SSV Works RG4-1VRC SSV Works V102 10" 500W RMS (1000W Peak Power Handling) Subwoofer with Enclosure and Kicker Amplifier for 2018-2024 Polaris Ranger XP1000, Ride Command Ready
We are a SSV Works authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • SSV Works 10" 1000-watt (500W RMS) Subwoofer
- • Kicker 500-watt Mono Amplifier
- • Amplifier Mounting Tray
- • Plug and Play Wiring
- • Owner's Manual
Unleash Deep, Trail-Ready Bass in Minutes
Upgrade your Polaris® Ranger XP1000 with the SSV Works Plug and Play 10” Subwoofer, delivering deep, powerful bass with zero hassle. No cutting, no crimping—just a seamless factory fit and rugged durability built for any terrain. Whether you're kicking up dust or charging through mud, this subwoofer keeps your ride loud and adrenaline high. Less time wrenching, more time riding—experience the difference with SSV Works.
Frequently Asked Questions (FAQ)
- • Why does the subwoofer have power but produce little bass?
Check the amplifier gain, low-pass filter, bass boost, and Ride Command signal. Incorrect settings can make the 10" subwoofer sound much weaker than expected.
- • Why does the bass disappear when the volume gets high?
The amplifier may be reaching its protection limit because of heat, overload, or a wiring issue. Check the amplifier's status light and speaker connections.
- • Can the Ride Command system control this subwoofer?
Yes. The RG4-1VRC is specifically designed as a plug-and-play 10" subwoofer upgrade for compatible Polaris Ranger XP1000 Ride Command systems.
- • Why does the amplifier turn on but the subwoofer stays silent?
Inspect the speaker-level input, amplifier output wiring, and subwoofer terminals. A loose connector can leave the amplifier powered while preventing audio from reaching the woofer.
- • Does installing the kit require cutting factory wiring?
No. The system uses vehicle-specific plug-and-play wiring and is designed to install without soldering, cutting, or crimping.
- • Why does the enclosure rattle on rough trails?
Loose mounting hardware or nearby Ranger panels can create vibration noise. Recheck the enclosure mounting tray and all fasteners if rattling develops.
- • Can the amplifier shut down because of overheating?
Yes. The included Kicker Class D amplifier has thermal, overload, and speaker-short protection, so excessive heat or an electrical problem can activate its protection circuitry.
- • Why does the bass sound too boomy after installation?
The amplifier includes variable bass boost and an adjustable low-pass filter. Excessive bass boost or an unsuitable crossover point can make the subwoofer sound loose or overpowering.
- • Will this kit fit any Polaris Ranger XP1000?
Not necessarily. The RG4-1VRC is listed for select 2018–2024 Ranger XP1000 applications, so verify the exact year and factory audio/Ride Command configuration before installation.
- • What should I check if the bass cuts out after driving through rough terrain?
Inspect the power, ground, signal, and speaker connections for movement or looseness. Since the system is designed for off-road use, securing the wiring properly is especially important.
Features:
- Plug-&-Play: No soldering, cutting, or crimping required! Simply bolt down the speaker enclosures with the pre-installed speakers, run the vehicle-specific plug-&-play wiring, turn the key, and go. Designed for easy installation, so you spend less time wrenching and more time riding.
- Factory Fit and Finish: Designed to look like it came straight from the factory. Our enclosures match factory styling and fit with seamless precision.
- Trail Ready: Built to withstand off-road conditions, including sand, dust, water, and snow. Enjoy premium audio performance no matter where your ride takes you.
Specifications:
10" SSV Works Subwoofer with Enclosure
- Preloaded into a custom-fit enclosure
- Injection-molded UV-treated polypropylene cone
- Santoprene surround
- Power Handling:
- Peak Power: 1000 watts
- RMS Power: 500 watts
- Performance:
- Sensitivity: 84.8 dB
- Frequency Response: 25-500 Hz
500W Monoblock Kicker Amplifier
- Class-D technology
- Optional CXARC wired remote bass control (Kicker CXRC)
- Wired remote bass level control included
- LED indicators for power (green) and protection (red)
- 3-Way Protection Circuitry:
- Thermal protection
- Overload protection
- Speaker short protection
- Power Specifications:
- 4-ohm: 250 watts x 1 channel
- 2-ohm: 500 watts x 1 channel
- Total RMS Power Output: 300 watts
- Input Sensitivity:
- Low Level: 125mV - 5 volts
- High Level: 250mV - 10 volts
- Performance & Filters:
- Frequency Response: 25 - 120Hz
- Total Harmonic Distortion (THD): 1%
- Signal-to-Noise Ratio: 95 dB
- Selectable Low Pass Filter: 60Hz, 80Hz, 100Hz, or 120Hz
- Subsonic Filter: 25Hz
- Selectable Bass Boost: 0 or +6dB @ 40Hz
- UPC: 815172020196
- Weight: 37
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
