SSV Works RG4-Q3VRC V-Spec 3-Speaker Plug and Play Audio System (6.5" Front-Kick Pods with Speakers, 10" Subwoofer, Phase EQ Amplifier, and Controller) for 2018-2024 Polaris Ranger XP1000, Ride Command Ready
We are a SSV Works authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
-
- • RGB Light Controller
- • 6.5" Front Kick Speaker-Pods w/120w SSV Works Lighted Speakers
- • 10" 1000w Subwoofer-Enclosure with SSV Works Subwoofer
- • Phase EQ Amplifier with Pre-Mounted Direct-Fit Amp Mounting Plate
- • Plug and Play Wiring Kit
- • Owner's Manual
Unleash Premium Sound on Every Ride
Take your off-road adventures to the next level with our Full Plug & Play Audio Kit, designed specifically for the Polaris® Ranger XP1000 with Ride Command. Built tough for any terrain—sand, dust, water, or snow—this system delivers crystal-clear, powerful sound without compromise. Featuring our cutting-edge Phase EQ technology, it optimizes audio frequencies for rich, immersive sound, just like a luxury vehicle. Easy to install and built to perform, this is the upgrade your ride deserves!
Frequently Asked Questions (FAQ)
- • Why does installing the RG4-Q3VRC require removing several factory dash panels?
Although the audio connections are plug-and-play, the installation still requires access behind the dash for the amplifier, wiring, and Ride Command integration. The installation guide calls for removing the gauge cluster, cup holder, glove box, and several dash panels.
- • What happens if the audio system powers on but the Ranger battery connection was installed incorrectly?
Check the main fuse holder, positive battery cable, ground connection, and amplifier power harness. The installation instructions specifically require the fuse holder to be installed between the amplifier power harness and battery connection.
- • Why should I secure the audio wiring away from the center of the Ranger?
Loose wiring routed near the center column can potentially move toward drivetrain components during operation. SSV Works specifically instructs installers to secure the factory and audio wiring along the center column away from the drive shaft.
- • Why does the Ride Command screen work while the new speakers produce no audio?
A functioning Ride Command display does not necessarily confirm that the amplifier is receiving its audio signal. Check the Ride Command connection, amplifier harness, signal connections, and amplifier power separately.
- • Why does the sound change dramatically when switching between ROCK and RIDE?
This is intentional. The Phase EQ amplifier uses different tuning profiles: ROCK is optimized for listening outside or while parked, while RIDE compensates for wind, engine noise, and frequencies affected by helmet use.
- • Why do the speakers play normally when the RGB lighting controller does not respond?
The audio and RGB functions use separate connections, so a lighting-control problem does not necessarily indicate a speaker failure. Inspect the RGB controller wiring, power connection, and lighting connectors independently from the audio harness.
- • Why does the bass seem different while driving compared with when the Ranger is parked?
The open-cabin environment, engine noise, wind, and helmet use can dramatically change perceived bass. The RIDE profile is specifically designed to compensate for these conditions.
- • Why is a drill listed as an installation tool if the system is advertised as plug-and-play?
Plug-and-play refers primarily to the electrical connections rather than eliminating every physical installation step. The official installation instructions list a drill with 3/32" and 9/16" bits, along with several Torx drivers and a Phillips screwdriver.
- • What should I inspect if the system becomes quiet after extended high-volume use?
Check amplifier ventilation, power and ground connections, speaker wiring, and whether the amplifier has entered a protection state. The kit uses an 800-watt, 5-channel Class D amplifier, so proper installation and secure electrical connections are important under heavy loads.
- • Why won't the Ranger's dash panels fit back correctly after the audio installation?
Before reinstalling the panels, make sure the new wiring is routed and secured without being pinched behind the factory trim. The installation sequence involves removing numerous push pins and panels, so misplaced harnesses can prevent the dash from sitting correctly during reassembly.
Features:
- Plug-&-Play: Easy installation so you spend less time wrenching and more time riding.
- Factory Fit and Finish: Designed to match factory styling with a seamless fit.
- Trail Ready: Built to withstand sand, dust, water, and snow for premium off-road audio.
- Phase EQ: Advanced DSP tuning optimizes audio frequencies for superior sound quality, maximizing power output.
- Rock ‘N Ride Switch:
- RIDE Mode: Enhances audio for in-cab listening by compensating for wind, engine noise, and helmet use.
- ROCK Mode: Optimizes sound for outdoor listening, perfect for campfire gatherings.
Specifications:
Package
- Compatible Vehicle Types: ATV/UTV
- Included Components: Pair of speakers in custom-fit enclosures, Custom-fit loaded subwoofer enclosure, Marine/Powersports amplifier
- IPX Rating: IPX-6
- Marine Certified: Yes
Speaker
- Speakers: Pair of 6.5" Front Kick Speaker-Pods in custom-fit enclosures
- Number of Speakers: 2
- Illumination: Multi-color RGB LED lights
- Speaker Grilles: Yes
Amplifier
- Amplifier Type: 800W RMS Powersports amplifier with pre-mounted direct-fit amp mounting plate
- Number of Channels: 5-channel
- Total RMS Power Output: 800 watts
- Amplifier Class: D
Subwoofer
- Subwoofer: 10" SSV Works subwoofer in a factory-fit enclosure for easy installation
- Subwoofer Size: 10"
- Number of Subwoofers: 1
- Subwoofer Peak Power: 1000 watts
- Subwoofer RMS Power: 500 watts
- Subwoofer Grille: Yes - Included
Other Component
- Additional Features: Patented Phase EQ™ amplifier, Rock ‘N Ride™ switch for UTV audio kit power
- UPC: 815172019237
- Weight: 50.5
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
