SSV Works RG4-Q3A1 3-Speaker Upgrade Kit for select 2018-2024 Polaris Ranger XP1000 A-Spec models
We are a SSV Works authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • MRB3 Bluetooth Media Unit with Vehicle-Specific Dash Kit
- • 6.5" Front Kick Speaker Pods with SSV Works Speakers
- • 10" Subwoofer Enclosure with SSV Works Subwoofer
- • Phase EQ Amplifier with Pre-Mounted Direct-Fit Amp Mounting Plate
- • Plug-&-Play Wiring Kit
Ultimate Plug-&-Play Audio Upgrade for Your Off-Road Adventures
Upgrade your ride with a Plug-&-Play audio system—no cutting or crimping required! Designed for a Factory Fit, it blends seamlessly with your vehicle. Built Trail Ready, it withstands sand, dust, water, and snow for premium sound anywhere. Enjoy Premium Quality with our Phase EQ™ amplifier and Rock and Ride™ switch, delivering optimized, DSP-tuned audio with easy profile switching for every adventure!
Frequently Asked Questions (FAQ)
- • Why won't the new power cable stay securely on my Ranger's battery terminal?
A loose battery connection can cause intermittent audio or prevent the amplifier from starting. Make sure the supplied battery terminal cable is seated correctly and that the fuse holder is installed between the amplifier power harness and battery connection.
- • What if the JVC receiver powers up but the buttons or audio functions do not respond correctly?
Recheck the JVC-to-SSV harness adapter and every connection behind the dash. The system uses a dedicated adapter and audio splitter, so a partially connected plug can cause specific functions to stop working.
- • Why does the bass sound unusually thin after installing the subwoofer?
Incorrect positive and negative speaker connections can cause phase cancellation and make the bass seem weak. Verify the subwoofer wiring against the supplied wiring diagram before changing amplifier settings. The kit uses a loaded 10-inch, 2-ohm subwoofer enclosure.
- • Why do the front kick pods seem difficult to line up with the Ranger's factory panels?
The kick pods are designed around specific mounting locations, so incorrect positioning can make the enclosure appear misaligned. Check the left/right pod placement and mounting points before tightening everything down.
- • Why does the amplifier switch appear to work differently from the stereo power button?
The system has a dedicated amplifier rocker switch in addition to the media receiver. Make sure both the receiver and amplifier are receiving the correct power/turn-on signals rather than assuming the head unit alone controls the entire audio system.
- • What if one of the supplied speaker cables seems too short during installation?
Avoid pulling tightly on the harness. The kit uses dedicated extension harnesses, including an 8-foot speaker extension and an 8-foot subwoofer extension, so routing the cables along the intended path can provide the necessary reach.
- • Can heavy mud or water exposure cause temporary changes in speaker performance?
Yes, contamination around connectors or speaker components can affect performance even though the system is designed for harsh outdoor environments. After a particularly muddy ride, inspect accessible connections and allow wet components to dry before diagnosing an electronic failure.
- • Why is there barely enough room for all the new wiring behind the Ranger dash?
The installation adds several harnesses, including the JVC adapter, audio splitter, amplifier wiring, and power connections. Route and secure the cables before reinstalling the factory panels so they are not pinched or pulled when the dash is closed.
- • What symptoms can appear if the amplifier ground connection is poor?
A weak ground can contribute to intermittent operation, unwanted noise, or an amplifier that fails to operate properly. The installation instructions specify connecting the ground ring terminal to a suitable chassis-ground location, so this connection should be checked carefully.
- • Why won't the Ranger's original panels snap back into place after the audio installation?
The installation requires substantial dash and panel disassembly. If a panel will not seat correctly, inspect the new harness routing for wires trapped behind clips or mounting points before forcing the trim back into position.
Features:
- Plug-&-Play: No soldering, cutting, or crimping required! Simply bolt down the enclosures, connect the plug-&-play wiring, turn the key, and go.
- Factory Fit and Finish: Designed to match factory styling with a seamless, precision fit.
- Trail Ready: Built to withstand sand, dust, water, and snow for premium off-road audio performance.
- Premium Quality: Features a patented Phase EQ™ amplifier and Rock and Ride™ switch for superior sound.
- Phase EQ: DSP-tuned amplifier custom-tailored for your vehicle, optimizing frequencies for the best sound experience.
- Rock and Ride: Patented rocker-switch control for quick switching between multiple audio profiles.
- UPC: 815172019671
- Weight: 50.5
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
