SSV Works KX-Q3V1 V-Spec 3-Speaker Plug and Play Kit (6.5” Front-Kick Pods with Speakers, 10" Subwoofer, Phase EQ Amplifier, and JVC MR3) for 2020-2024 2-Seater Kawasaki Teryx KRX1000
We are a SSV Works authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • JVC MR3 Headunit w/ Backup Camera
- • RGB Light Controller
- • 6.5" Front Kick Speaker-Pods w/ 160w SSV Works Speakers
- • 10" 1000w Subwoofer-Enclosure with SSV Works Subwoofer
- • Phase EQ Amplifier with Pre-Mounted Direct-Fit Amp Mounting Plate
- • Plug and Play Wiring Kit
- • Owner's Manual
Revolutionize Your Ride with Premium Off-Road Audio
Transform your 2020+ 2-Seater Kawasaki KRX1000 with the ultimate plug and play audio kit—no cutting, no crimping, just seamless installation and powerful, crystal-clear sound. Designed by SSV Works, the pioneers of off-road audio, this system is built to handle the toughest terrains while delivering premium, high-fidelity audio. With our patented Phase EQ™ amplifier and Rock and Ride™ switch, you get the perfect sound whether you're tearing up the trails or unwinding at camp. Less time wrenching, more time riding—upgrade your adventure today!
Frequently Asked Questions (FAQ)
- • Why does the JVC receiver forget my settings after the KRX1000 is turned off
Check the receiver's constant-power and switched-power connections. If the memory wire is not receiving continuous power, saved settings and preferences may disappear whenever the vehicle is shut down.
- • Why does the backup camera stay black even though the JVC display turns on?
Verify the camera video connection and reverse-trigger wire separately. The included JVC receiver supports a backup camera, so a blank image can result from the camera signal or reverse-input connection rather than the display itself.
- • Why does the audio suddenly sound different when I switch from RIDE to ROCK?
The change is intentional. The Phase EQ amplifier uses different DSP profiles: RIDE compensates for wind, engine noise, and helmet use, while ROCK is tuned for listening outside the vehicle.
- • What happens if the subwoofer is connected to the wrong amplifier channel?
The system uses a dedicated 5-channel amplifier with a separate subwoofer channel. Incorrect channel connections can result in reduced bass, unusual output, or an improperly balanced system, so the amplifier wiring should match the supplied installation diagram.
- • Why do the speaker lights stay on one color even when I try to change them?
Check the RGB controller and lighting connectors independently from the speaker wiring. The audio system can continue playing normally even when the RGB-control side has a connection or controller issue.
- • Could an aftermarket light bar or cage accessory block the front speaker-pod installation?
Yes. Although the speaker enclosures are vehicle-specific, previously installed cage accessories can occupy nearby mounting or routing areas. Inspect the available space before securing the pods rather than forcing them into position.
- • Why does the JVC connect to a different phone instead of the one I normally use?
Multiple previously paired devices can create connection confusion when more than one phone is present. Remove unused pairings or manually select the desired device from the receiver before starting playback.
- • Why does the audio system appear to struggle when several accessories are running at the same time?
The Phase EQ amplifier can draw up to 60 amps, so the vehicle's electrical system and installation wiring need to be in good condition. Weak battery voltage, poor connections, or excessive accessory demand can affect amplifier operation.
- • Why does the 10-inch subwoofer produce a buzzing or rattling sound over rough terrain?
Inspect the enclosure mounting points, subwoofer fasteners, grille, and nearby KRX1000 panels. Off-road vibration can make a loose mounting point sound like a damaged speaker even when the driver itself is functioning normally.
- • Can I use the KX-Q3V1 if I have a four-seat KRX model?
No. The KX-Q3V1 is specifically designed around the 2-seat KRX1000, and the vehicle-specific enclosures and mounting locations should not be assumed to transfer to a 4-seat model.
Features:
- Plug and Play: No soldering, cutting, or crimping required! Simply bolt down the speaker enclosures with pre-installed speakers, run the vehicle-specific plug-&-play wiring, turn the key, and go. Designed for easy installation so you spend less time wrenching and more time riding.
- Factory Fit and Finish: Each kit is purpose-built to match factory styling with a seamless fit, making it look like it came straight from the factory.
- Trail Ready: Engineered for off-road conditions, SSV Works audio components are built to withstand sand, dust, water, and snow—so you can enjoy premium audio no matter where you ride.
- Premium Quality: Features our patented Phase EQ™ amplifier and Rock and Ride™ switch to deliver top-tier sound performance for your UTV.
- Phase EQ™:
- Advanced Digital Signal Processing (DSP) tuning optimized specifically for your vehicle and audio kit.
- - Enhances frequencies for superior sound, regardless of your riding style.
- Delivers maximum power output, outperforming larger amplifiers.
- Provides luxury vehicle-level audio processing for an unparalleled listening experience.
- Rock and Ride™ Switch:
- Installs in a standard rocker-switch location and allows switching between multiple audio profiles.
- RIDE Mode: Optimizes audio for in-cab listening while compensating for wind, engine noise, and helmet use.
- ROCK Mode: Tunes the sound for the best outdoor listening experience—perfect for relaxing at camp.
Specifications:
Package
- Compatible Vehicle Types: ATV/UTV
- Included Components: Bluetooth Rocker-Switch Media-Center, Pair of Speakers in Custom-Fit Enclosures, Custom Fit Loaded Subwoofer Enclosure, Marine/Powersports Amplifier
- IPX Rating: IPX-6
- Marine Certified: Yes
Stereo Receiver
- Model: 2.7" Marine Digital Multimedia Receiver with Bluetooth, RGB Illumination (SiriusXM Ready)
- Key Features: SiriusXM Ready, USB input, Aux input
- Bluetooth Features: Built-in Microphone
- Volume Control Type: Buttons
- Wireless Remote: Yes
- Preamp RCA Outputs: 3 Sets (6-channel)
- Dedicated Subwoofer Preamp RCA Output: Yes
- Preamp Voltage: 2 volts
- Built-In Equalizer: 13-Band EQ
- FM Presets: 18
- AM Presets: 12
- WB Presets: 6
- LCD Screen Size: 2.7"
- Peak Power Output: 50 watts x 4 channel
- RMS Power Output: 26 watts x 4 channel
- Inputs: Auxiliary (Rear), Backup Camera, USB (Rear)
Speaker
- Includes: Pair of 6.5" Front Kick Speaker-Pods preloaded in custom-fit enclosures
- Number of Speakers: 2
- Illumination: Multi-color RGB LED lights
- Speaker Grilles: Yes
Amplifier
- Model: 800W RMS Powersports Amplifier with Pre-Mounted Direct-Fit Amp Mounting Plate
- Number of Channels: 5-Channel
- Total RMS Power Output: 800 watts
- Amplifier Class: D
Subwoofer
- Model: 10" SSV Works Subwoofer preloaded in a Factory-fit Enclosure
- Subwoofer Size: 10"
- Number of Subwoofers: 1
- Subwoofer Peak Power: 1000 watts
- Subwoofer RMS Power: 500 watts
- Subwoofer Grille: Yes - Included
Other Component
- Additional Features: Includes patented Phase EQ™ amplifier, Rock ‘N Ride™ switch to power new audio kit for UTV
- UPC: 815172019213
- Weight: 50.5
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
