major audio upgrade?
    The Stage 5 does not require replacing the factory radio. It integrates with the Jeep's OEM system through a vehicle-specific DSP and wiring architecture, allowing the original radio interface to remain while the speakers, subwoofers, and amplification are upgraded.
  • • Why might the system require extra attention during installation?
    The kit replaces or adds several components at once, including dash tweeters, front speakers, overhead speakers, dual subwoofers, two amplifiers, DSP, wiring, and a fuse block. Because so many parts are integrated, a missed connector or incorrectly routed harness can affect multiple parts of the system.
  • • Why do some Wrangler owners still want additional sound insulation?
    A powerful audio system cannot completely eliminate the acoustic challenges of an open Wrangler. Owners discussing Wrangler audio have noted that adding a headliner or other sound-deadening treatment can make a noticeable difference, particularly in the noisy, unsealed cabin.

SPECIFICATIONS



FEATURES


Features:

  • 1,800-Watt High-Output System: Produces extreme audio power rated at 4x louder than base systems and nearly 2x louder than premium factory upgrades.
  • Complete Full-System Architecture: Includes dual 12” subwoofers, 6.5” coaxial speakers for front and overhead placement, 1” tweeters, and dual pre-tuned amplifiers rated at 1,000W and 800W.
  • Jeep-Specific DSP Calibration: Features preloaded digital signal processing tuned specifically for Jeep Wrangler acoustics to ensure optimized clarity, balance, and bass response.
  • Element Ready Protection: Engineered to withstand harsh off-road conditions with resistance to water, mud, dust, vibration, and UV exposure.
  • True Plug-and-Play Installation: Utilizes OEM-style enclosures, factory connectors, and a T-harness design to eliminate cutting, splicing, or complex rewiring.
  • Factory-Integrated Fit and Finish: Designed to seamlessly match Jeep interior aesthetics for a clean, professional-grade OEM appearance.
  • CAN-Bus System Integration: Automatically detects factory DSP signals and loads a vehicle-specific audio profile for optimized system performance.
  • Adjustable Bass Control Interface: Includes OEM-style dash-mounted bass knob for real-time subwoofer level adjustments.
  • Durable Polyethylene Construction: Built with high-strength PE materials and friction-welded seams for superior thermal shock and vibration resistance.
  • Space-Efficient Subwoofer Design: Slim, sealed enclosure maximizes bass output while preserving essential cargo space.
  • Minimal Vehicle Modification: Designed for direct-fit installation with only minor accessory relocation required on select models.

 

Specifications:

  • Total Power Output: 1,800 Watts
  • Amplifiers: M5-1000X1 (1,000W Monoblock Amp, Jeep-Tuned), M5-800X4 (800W 4-Channel Amp, Jeep-Tuned)
  • Speakers: (2) M2-TS 1” Dash Tweeters with Bezels, (2) TMS65 6.5” Front Speakers with Enclosures, (2) TMS65 6.5” Overhead Speakers with Enclosures
  • Subwoofers: (2) T1S2-12 12” Slim Subwoofers in Sealed Enclosures
  • Audio Processing: Dedicated DSP with Jeep-Specific Tune, CAN-Bus Audio Integration
  • Controls & Accessories: PLC2 Bass Level Control + Custom Knob, Complete Wiring Kit with Fuse Block, 12V Relocation Kit (if needed)
  • Material: Durable PE with Friction Welded Seams
  • Weather & Shock Resistance: Element Ready™ (UV, water, dirt, and mud resistant)
  • Enclosure Design: OEM-style mounting with factory connectors
  • Additional Item: Custom Rockford Fosgate Duck Included
  • UPC: 780687360481
  • Weight: 132.3
  • Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.

Do you own this product?

Write a review!

Must haves for Rockford Fosgate 18WRNGLER-STG5:

Other items that might interest you:

Other customers also shopped for: